From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lucas Stach Subject: Re: [PATCH] ARM: dts: imx6: RIoTboard Add chosen stdout-path property Date: Mon, 18 Jun 2018 18:03:17 +0200 Message-ID: <1529337797.7211.4.camel@pengutronix.de> References: <20180618154257.16919-1-manu@freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20180618154257.16919-1-manu@freebsd.org> Sender: linux-kernel-owner@vger.kernel.org To: Emmanuel Vadot , shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, fabio.estevam@nxp.com, linux-imx@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Am Montag, den 18.06.2018, 17:42 +0200 schrieb Emmanuel Vadot: > The RIoTboard debug uart is connected to serial1. > Add a chosen property in the DTS so OS knows what serial port to use for > the console. > > > Signed-off-by: Emmanuel Vadot > --- >  arch/arm/boot/dts/imx6dl-riotboard.dts | 4 ++++ >  1 file changed, 4 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts > index 2e98c92adff7..315d2ae6fa45 100644 > --- a/arch/arm/boot/dts/imx6dl-riotboard.dts > +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts > @@ -19,6 +19,10 @@ > >   reg = <0x10000000 0x40000000>; > >   }; >   > > + chosen { > + stdout-path = "serial1:115200n8"; If there a reason to deviate from the "stdout-path = &uart1;" notation used by other i.MX boards? Regards, Lucas > + }; > + > >   regulators { > >   compatible = "simple-bus"; > >   #address-cells = <1>;