From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Wahren Subject: [PATCH V2 3/3] arm64: dts: broadcom: Add reference to Compute Module IO Board V3 Date: Mon, 27 Aug 2018 20:05:48 +0200 Message-ID: <1535393148-24163-4-git-send-email-stefan.wahren@i2se.com> References: <1535393148-24163-1-git-send-email-stefan.wahren@i2se.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1535393148-24163-1-git-send-email-stefan.wahren@i2se.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Florian Fainelli Cc: Mark Rutland , devicetree@vger.kernel.org, Arnd Bergmann , Scott Branden , Ray Jui , Stefan Wahren , Phil Elwell , Alexander Graf , Eric Anholt , Rob Herring , bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org This adds a reference to the dts of the Compute Module IO Board V3 in arm, so we don't need to maintain the content in arm64. Signed-off-by: Stefan Wahren --- arch/arm64/boot/dts/broadcom/Makefile | 3 ++- arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 1193a9e..3d98f5f 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb + bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dts subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 0000000..b1c4ab2 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-cm3-io3.dts" -- 2.7.4