* [PATCH 1/4] edac: synps: Add platform specific structures for ddrc controller
2018-07-19 10:14 [PATCH 0/4] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
@ 2018-07-19 10:14 ` Manish Narani
2018-07-19 10:14 ` [PATCH 2/4] dt: bindings: Document ZynqMP DDRC in Synopsys documentation Manish Narani
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Manish Narani @ 2018-07-19 10:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, devicetree, catalin.marinas, will.deacon,
mdf, willw, naga.sureshkumar.relli, edgar.iglesias,
bharat.kumar.gogada, shubhrajyoti.datta, stefan.krsmanovic
Cc: anirudh, sgoud, Manish Narani
This patch adds platform specific structures, so that we can add
different IP support later using quirks.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 70 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 58 insertions(+), 12 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0c9c59e..447396e 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -22,6 +22,7 @@
#include <linux/edac.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include "edac_module.h"
@@ -95,6 +96,9 @@
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
+/* DDR ECC Quirks */
+#define DDR_ECC_INTR_SUPPORT BIT(0)
+
/**
* struct ecc_error_info - ECC error log information
* @row: Row number
@@ -130,6 +134,7 @@ struct synps_ecc_status {
* @baseaddr: Base address of the DDR controller
* @message: Buffer for framing the event specific info
* @stat: ECC status information
+ * @p_data: Pointer to platform data
* @ce_cnt: Correctable Error count
* @ue_cnt: Uncorrectable Error count
*/
@@ -137,11 +142,29 @@ struct synps_edac_priv {
void __iomem *baseaddr;
char message[SYNPS_EDAC_MSG_SIZE];
struct synps_ecc_status stat;
+ const struct synps_platform_data *p_data;
u32 ce_cnt;
u32 ue_cnt;
};
/**
+ * struct synps_platform_data - synps platform data structure
+ * @synps_edac_geterror_info: function pointer to synps edac error info
+ * @synps_edac_get_mtype: function pointer to synps edac mtype
+ * @synps_edac_get_dtype: function pointer to synps edac dtype
+ * @synps_edac_get_eccstate: function pointer to synps edac eccstate
+ * @quirks: to differentiate IPs
+ */
+struct synps_platform_data {
+ int (*synps_edac_geterror_info)(void __iomem *base,
+ struct synps_ecc_status *p);
+ enum mem_type (*synps_edac_get_mtype)(const void __iomem *base);
+ enum dev_type (*synps_edac_get_dtype)(const void __iomem *base);
+ bool (*synps_edac_get_eccstate)(void __iomem *base);
+ int quirks;
+};
+
+/**
* synps_edac_geterror_info - Get the current ecc error info
* @base: Pointer to the base address of the ddr memory controller
* @p: Pointer to the synopsys ecc status structure
@@ -242,7 +265,8 @@ static void synps_edac_check(struct mem_ctl_info *mci)
struct synps_edac_priv *priv = mci->pvt_info;
int status;
- status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
+ status = priv->p_data->synps_edac_geterror_info(priv->baseaddr,
+ &priv->stat);
if (status)
return;
@@ -372,10 +396,12 @@ static int synps_edac_init_csrows(struct mem_ctl_info *mci)
for (j = 0; j < csi->nr_channels; j++) {
dimm = csi->channels[j]->dimm;
dimm->edac_mode = EDAC_FLAG_SECDED;
- dimm->mtype = synps_edac_get_mtype(priv->baseaddr);
+ dimm->mtype = priv->p_data->synps_edac_get_mtype(
+ priv->baseaddr);
dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels;
dimm->grain = SYNPS_EDAC_ERR_GRAIN;
- dimm->dtype = synps_edac_get_dtype(priv->baseaddr);
+ dimm->dtype = priv->p_data->synps_edac_get_dtype(
+ priv->baseaddr);
}
}
@@ -423,6 +449,21 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
return status;
}
+static const struct synps_platform_data zynq_edac_def = {
+ .synps_edac_geterror_info = synps_edac_geterror_info,
+ .synps_edac_get_mtype = synps_edac_get_mtype,
+ .synps_edac_get_dtype = synps_edac_get_dtype,
+ .synps_edac_get_eccstate = synps_edac_get_eccstate,
+ .quirks = 0,
+};
+
+static const struct of_device_id synps_edac_match[] = {
+ { .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, synps_edac_match);
+
/**
* synps_edac_mc_probe - Check controller and bind driver
* @pdev: Pointer to the platform_device struct
@@ -440,13 +481,22 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
int rc;
struct resource *res;
void __iomem *baseaddr;
+ const struct of_device_id *match;
+ const struct synps_platform_data *p_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
baseaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(baseaddr))
return PTR_ERR(baseaddr);
- if (!synps_edac_get_eccstate(baseaddr)) {
+ match = of_match_node(synps_edac_match, pdev->dev.of_node);
+ if (!match && !match->data) {
+ dev_err(&pdev->dev, "of_match_node() failed\n");
+ return -EINVAL;
+ }
+
+ p_data = (struct synps_platform_data *)match->data;
+ if (!(p_data->synps_edac_get_eccstate(baseaddr))) {
edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
return -ENXIO;
}
@@ -468,6 +518,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
priv = mci->pvt_info;
priv->baseaddr = baseaddr;
+ priv->p_data = match->data;
+
rc = synps_edac_mc_init(mci, pdev);
if (rc) {
edac_printk(KERN_ERR, EDAC_MC,
@@ -486,7 +538,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
* Start capturing the correctable and uncorrectable errors. A write of
* 0 starts the counters.
*/
- writel(0x0, baseaddr + ECC_CTRL_OFST);
+ if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT))
+ writel(0x0, baseaddr + ECC_CTRL_OFST);
return rc;
free_edac_mc:
@@ -511,13 +564,6 @@ static int synps_edac_mc_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id synps_edac_match[] = {
- { .compatible = "xlnx,zynq-ddrc-a05", },
- { /* end of table */ }
-};
-
-MODULE_DEVICE_TABLE(of, synps_edac_match);
-
static struct platform_driver synps_edac_mc_driver = {
.driver = {
.name = "synopsys-edac",
--
2.1.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/4] edac: synopsys: Add EDAC ECC support for ZynqMP DDRC
2018-07-19 10:14 [PATCH 0/4] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
2018-07-19 10:14 ` [PATCH 1/4] edac: synps: Add platform specific structures for ddrc controller Manish Narani
2018-07-19 10:14 ` [PATCH 2/4] dt: bindings: Document ZynqMP DDRC in Synopsys documentation Manish Narani
@ 2018-07-19 10:14 ` Manish Narani
2018-07-19 10:14 ` [PATCH 4/4] arm64: zynqmp: Add DDRC node Manish Narani
3 siblings, 0 replies; 7+ messages in thread
From: Manish Narani @ 2018-07-19 10:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, devicetree, catalin.marinas, will.deacon,
mdf, willw, naga.sureshkumar.relli, edgar.iglesias,
bharat.kumar.gogada, shubhrajyoti.datta, stefan.krsmanovic
Cc: anirudh, sgoud, Manish Narani
This patch adds EDAC ECC support for ZynqMP DDRC IP. The patch also adds
support for ECC Error Injection in ZynqMP. The corrected and uncorrected
error interrupts support is added in this patch. The Row, Column, Bank,
Bank Group and Rank bits positions are determined via Address Map
registers of Synopsys DDRC.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/Kconfig | 2 +-
drivers/edac/synopsys_edac.c | 848 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 833 insertions(+), 17 deletions(-)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 57304b2..b1fc7a16 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -441,7 +441,7 @@ config EDAC_ALTERA_SDMMC
config EDAC_SYNOPSYS
tristate "Synopsys DDR Memory Controller"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ || ARM64
help
Support for error detection and correction on the Synopsys DDR
memory controller.
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 447396e..4380eb9 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -22,6 +22,7 @@
#include <linux/edac.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/of.h>
#include "edac_module.h"
@@ -98,6 +99,164 @@
/* DDR ECC Quirks */
#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
+
+/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
+/* ECC Configuration Registers */
+#define ECC_CFG0_OFST 0x70
+#define ECC_CFG1_OFST 0x74
+
+/* ECC Status Register */
+#define ECC_STAT_OFST 0x78
+
+/* ECC Clear Register */
+#define ECC_CLR_OFST 0x7C
+
+/* ECC Error count Register */
+#define ECC_ERRCNT_OFST 0x80
+
+/* ECC Corrected Error Address Register */
+#define ECC_CEADDR0_OFST 0x84
+#define ECC_CEADDR1_OFST 0x88
+
+/* ECC Syndrome Registers */
+#define ECC_CSYND0_OFST 0x8C
+#define ECC_CSYND1_OFST 0x90
+#define ECC_CSYND2_OFST 0x94
+
+/* ECC Bit Mask0 Address Register */
+#define ECC_BITMASK0_OFST 0x98
+#define ECC_BITMASK1_OFST 0x9C
+#define ECC_BITMASK2_OFST 0xA0
+
+/* ECC UnCorrected Error Address Register */
+#define ECC_UEADDR0_OFST 0xA4
+#define ECC_UEADDR1_OFST 0xA8
+
+/* ECC Syndrome Registers */
+#define ECC_UESYND0_OFST 0xAC
+#define ECC_UESYND1_OFST 0xB0
+#define ECC_UESYND2_OFST 0xB4
+
+/* ECC Poison Address Reg */
+#define ECC_POISON0_OFST 0xB8
+#define ECC_POISON1_OFST 0xBC
+
+#define ECC_ADDRMAP0_OFFSET 0x200
+
+/* Control register bitfield definitions */
+#define ECC_CTRL_BUSWIDTH_MASK 0x3000
+#define ECC_CTRL_BUSWIDTH_SHIFT 12
+#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
+#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
+
+/* DDR Control Register width definitions */
+#define DDRCTL_EWDTH_16 2
+#define DDRCTL_EWDTH_32 1
+#define DDRCTL_EWDTH_64 0
+
+/* ECC status register definitions */
+#define ECC_STAT_UECNT_MASK 0xF0000
+#define ECC_STAT_UECNT_SHIFT 16
+#define ECC_STAT_CECNT_MASK 0xF00
+#define ECC_STAT_CECNT_SHIFT 8
+#define ECC_STAT_BITNUM_MASK 0x7F
+
+/* DDR QOS Interrupt register definitions */
+#define DDR_QOS_IRQ_STAT_OFST 0x20200
+#define DDR_QOSUE_MASK 0x4
+#define DDR_QOSCE_MASK 0x2
+#define ECC_CE_UE_INTR_MASK 0x6
+#define DDR_QOS_IRQ_EN_OFST 0x20208
+#define DDR_QOS_IRQ_DB_OFST 0x2020C
+
+/* ECC Corrected Error Register Mask and Shifts*/
+#define ECC_CEADDR0_RW_MASK 0x3FFFF
+#define ECC_CEADDR0_RNK_MASK BIT(24)
+#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
+#define ECC_CEADDR1_BNKNR_MASK 0x70000
+#define ECC_CEADDR1_BLKNR_MASK 0xFFF
+#define ECC_CEADDR1_BNKGRP_SHIFT 24
+#define ECC_CEADDR1_BNKNR_SHIFT 16
+
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON1_BANKGRP_SHIFT 28
+#define ECC_POISON1_BANKNR_SHIFT 24
+
+/* DDR Memory type defines */
+#define MEM_TYPE_DDR3 0x1
+#define MEM_TYPE_LPDDR3 0x8
+#define MEM_TYPE_DDR2 0x4
+#define MEM_TYPE_DDR4 0x10
+#define MEM_TYPE_LPDDR4 0x20
+
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_DEV_CONFIG_MASK 0xC0000000
+#define DDRC_MSTR_DEV_CONFIG_SHIFT 30
+#define DDRC_MSTR_DEV_CONFIG_X4_MASK 0x0
+#define DDRC_MSTR_DEV_CONFIG_X8_MASK 0x1
+#define DDRC_MSTR_DEV_CONFIG_X16_MASK 0x2
+#define DDRC_MSTR_DEV_CONFIG_X32_MASK 0x3
+
+#define DDR_MAX_ROW_SHIFT 18
+#define DDR_MAX_COL_SHIFT 14
+#define DDR_MAX_BANK_SHIFT 3
+#define DDR_MAX_BANKGRP_SHIFT 2
+
+#define ROW_MAX_VAL_MASK 0xF
+#define COL_MAX_VAL_MASK 0xF
+#define BANK_MAX_VAL_MASK 0x1F
+#define BANKGRP_MAX_VAL_MASK 0x1F
+#define RANK_MAX_VAL_MASK 0x1F
+
+#define ROW_B0_BASE 6
+#define ROW_B1_BASE 7
+#define ROW_B2_BASE 8
+#define ROW_B3_BASE 9
+#define ROW_B4_BASE 10
+#define ROW_B5_BASE 11
+#define ROW_B6_BASE 12
+#define ROW_B7_BASE 13
+#define ROW_B8_BASE 14
+#define ROW_B9_BASE 15
+#define ROW_B10_BASE 16
+#define ROW_B11_BASE 17
+#define ROW_B12_BASE 18
+#define ROW_B13_BASE 19
+#define ROW_B14_BASE 20
+#define ROW_B15_BASE 21
+#define ROW_B16_BASE 22
+#define ROW_B17_BASE 23
+
+#define COL_B2_BASE 2
+#define COL_B3_BASE 3
+#define COL_B4_BASE 4
+#define COL_B5_BASE 5
+#define COL_B6_BASE 6
+#define COL_B7_BASE 7
+#define COL_B8_BASE 8
+#define COL_B9_BASE 9
+#define COL_B10_BASE 10
+#define COL_B11_BASE 11
+#define COL_B12_BASE 12
+#define COL_B13_BASE 13
+
+#define BANK_B0_BASE 2
+#define BANK_B1_BASE 3
+#define BANK_B2_BASE 4
+
+#define BANKGRP_B0_BASE 2
+#define BANKGRP_B1_BASE 3
+
+#define RANK_B0_BASE 6
/**
* struct ecc_error_info - ECC error log information
@@ -106,6 +265,8 @@
* @bank: Bank number
* @bitpos: Bit position
* @data: Data causing the error
+ * @bankgrpnr: Bank group number
+ * @blknr: Block number
*/
struct ecc_error_info {
u32 row;
@@ -113,6 +274,8 @@ struct ecc_error_info {
u32 bank;
u32 bitpos;
u32 data;
+ u32 bankgrpnr;
+ u32 blknr;
};
/**
@@ -131,12 +294,18 @@ struct synps_ecc_status {
/**
* struct synps_edac_priv - DDR memory controller private instance data
- * @baseaddr: Base address of the DDR controller
- * @message: Buffer for framing the event specific info
- * @stat: ECC status information
- * @p_data: Pointer to platform data
- * @ce_cnt: Correctable Error count
- * @ue_cnt: Uncorrectable Error count
+ * @baseaddr: Base address of the DDR controller
+ * @message: Buffer for framing the event specific info
+ * @stat: ECC status information
+ * @p_data: Pointer to platform data
+ * @ce_cnt: Correctable Error count
+ * @ue_cnt: Uncorrectable Error count
+ * @poison_addr: Data poison address
+ * @row_shift: Value of row shifts
+ * @col_shift: Value of col shifts
+ * @bank_shift: Value of bank shifts
+ * @bankgrp_shift: Value of bank group shifts
+ * @rank_shift: Value of rank shifts
*/
struct synps_edac_priv {
void __iomem *baseaddr;
@@ -145,6 +314,12 @@ struct synps_edac_priv {
const struct synps_platform_data *p_data;
u32 ce_cnt;
u32 ue_cnt;
+ ulong poison_addr;
+ u32 row_shift[18];
+ u32 col_shift[14];
+ u32 bank_shift[3];
+ u32 bankgrp_shift[2];
+ u32 rank_shift[1];
};
/**
@@ -171,7 +346,7 @@ struct synps_platform_data {
*
* Determines there is any ecc error or not
*
- * Return: one if there is no error otherwise returns zero
+ * Return: 1 if there is no error otherwise returns 0
*/
static int synps_edac_geterror_info(void __iomem *base,
struct synps_ecc_status *p)
@@ -219,6 +394,65 @@ static int synps_edac_geterror_info(void __iomem *base,
}
/**
+ * synps_enh_edac_geterror_info - Get the current ecc error info
+ * @base: Pointer to the base address of the ddr memory controller
+ * @p: Pointer to the synopsys ecc status structure
+ *
+ * Determines there is any ecc error or not
+ *
+ * Return: one if there is no error otherwise returns zero
+ */
+static int synps_enh_edac_geterror_info(void __iomem *base,
+ struct synps_ecc_status *p)
+{
+ u32 regval, clearval = 0;
+
+ regval = readl(base + ECC_STAT_OFST);
+ if (!regval)
+ return 1;
+
+ p->ce_cnt = (regval & ECC_STAT_CECNT_MASK) >> ECC_STAT_CECNT_SHIFT;
+ p->ue_cnt = (regval & ECC_STAT_UECNT_MASK) >> ECC_STAT_UECNT_SHIFT;
+ p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
+
+ regval = readl(base + ECC_CEADDR0_OFST);
+ if (!(p->ce_cnt))
+ goto ue_err;
+
+ p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK);
+ regval = readl(base + ECC_CEADDR1_OFST);
+ p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
+ ECC_CEADDR1_BNKNR_SHIFT;
+ p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
+ ECC_CEADDR1_BNKGRP_SHIFT;
+ p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+ p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
+ edac_dbg(3, "ce bit position: %d data: %d\n", p->ceinfo.bitpos,
+ p->ceinfo.data);
+
+ue_err:
+ regval = readl(base + ECC_UEADDR0_OFST);
+ if (!(p->ue_cnt))
+ goto out;
+
+ p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK);
+ regval = readl(base + ECC_UEADDR1_OFST);
+ p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
+ ECC_CEADDR1_BNKGRP_SHIFT;
+ p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
+ ECC_CEADDR1_BNKNR_SHIFT;
+ p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
+ p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
+out:
+ clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT;
+ clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT;
+ writel(clearval, base + ECC_CLR_OFST);
+ writel(0x0, base + ECC_CLR_OFST);
+
+ return 0;
+}
+
+/**
* synps_edac_handle_error - Handle controller error types CE and UE
* @mci: Pointer to the edac memory controller instance
* @p: Pointer to the synopsys ecc status structure
@@ -233,9 +467,17 @@ static void synps_edac_handle_error(struct mem_ctl_info *mci,
if (p->ce_cnt) {
pinf = &p->ceinfo;
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type :%s Row %d Bank %d Col %d ",
- "CE", pinf->row, pinf->bank, pinf->col);
+ if (priv->p_data->quirks == 0)
+ snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d ",
+ "CE", pinf->row, pinf->bank, pinf->col);
+ else
+ snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d "
+ "BankGroup Number %d Block Number %d",
+ "CE", pinf->row, pinf->bank, pinf->col,
+ pinf->bankgrpnr, pinf->blknr);
+
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
p->ce_cnt, 0, 0, 0, 0, 0, -1,
priv->message, "");
@@ -243,9 +485,17 @@ static void synps_edac_handle_error(struct mem_ctl_info *mci,
if (p->ue_cnt) {
pinf = &p->ueinfo;
- snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
- "DDR ECC error type :%s Row %d Bank %d Col %d ",
- "UE", pinf->row, pinf->bank, pinf->col);
+ if (priv->p_data->quirks == 0)
+ snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d ",
+ "UE", pinf->row, pinf->bank, pinf->col);
+ else
+ snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d "
+ "BankGroup Number %d Block Number %d",
+ "UE", pinf->row, pinf->bank, pinf->col,
+ pinf->bankgrpnr, pinf->blknr);
+
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
p->ue_cnt, 0, 0, 0, 0, 0, -1,
priv->message, "");
@@ -255,6 +505,41 @@ static void synps_edac_handle_error(struct mem_ctl_info *mci,
}
/**
+ * synps_edac_intr_handler - synps edac isr
+ * @irq: irq number
+ * @dev_id: device id poniter
+ *
+ * This is the Isr routine called by edac core interrupt thread.
+ * Used to check and post ECC errors.
+ *
+ * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise
+ */
+static irqreturn_t synps_edac_intr_handler(int irq, void *dev_id)
+{
+ struct mem_ctl_info *mci = dev_id;
+ struct synps_edac_priv *priv = mci->pvt_info;
+ int status, regval;
+
+ regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST) &
+ (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
+ if (!(regval & ECC_CE_UE_INTR_MASK))
+ return IRQ_NONE;
+ status = priv->p_data->synps_edac_geterror_info(priv->baseaddr,
+ &priv->stat);
+ if (status)
+ return IRQ_NONE;
+
+ priv->ce_cnt += priv->stat.ce_cnt;
+ priv->ue_cnt += priv->stat.ue_cnt;
+ synps_edac_handle_error(mci, &priv->stat);
+
+ edac_dbg(3, "Total error count ce %d ue %d\n",
+ priv->ce_cnt, priv->ue_cnt);
+ writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+ return IRQ_HANDLED;
+}
+
+/**
* synps_edac_check - Check controller for ECC errors
* @mci: Pointer to the edac memory controller instance
*
@@ -310,6 +595,40 @@ static enum dev_type synps_edac_get_dtype(const void __iomem *base)
}
/**
+ * synps_enh_edac_get_dtype - Return the controller memory width
+ * @base: Pointer to the ddr memory controller base address
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type synps_enh_edac_get_dtype(const void __iomem *base)
+{
+ enum dev_type dt;
+ u32 width;
+
+ width = readl(base + CTRL_OFST);
+ width = (width & ECC_CTRL_BUSWIDTH_MASK) >>
+ ECC_CTRL_BUSWIDTH_SHIFT;
+ switch (width) {
+ case DDRCTL_EWDTH_16:
+ dt = DEV_X2;
+ break;
+ case DDRCTL_EWDTH_32:
+ dt = DEV_X4;
+ break;
+ case DDRCTL_EWDTH_64:
+ dt = DEV_X8;
+ break;
+ default:
+ dt = DEV_UNKNOWN;
+ }
+
+ return dt;
+}
+
+/**
* synps_edac_get_eccstate - Return the controller ecc enable/disable status
* @base: Pointer to the ddr memory controller base address
*
@@ -335,6 +654,32 @@ static bool synps_edac_get_eccstate(void __iomem *base)
}
/**
+ * synps_enh_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base: Pointer to the ddr memory controller base address
+ *
+ * Get the ECC enable/disable status for the controller
+ *
+ * Return: a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool synps_enh_edac_get_eccstate(void __iomem *base)
+{
+ enum dev_type dt;
+ u32 ecctype;
+ bool state = false;
+
+ dt = synps_enh_edac_get_dtype(base);
+ if (dt == DEV_UNKNOWN)
+ return state;
+
+ ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK;
+ if ((ecctype == SCRUB_MODE_SECDED) &&
+ ((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8)))
+ state = true;
+
+ return state;
+}
+
+/**
* synps_edac_get_memsize - reads the size of the attached memory device
*
* Return: the memory size in bytes
@@ -373,6 +718,35 @@ static enum mem_type synps_edac_get_mtype(const void __iomem *base)
}
/**
+ * synps_enh_edac_get_mtype - Returns controller memory type
+ * @base: pointer to the synopsys ecc status structure
+ *
+ * Get the EDAC memory type appropriate for the current controller
+ * configuration.
+ *
+ * Return: a memory type enumeration.
+ */
+static enum mem_type synps_enh_edac_get_mtype(const void __iomem *base)
+{
+ enum mem_type mt;
+ u32 memtype;
+
+ memtype = readl(base + CTRL_OFST);
+
+ mt = MEM_UNKNOWN;
+ if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
+ mt = MEM_DDR3;
+ else if (memtype & MEM_TYPE_DDR2)
+ mt = MEM_RDDR2;
+ else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4))
+ mt = MEM_DDR4;
+ else
+ mt = MEM_EMPTY;
+
+ return mt;
+}
+
+/**
* synps_edac_init_csrows - Initialize the cs row data
* @mci: Pointer to the edac memory controller instance
*
@@ -440,8 +814,13 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
mci->dev_name = SYNPS_EDAC_MOD_STRING;
mci->mod_name = SYNPS_EDAC_MOD_VER;
- edac_op_state = EDAC_OPSTATE_POLL;
- mci->edac_check = synps_edac_check;
+ if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
+ edac_op_state = EDAC_OPSTATE_INT;
+ } else {
+ edac_op_state = EDAC_OPSTATE_POLL;
+ mci->edac_check = synps_edac_check;
+ }
+
mci->ctl_page_to_phys = NULL;
status = synps_edac_init_csrows(mci);
@@ -457,13 +836,409 @@ static const struct synps_platform_data zynq_edac_def = {
.quirks = 0,
};
+static const struct synps_platform_data zynqmp_enh_edac_def = {
+ .synps_edac_geterror_info = synps_enh_edac_geterror_info,
+ .synps_edac_get_mtype = synps_enh_edac_get_mtype,
+ .synps_edac_get_dtype = synps_enh_edac_get_dtype,
+ .synps_edac_get_eccstate = synps_enh_edac_get_eccstate,
+ .quirks = (DDR_ECC_INTR_SUPPORT |
+ DDR_ECC_DATA_POISON_SUPPORT),
+};
+
static const struct of_device_id synps_edac_match[] = {
{ .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
+ { .compatible = "xlnx,zynqmp-ddrc-2.40a",
+ .data = (void *)&zynqmp_enh_edac_def},
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, synps_edac_match);
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/**
+ * ddr_poison_setup - update poison registers
+ * @priv: Pointer to synps_edac_priv struct
+ *
+ * Update poison registers as per ddr mapping
+ * Return: none.
+ */
+static void ddr_poison_setup(struct synps_edac_priv *priv)
+{
+ int col = 0, row = 0, bank = 0, bankgrp = 0, rank = 0, regval;
+ int index;
+ ulong hif_addr = 0;
+
+ hif_addr = priv->poison_addr >> 3;
+
+ for (index = 0; index < DDR_MAX_ROW_SHIFT; index++) {
+ if (priv->row_shift[index])
+ row |= (((hif_addr >> priv->row_shift[index]) &
+ BIT(0)) << index);
+ else
+ break;
+ }
+
+ for (index = 0; index < DDR_MAX_COL_SHIFT; index++) {
+ if (priv->col_shift[index] || index < 3)
+ col |= (((hif_addr >> priv->col_shift[index]) &
+ BIT(0)) << index);
+ else
+ break;
+ }
+
+ for (index = 0; index < DDR_MAX_BANK_SHIFT; index++) {
+ if (priv->bank_shift[index])
+ bank |= (((hif_addr >> priv->bank_shift[index]) &
+ BIT(0)) << index);
+ else
+ break;
+ }
+
+ for (index = 0; index < DDR_MAX_BANKGRP_SHIFT; index++) {
+ if (priv->bankgrp_shift[index])
+ bankgrp |= (((hif_addr >> priv->bankgrp_shift[index])
+ & BIT(0)) << index);
+ else
+ break;
+ }
+
+ if (priv->rank_shift[0])
+ rank = (hif_addr >> priv->rank_shift[0]) & BIT(0);
+
+ regval = (rank << ECC_POISON0_RANK_SHIFT) | col;
+ writel(regval, priv->baseaddr + ECC_POISON0_OFST);
+ regval = (bankgrp << ECC_POISON1_BANKGRP_SHIFT) |
+ (bank << ECC_POISON1_BANKNR_SHIFT) | row;
+ writel(regval, priv->baseaddr + ECC_POISON1_OFST);
+}
+
+/**
+ * inject_data_error_show - Get Poison0 & 1 register contents
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ *
+ * Get the Poison0 and Poison1 register contents
+ * Return: Number of bytes copied.
+ */
+static ssize_t inject_data_error_show(struct device *dev,
+ struct device_attribute *mattr,
+ char *data)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r"
+ "Error injection Address: 0x%lx\n\r",
+ readl(priv->baseaddr + ECC_POISON0_OFST),
+ readl(priv->baseaddr + ECC_POISON1_OFST),
+ priv->poison_addr);
+}
+
+/**
+ * inject_data_error_store - Configure Poison0 Poison1 registers
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ * @count: read the size bytes from buffer
+ *
+ * Configures the Poison0 and Poison1 register contents as per user given
+ * address
+ * Return: Number of bytes copied.
+ */
+static ssize_t inject_data_error_store(struct device *dev,
+ struct device_attribute *mattr,
+ const char *data, size_t count)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ if (kstrtoul(data, 0, &priv->poison_addr))
+ return -EINVAL;
+
+ ddr_poison_setup(priv);
+
+ return count;
+}
+
+/**
+ * inject_data_poison_show - Shows type of Data poison
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ *
+ * Shows the type of Error injection enabled, either UE or CE
+ * Return: Number of bytes copied.
+ */
+static ssize_t inject_data_poison_show(struct device *dev,
+ struct device_attribute *mattr,
+ char *data)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ return sprintf(data, "Data Poisoning: %s\n\r",
+ (((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) == 0x3)
+ ? ("Correctable Error") : ("UnCorrectable Error"));
+}
+
+/**
+ * inject_data_poison_store - Enbles Data poison CE/UE
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ * @count: read the size bytes from buffer
+ *
+ * Enables the CE or UE Data poison
+ * Return: Number of bytes copied.
+ */
+static ssize_t inject_data_poison_store(struct device *dev,
+ struct device_attribute *mattr,
+ const char *data, size_t count)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ writel(0, priv->baseaddr + DDRC_SWCTL);
+ if (strncmp(data, "CE", 2) == 0)
+ writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
+ else
+ writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
+ writel(1, priv->baseaddr + DDRC_SWCTL);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(inject_data_error);
+static DEVICE_ATTR_RW(inject_data_poison);
+
+/**
+ * synps_edac_create_sysfs_attributes - Create sysfs entries
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Create sysfs attributes for injecting ECC errors using data poison.
+ *
+ * Return: 0 if sysfs creation was successful, else return negative error code.
+ */
+static int synps_edac_create_sysfs_attributes(struct mem_ctl_info *mci)
+{
+ int rc;
+
+ rc = device_create_file(&mci->dev, &dev_attr_inject_data_error);
+ if (rc < 0)
+ return rc;
+ rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison);
+ if (rc < 0)
+ return rc;
+ return 0;
+}
+
+/**
+ * synps_edac_remove_sysfs_attributes - Removes sysfs entries
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Removes sysfs attributes.
+ *
+ * Return: none.
+ */
+static void synps_edac_remove_sysfs_attributes(struct mem_ctl_info *mci)
+{
+ device_remove_file(&mci->dev, &dev_attr_inject_data_error);
+ device_remove_file(&mci->dev, &dev_attr_inject_data_poison);
+}
+
+/**
+ * setup_address_map - Set Address Map by querying ADDRMAP registers
+ * @priv: Pointer to synps_edac_priv struct
+ *
+ * Set Address Map by querying ADDRMAP registers
+ * Return: none.
+ */
+static void setup_address_map(struct synps_edac_priv *priv)
+{
+ u32 addrmap[12], addrmap_row_b2_10;
+ int index;
+ u32 width, memtype;
+
+ memtype = readl(priv->baseaddr + CTRL_OFST);
+ width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
+
+ for (index = 0; index < 12; index++) {
+ u32 addrmap_offset;
+
+ addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4);
+ addrmap[index] = readl(priv->baseaddr + addrmap_offset);
+ }
+
+ priv->row_shift[0] = (addrmap[5] & ROW_MAX_VAL_MASK) + ROW_B0_BASE;
+ priv->row_shift[1] = ((addrmap[5] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B1_BASE;
+
+ addrmap_row_b2_10 = (addrmap[5] >> 16) & ROW_MAX_VAL_MASK;
+ if (addrmap_row_b2_10 != ROW_MAX_VAL_MASK) {
+ for (index = 2; index < 11; index++)
+ priv->row_shift[index] = addrmap_row_b2_10 +
+ index + ROW_B0_BASE;
+
+ } else {
+ priv->row_shift[2] = (addrmap[9] &
+ ROW_MAX_VAL_MASK) + ROW_B2_BASE;
+ priv->row_shift[3] = ((addrmap[9] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B3_BASE;
+ priv->row_shift[4] = ((addrmap[9] >> 16) &
+ ROW_MAX_VAL_MASK) + ROW_B4_BASE;
+ priv->row_shift[5] = ((addrmap[9] >> 24) &
+ ROW_MAX_VAL_MASK) + ROW_B5_BASE;
+ priv->row_shift[6] = (addrmap[10] &
+ ROW_MAX_VAL_MASK) + ROW_B6_BASE;
+ priv->row_shift[7] = ((addrmap[10] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B7_BASE;
+ priv->row_shift[8] = ((addrmap[10] >> 16) &
+ ROW_MAX_VAL_MASK) + ROW_B8_BASE;
+ priv->row_shift[9] = ((addrmap[10] >> 24) &
+ ROW_MAX_VAL_MASK) + ROW_B9_BASE;
+ priv->row_shift[10] = (addrmap[11] &
+ ROW_MAX_VAL_MASK) + ROW_B10_BASE;
+ }
+
+ priv->row_shift[11] = (((addrmap[5] >> 24) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[5] >> 24) &
+ ROW_MAX_VAL_MASK) + ROW_B11_BASE);
+ priv->row_shift[12] = ((addrmap[6] & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : ((addrmap[6] &
+ ROW_MAX_VAL_MASK) + ROW_B12_BASE);
+ priv->row_shift[13] = (((addrmap[6] >> 8) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B13_BASE);
+ priv->row_shift[14] = (((addrmap[6] >> 16) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 16) &
+ ROW_MAX_VAL_MASK) + ROW_B14_BASE);
+ priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) &
+ ROW_MAX_VAL_MASK) + ROW_B15_BASE);
+ priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] &
+ ROW_MAX_VAL_MASK) + ROW_B16_BASE);
+ priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) ==
+ ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) &
+ ROW_MAX_VAL_MASK) + ROW_B17_BASE);
+
+ priv->col_shift[0] = 0;
+ priv->col_shift[1] = 1;
+ priv->col_shift[2] = (addrmap[2] & COL_MAX_VAL_MASK) + COL_B2_BASE;
+ priv->col_shift[3] = ((addrmap[2] >> 8) &
+ COL_MAX_VAL_MASK) + COL_B3_BASE;
+ priv->col_shift[4] = (((addrmap[2] >> 16) & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 16) &
+ COL_MAX_VAL_MASK) + COL_B4_BASE);
+ priv->col_shift[5] = (((addrmap[2] >> 24) & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 24) &
+ COL_MAX_VAL_MASK) + COL_B5_BASE);
+ priv->col_shift[6] = ((addrmap[3] & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : ((addrmap[3] &
+ COL_MAX_VAL_MASK) + COL_B6_BASE);
+ priv->col_shift[7] = (((addrmap[3] >> 8) & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 8) &
+ COL_MAX_VAL_MASK) + COL_B7_BASE);
+ priv->col_shift[8] = (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 16) &
+ COL_MAX_VAL_MASK) + COL_B8_BASE);
+ priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) ==
+ COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) &
+ COL_MAX_VAL_MASK) + COL_B9_BASE);
+ if (width == DDRCTL_EWDTH_64) {
+ if (memtype & MEM_TYPE_LPDDR3) {
+ priv->col_shift[10] = ((addrmap[4] &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ ((addrmap[4] & COL_MAX_VAL_MASK) +
+ COL_B10_BASE);
+ priv->col_shift[11] = (((addrmap[4] >> 8) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
+ COL_B11_BASE);
+ } else {
+ priv->col_shift[11] = ((addrmap[4] &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ ((addrmap[4] & COL_MAX_VAL_MASK) +
+ COL_B10_BASE);
+ priv->col_shift[13] = (((addrmap[4] >> 8) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
+ COL_B11_BASE);
+ }
+ } else if (width == DDRCTL_EWDTH_32) {
+ if (memtype & MEM_TYPE_LPDDR3) {
+ priv->col_shift[10] = (((addrmap[3] >> 24) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
+ COL_B9_BASE);
+ priv->col_shift[11] = ((addrmap[4] &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ ((addrmap[4] & COL_MAX_VAL_MASK) +
+ COL_B10_BASE);
+ } else {
+ priv->col_shift[11] = (((addrmap[3] >> 24) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
+ COL_B9_BASE);
+ priv->col_shift[13] = ((addrmap[4] &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ ((addrmap[4] & COL_MAX_VAL_MASK) +
+ COL_B10_BASE);
+ }
+ } else {
+ if (memtype & MEM_TYPE_LPDDR3) {
+ priv->col_shift[10] = (((addrmap[3] >> 16) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
+ COL_B8_BASE);
+ priv->col_shift[11] = (((addrmap[3] >> 24) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
+ COL_B9_BASE);
+ priv->col_shift[13] = ((addrmap[4] &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ ((addrmap[4] & COL_MAX_VAL_MASK) +
+ COL_B10_BASE);
+ } else {
+ priv->col_shift[11] = (((addrmap[3] >> 16) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
+ COL_B8_BASE);
+ priv->col_shift[13] = (((addrmap[3] >> 24) &
+ COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
+ (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
+ COL_B9_BASE);
+ }
+ }
+
+ if (width) {
+ for (index = 9; index > width; index--) {
+ priv->col_shift[index] = priv->col_shift[index - width];
+ priv->col_shift[index - width] = 0;
+ }
+ }
+
+ priv->bank_shift[0] = (addrmap[1] & BANK_MAX_VAL_MASK) + BANK_B0_BASE;
+ priv->bank_shift[1] = ((addrmap[1] >> 8) &
+ BANK_MAX_VAL_MASK) + BANK_B1_BASE;
+ priv->bank_shift[2] = (((addrmap[1] >> 16) &
+ BANK_MAX_VAL_MASK) == BANK_MAX_VAL_MASK) ? 0 :
+ (((addrmap[1] >> 16) & BANK_MAX_VAL_MASK) +
+ BANK_B2_BASE);
+
+ priv->bankgrp_shift[0] = (addrmap[8] &
+ BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE;
+ priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) ==
+ BANKGRP_MAX_VAL_MASK) ? 0 : (((addrmap[8] >> 8)
+ & BANKGRP_MAX_VAL_MASK) + BANKGRP_B1_BASE);
+
+ priv->rank_shift[0] = ((addrmap[0] & RANK_MAX_VAL_MASK) ==
+ RANK_MAX_VAL_MASK) ? 0 : ((addrmap[0] &
+ RANK_MAX_VAL_MASK) + RANK_B0_BASE);
+}
+
/**
* synps_edac_mc_probe - Check controller and bind driver
* @pdev: Pointer to the platform_device struct
@@ -478,7 +1253,7 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
struct mem_ctl_info *mci;
struct edac_mc_layer layers[2];
struct synps_edac_priv *priv;
- int rc;
+ int rc, irq, status;
struct resource *res;
void __iomem *baseaddr;
const struct of_device_id *match;
@@ -527,6 +1302,27 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
goto free_edac_mc;
}
+ if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "No irq %d in DT\n", irq);
+ return -ENODEV;
+ }
+
+ status = devm_request_irq(&pdev->dev, irq,
+ synps_edac_intr_handler,
+ 0, dev_name(&pdev->dev), mci);
+ if (status < 0) {
+ edac_printk(KERN_ERR, EDAC_MC, "Failed to request Irq\n");
+ goto free_edac_mc;
+ }
+
+ /* Enable UE/CE Interrupts */
+ writel((DDR_QOSUE_MASK | DDR_QOSCE_MASK),
+ priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+ }
+
rc = edac_mc_add_mc(mci);
if (rc) {
edac_printk(KERN_ERR, EDAC_MC,
@@ -534,6 +1330,18 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
goto free_edac_mc;
}
+ if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) {
+ if (synps_edac_create_sysfs_attributes(mci)) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to create sysfs entries\n");
+ goto free_edac_mc;
+ }
+ }
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "xlnx,zynqmp-ddrc-2.40a"))
+ setup_address_map(priv);
+
/*
* Start capturing the correctable and uncorrectable errors. A write of
* 0 starts the counters.
@@ -557,8 +1365,16 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
static int synps_edac_mc_remove(struct platform_device *pdev)
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+ struct synps_edac_priv *priv;
+ priv = mci->pvt_info;
+ if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
+ /* Disable UE/CE Interrupts */
+ writel((DDR_QOSUE_MASK | DDR_QOSCE_MASK),
+ priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
edac_mc_del_mc(&pdev->dev);
+ if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT)
+ synps_edac_remove_sysfs_attributes(mci);
edac_mc_free(mci);
return 0;
--
2.1.1
^ permalink raw reply related [flat|nested] 7+ messages in thread