From: thor.thayer@linux.intel.com
To: joro@8bytes.org, robh+dt@kernel.org, mark.rutland@arm.com,
dinguyen@kernel.org, will.deacon@arm.com, robin.murphy@arm.com
Cc: iommu@lists.linux-foundation.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Thor Thayer <thor.thayer@linux.intel.com>
Subject: [PATCH 1/2] arm64: dts: stratix10: Add Stratix10 SMMU support
Date: Wed, 25 Jul 2018 13:24:36 -0500 [thread overview]
Message-ID: <1532543077-8933-2-git-send-email-thor.thayer@linux.intel.com> (raw)
In-Reply-To: <1532543077-8933-1-git-send-email-thor.thayer@linux.intel.com>
From: Thor Thayer <thor.thayer@linux.intel.com>
Add SMMU support to the Stratix10 Device Tree which
includes adding the SMMU node and adding IOMMU stream
ids to the SMMU peripherals. Update bindings.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
This patch is dependent on the patch series
"iommu/arm-smmu: Add runtime pm/sleep support"
(https://patchwork.ozlabs.org/cover/946160/)
---
.../devicetree/bindings/iommu/arm,smmu.txt | 25 ++++++++++++++++++
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 30 ++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 7c71a6ed465a..8e3fe0594e3e 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -18,6 +18,7 @@ conditions.
"arm,mmu-500"
"cavium,smmu-v2"
"qcom,<soc>-smmu-v2", "qcom,smmu-v2"
+ "altr,smmu-v2"
depending on the particular implementation and/or the
version of the architecture implemented.
@@ -179,3 +180,27 @@ conditions.
<&mmcc SMMU_MDP_AHB_CLK>;
clock-names = "bus", "iface";
};
+
+ /* Stratix10 arm,smmu-v2 implementation */
+ smmu5: iommu@fa000000 {
+ compatible = "altr,smmu-v2", "arm,mmu-500",
+ "arm,smmu-v2";
+ reg = <0xfa000000 0x40000>;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+ clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+ clock-names = "masters";
+ interrupt-parent = <&intc>;
+ interrupts = <0 128 4>, /* Global Secure Fault */
+ <0 129 4>, /* Global Non-secure Fault */
+ /* Non-secure Context Interrupts (32) */
+ <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+ <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+ <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+ stream-match-mask = <0x7ff0>;
+ };
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index d033da401c26..e38ca86d48f6 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -137,6 +137,7 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
clock-names = "stmmaceth";
+ iommus = <&smmu 1>;
status = "disabled";
};
@@ -150,6 +151,7 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
clock-names = "stmmaceth";
+ iommus = <&smmu 2>;
status = "disabled";
};
@@ -163,6 +165,7 @@
reset-names = "stmmaceth", "stmmaceth-ocp";
clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
clock-names = "stmmaceth";
+ iommus = <&smmu 3>;
status = "disabled";
};
@@ -273,6 +276,7 @@
clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
<&clkmgr STRATIX10_SDMMC_CLK>;
clock-names = "biu", "ciu";
+ iommus = <&smmu 5>;
status = "disabled";
};
@@ -307,6 +311,30 @@
altr,modrst-offset = <0x20>;
};
+ smmu: iommu@fa000000 {
+ compatible = "altr,smmu-v2", "arm,mmu-500",
+ "arm,smmu-v2";
+ reg = <0xfa000000 0x40000>;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+ clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+ clock-names = "masters";
+ interrupt-parent = <&intc>;
+ interrupts = <0 128 4>, /* Global Secure Fault */
+ <0 129 4>, /* Global Non-secure Fault */
+ /* Non-secure Context Interrupts (32) */
+ <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+ <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+ <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+ stream-match-mask = <0x7ff0>;
+ status = "disabled";
+ };
+
spi0: spi@ffda4000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
@@ -416,6 +444,7 @@
resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
reset-names = "dwc2", "dwc2-ecc";
clocks = <&clkmgr STRATIX10_USB_CLK>;
+ iommus = <&smmu 6>;
status = "disabled";
};
@@ -428,6 +457,7 @@
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
reset-names = "dwc2", "dwc2-ecc";
clocks = <&clkmgr STRATIX10_USB_CLK>;
+ iommus = <&smmu 7>;
status = "disabled";
};
--
2.7.4
next prev parent reply other threads:[~2018-07-25 18:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-25 18:24 [PATCH 0/2] iommu/arm-smmu: Add Stratix10 SMMU Support thor.thayer
2018-07-25 18:24 ` thor.thayer [this message]
2018-08-07 18:00 ` [PATCH 1/2] arm64: dts: stratix10: Add Stratix10 SMMU support Rob Herring
2018-08-08 17:38 ` Robin Murphy
[not found] ` <db4d8290-c015-aa8b-6058-11fd3d25464b-5wv7dgnIgG8@public.gmane.org>
2018-08-17 3:33 ` Thor Thayer
2018-07-25 18:24 ` [PATCH 2/2] iommu/arm-smmu: Add support for Stratix10 smmu-v2 variant thor.thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532543077-8933-2-git-send-email-thor.thayer@linux.intel.com \
--to=thor.thayer@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).