From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Hugues Fruchet Subject: [PATCH v2 2/3] dt-bindings: ov5640: Add "rotation" property Date: Mon, 18 Jun 2018 12:29:18 +0200 Message-ID: <1529317759-28657-3-git-send-email-hugues.fruchet@st.com> In-Reply-To: <1529317759-28657-1-git-send-email-hugues.fruchet@st.com> References: <1529317759-28657-1-git-send-email-hugues.fruchet@st.com> MIME-Version: 1.0 Content-Type: text/plain To: Steve Longerbeam , Sakari Ailus , Hans Verkuil , "Mauro Carvalho Chehab , Rob Herring" , Mark Rutland Cc: devicetree@vger.kernel.org, linux-media@vger.kernel.org, "Hugues Fruchet , Benjamin Gaignard" , Maxime Ripard List-ID: Add the rotation property to the list of optional properties for the OV5640 camera sensor. Signed-off-by: Hugues Fruchet --- Documentation/devicetree/bindings/media/i2c/ov5640.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt index 8e36da0..c97c2f2 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt @@ -13,6 +13,10 @@ Optional Properties: This is an active low signal to the OV5640. - powerdown-gpios: reference to the GPIO connected to the powerdown pin, if any. This is an active high signal to the OV5640. +- rotation: as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt, + valid values are 0 (sensor mounted upright) and 180 (sensor + mounted upside down). The device node must contain one 'port' child node for its digital output video port, in accordance with the video interface bindings defined in @@ -51,6 +55,7 @@ Examples: DVDD-supply = <&vgen2_reg>; /* 1.5v */ powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + rotation = <180>; port { /* MIPI CSI-2 bus endpoint */ -- 1.9.1