From: Manish Narani <manish.narani@xilinx.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
michal.simek@xilinx.com, bp@alien8.de, mchehab@kernel.org,
mdf@kernel.org, edgar.iglesias@xilinx.com,
shubhrajyoti.datta@xilinx.com, naga.sureshkumar.relli@xilinx.com,
bharat.kumar.gogada@xilinx.com, stefan.krsmanovic@aggios.com
Cc: sgoud@xilinx.com, anirudh@xilinx.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org,
Manish Narani <manish.narani@xilinx.com>
Subject: [PATCH v2 1/4] edac: synps: Add platform specific structures for ddrc controller
Date: Thu, 2 Aug 2018 18:04:45 +0530 [thread overview]
Message-ID: <1533213288-8771-2-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1533213288-8771-1-git-send-email-manish.narani@xilinx.com>
This patch adds platform specific structures, so that we can add
different IP support later using quirks.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
drivers/edac/synopsys_edac.c | 64 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 11 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 0c9c59e..d4798e8 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -22,6 +22,7 @@
#include <linux/edac.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include "edac_module.h"
@@ -130,6 +131,7 @@ struct synps_ecc_status {
* @baseaddr: Base address of the DDR controller
* @message: Buffer for framing the event specific info
* @stat: ECC status information
+ * @p_data: Pointer to platform data
* @ce_cnt: Correctable Error count
* @ue_cnt: Uncorrectable Error count
*/
@@ -137,11 +139,29 @@ struct synps_edac_priv {
void __iomem *baseaddr;
char message[SYNPS_EDAC_MSG_SIZE];
struct synps_ecc_status stat;
+ const struct synps_platform_data *p_data;
u32 ce_cnt;
u32 ue_cnt;
};
/**
+ * struct synps_platform_data - synps platform data structure
+ * @synps_edac_geterror_info: function pointer to synps edac error info
+ * @synps_edac_get_mtype: function pointer to synps edac mtype
+ * @synps_edac_get_dtype: function pointer to synps edac dtype
+ * @synps_edac_get_eccstate: function pointer to synps edac eccstate
+ * @quirks: to differentiate IPs
+ */
+struct synps_platform_data {
+ int (*synps_edac_geterror_info)(void __iomem *base,
+ struct synps_ecc_status *p);
+ enum mem_type (*synps_edac_get_mtype)(const void __iomem *base);
+ enum dev_type (*synps_edac_get_dtype)(const void __iomem *base);
+ bool (*synps_edac_get_eccstate)(void __iomem *base);
+ int quirks;
+};
+
+/**
* synps_edac_geterror_info - Get the current ecc error info
* @base: Pointer to the base address of the ddr memory controller
* @p: Pointer to the synopsys ecc status structure
@@ -242,7 +262,8 @@ static void synps_edac_check(struct mem_ctl_info *mci)
struct synps_edac_priv *priv = mci->pvt_info;
int status;
- status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
+ status = priv->p_data->synps_edac_geterror_info(priv->baseaddr,
+ &priv->stat);
if (status)
return;
@@ -372,10 +393,12 @@ static int synps_edac_init_csrows(struct mem_ctl_info *mci)
for (j = 0; j < csi->nr_channels; j++) {
dimm = csi->channels[j]->dimm;
dimm->edac_mode = EDAC_FLAG_SECDED;
- dimm->mtype = synps_edac_get_mtype(priv->baseaddr);
+ dimm->mtype = priv->p_data->synps_edac_get_mtype(
+ priv->baseaddr);
dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels;
dimm->grain = SYNPS_EDAC_ERR_GRAIN;
- dimm->dtype = synps_edac_get_dtype(priv->baseaddr);
+ dimm->dtype = priv->p_data->synps_edac_get_dtype(
+ priv->baseaddr);
}
}
@@ -423,6 +446,21 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
return status;
}
+static const struct synps_platform_data zynq_edac_def = {
+ .synps_edac_geterror_info = synps_edac_geterror_info,
+ .synps_edac_get_mtype = synps_edac_get_mtype,
+ .synps_edac_get_dtype = synps_edac_get_dtype,
+ .synps_edac_get_eccstate = synps_edac_get_eccstate,
+ .quirks = 0,
+};
+
+static const struct of_device_id synps_edac_match[] = {
+ { .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, synps_edac_match);
+
/**
* synps_edac_mc_probe - Check controller and bind driver
* @pdev: Pointer to the platform_device struct
@@ -440,13 +478,22 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
int rc;
struct resource *res;
void __iomem *baseaddr;
+ const struct of_device_id *match;
+ const struct synps_platform_data *p_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
baseaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(baseaddr))
return PTR_ERR(baseaddr);
- if (!synps_edac_get_eccstate(baseaddr)) {
+ match = of_match_node(synps_edac_match, pdev->dev.of_node);
+ if (!match && !match->data) {
+ dev_err(&pdev->dev, "of_match_node() failed\n");
+ return -EINVAL;
+ }
+
+ p_data = (struct synps_platform_data *)match->data;
+ if (!(p_data->synps_edac_get_eccstate(baseaddr))) {
edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
return -ENXIO;
}
@@ -468,6 +515,8 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
priv = mci->pvt_info;
priv->baseaddr = baseaddr;
+ priv->p_data = match->data;
+
rc = synps_edac_mc_init(mci, pdev);
if (rc) {
edac_printk(KERN_ERR, EDAC_MC,
@@ -511,13 +560,6 @@ static int synps_edac_mc_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id synps_edac_match[] = {
- { .compatible = "xlnx,zynq-ddrc-a05", },
- { /* end of table */ }
-};
-
-MODULE_DEVICE_TABLE(of, synps_edac_match);
-
static struct platform_driver synps_edac_mc_driver = {
.driver = {
.name = "synopsys-edac",
--
2.1.1
next prev parent reply other threads:[~2018-08-02 12:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-02 12:34 [PATCH v2 0/4] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
2018-08-02 12:34 ` Manish Narani [this message]
2018-08-02 12:34 ` [PATCH v2 2/4] dt: bindings: Document ZynqMP DDRC in Synopsys documentation Manish Narani
2018-08-02 12:34 ` [PATCH v2 3/4] edac: synopsys: Add EDAC ECC support for ZynqMP DDRC Manish Narani
2018-08-02 12:34 ` [PATCH v2 4/4] arm64: zynqmp: Add DDRC node Manish Narani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533213288-8771-2-git-send-email-manish.narani@xilinx.com \
--to=manish.narani@xilinx.com \
--cc=anirudh@xilinx.com \
--cc=bharat.kumar.gogada@xilinx.com \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=edgar.iglesias@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=naga.sureshkumar.relli@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sgoud@xilinx.com \
--cc=shubhrajyoti.datta@xilinx.com \
--cc=stefan.krsmanovic@aggios.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).