devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Philipp Zabel <p.zabel@pengutronix.de>
To: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	kernel@pengutronix.de, Mauro Carvalho Chehab <mchehab@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] media: imx-pxp: add i.MX Pixel Pipeline driver
Date: Fri, 10 Aug 2018 17:20:35 +0200	[thread overview]
Message-ID: <1533914435.15515.8.camel@pengutronix.de> (raw)
In-Reply-To: <20180810151822.18650-4-p.zabel@pengutronix.de>

On Fri, 2018-08-10 at 17:18 +0200, Philipp Zabel wrote:
> Add a V4L2 mem-to-mem scaler/CSC driver for the Pixel Pipeline (PXP)
> version found on i.MX6ULL SoCs. A similar variant is used on i.MX7D.
> 
> Since this driver only uses the legacy pipeline, it should be reasonably
> easy to extend it to work with the older PXP versions found on i.MX6UL,
> i.MX6SX, i.MX6SL, i.MX28, and i.MX23.
> 
> The driver supports scaling and colorspace conversion. There is
> currently no support for rotation, alpha-blending, and the LUTs.
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

FWIW for mem2mem devices, here is the output of v4l2-compliance, built
from v4l-utils-1.14.0-249-g70b13df426d3:

----------8<----------
v4l2-compliance SHA: not available, 32 bits

Compliance test for device /dev/video0:

Driver Info:
	Driver name      : pxp
	Card type        : pxp
	Bus info         : platform:pxp
	Driver version   : 4.18.0
	Capabilities     : 0x84208000
		Video Memory-to-Memory
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04208000
		Video Memory-to-Memory
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 4 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK

Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
---------->8----------

regards
Philipp

  reply	other threads:[~2018-08-10 15:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10 15:18 [PATCH 0/3] i.MX PXP scaler/CSC driver Philipp Zabel
2018-08-10 15:18 ` [PATCH 1/3] dt-bindings: media: Add i.MX Pixel Pipeline binding Philipp Zabel
2018-08-14 20:52   ` Rob Herring
2018-08-10 15:18 ` [PATCH 2/3] ARM: dts: imx6ull: add pxp support Philipp Zabel
2018-08-27  6:59   ` Shawn Guo
2018-09-03 14:54     ` Philipp Zabel
2018-08-10 15:18 ` [PATCH 3/3] media: imx-pxp: add i.MX Pixel Pipeline driver Philipp Zabel
2018-08-10 15:20   ` Philipp Zabel [this message]
2018-09-03 12:55   ` Hans Verkuil
2018-09-03 14:52     ` Philipp Zabel
2018-09-04  8:04   ` jacopo mondi
2018-09-04  9:12     ` Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533914435.15515.8.camel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).