From: Rohit kumar <rohitkr@codeaurora.org>
To: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, plai@codeaurora.org,
bgoswami@codeaurora.org, perex@perex.cz,
srinivas.kandagatla@linaro.org, tiwai@suse.com,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Rohit kumar <rohitkr@codeaurora.org>
Subject: [PATCH v4 1/4] ASoC: qcom: dt-bindings: Add sdm845 machine bindings
Date: Mon, 30 Jul 2018 15:40:51 +0530 [thread overview]
Message-ID: <1532945454-10437-2-git-send-email-rohitkr@codeaurora.org> (raw)
In-Reply-To: <1532945454-10437-1-git-send-email-rohitkr@codeaurora.org>
Add devicetree bindings documentation file for SDM845 sound card.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
.../devicetree/bindings/sound/qcom,sdm845.txt | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,sdm845.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
new file mode 100644
index 0000000..408c483
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
@@ -0,0 +1,80 @@
+* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
+
+This binding describes the SDM845 sound card, which uses qdsp for audio.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,sdm845-sndcard"
+
+- audio-routing:
+ Usage: Optional
+ Value type: <stringlist>
+ Definition: A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names could be power supplies, MicBias
+ of codec and the jacks on the board.
+
+- model:
+ Usage: required
+ Value type: <stringlist>
+ Definition: The user-visible name of this sound card.
+
+= dailinks
+Each subnode of sndcard represents either a dailink, and subnodes of each
+dailinks would be cpu/codec/platform dais.
+
+- link-name:
+ Usage: required
+ Value type: <string>
+ Definition: User friendly name for dai link
+
+= CPU, PLATFORM, CODEC dais subnodes
+- cpu:
+ Usage: required
+ Value type: <subnode>
+ Definition: cpu dai sub-node
+
+- codec:
+ Usage: required
+ Value type: <subnode>
+ Definition: codec dai sub-node
+
+- platform:
+ Usage: Optional
+ Value type: <subnode>
+ Definition: platform dai sub-node
+
+- sound-dai:
+ Usage: required
+ Value type: <phandle>
+ Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
+
+Example:
+
+audio {
+ compatible = "qcom,sdm845-sndcard";
+ model = "sdm845-snd-card";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
+ pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ pri-mi2s-dai-link {
+ link-name = "PRI MI2S Playback";
+ cpu {
+ sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ };
+};
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-07-30 10:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-30 10:10 [PATCH v4 0/4] Add support for audio on SDM845 SoC Rohit kumar
2018-07-30 10:10 ` Rohit kumar [this message]
2018-07-30 21:51 ` [PATCH v4 1/4] ASoC: qcom: dt-bindings: Add sdm845 machine bindings Rob Herring
2018-07-30 10:10 ` [PATCH v4 2/4] ASoC: dt-bindings: Update dt binding name for apq8096 Rohit kumar
2018-07-30 21:52 ` Rob Herring
2018-07-30 10:10 ` [PATCH v4 3/4] ASoC: qcom: Add support to parse common audio device nodes Rohit kumar
2018-07-30 10:10 ` [PATCH v4 4/4] ASoC: qcom: add sdm845 sound card support Rohit kumar
2018-08-01 3:46 ` kbuild test robot
2018-08-01 4:50 ` Takashi Iwai
2018-08-01 6:32 ` Rohit Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532945454-10437-2-git-send-email-rohitkr@codeaurora.org \
--to=rohitkr@codeaurora.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).