From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Chris Paterson <chris.paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Biju Das <biju.das@bp.renesas.com>
Subject: [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
Date: Fri, 20 Jul 2018 14:07:02 +0100 [thread overview]
Message-ID: <1532092022-64918-1-git-send-email-biju.das@bp.renesas.com> (raw)
Replace the hardcoded power domain indices by R8A77470_PD_* symbols.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
---
Commit 964f7c0dd23de68c0 ("soc: renesas: rcar-sysc: Add r8a77470 support")
is in Linus' tree
---
arch/arm/boot/dts/r8a77470.dtsi | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 87d32d3..9b218c3 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
/ {
compatible = "renesas,r8a77470";
#address-cells = <2>;
@@ -23,7 +24,7 @@
reg = <0>;
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
@@ -32,7 +33,7 @@
compatible = "cache";
cache-unified;
cache-level = <2>;
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77470_PD_CA7_SCU>;
};
};
@@ -97,7 +98,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
@@ -151,7 +152,7 @@
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
@@ -184,7 +185,7 @@
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
@@ -196,7 +197,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
@@ -214,7 +215,7 @@
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
@@ -230,7 +231,7 @@
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
@@ -246,7 +247,7 @@
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 719>;
status = "disabled";
};
@@ -262,7 +263,7 @@
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 718>;
status = "disabled";
};
@@ -278,7 +279,7 @@
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 715>;
status = "disabled";
};
@@ -294,7 +295,7 @@
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 714>;
status = "disabled";
};
@@ -309,7 +310,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
--
2.7.4
next reply other threads:[~2018-07-20 13:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 13:07 Biju Das [this message]
2018-07-23 15:53 ` [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions Simon Horman
2018-07-24 6:54 ` Geert Uytterhoeven
2018-07-24 11:27 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532092022-64918-1-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=chris.paterson2@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).