From mboxrd@z Thu Jan 1 00:00:00 1970 From: lei liu Subject: Re: [SPAM][PATCH 2/3] spis: mediatek: add spi slave for Mediatek MT2712 Date: Mon, 3 Sep 2018 13:47:24 +0800 Message-ID: <1535953644.3043.31.camel@mhfsdcap03> References: <1535437685-30230-1-git-send-email-leilk.liu@mediatek.com> <1535437685-30230-3-git-send-email-leilk.liu@mediatek.com> <1535683285.28775.46.camel@mtkswgap22> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1535683285.28775.46.camel@mtkswgap22> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+glpam-linux-mediatek=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: Sean Wang Cc: Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Mark Brown , linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Matthias Brugger , mengqi.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, 2018-08-31 at 10:41 +0800, Sean Wang wrote: > Hi, > > a few comments are added inline > > On Tue, 2018-08-28 at 14:28 +0800, Leilk Liu wrote: > > This patchs add basic spi slave for MT2712. > > > > Signed-off-by: Leilk Liu > > --- > > drivers/spi/Kconfig | 8 + > > drivers/spi/Makefile | 1 + > > drivers/spi/spi-slave-mt27xx.c | 613 ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 622 insertions(+) > > create mode 100644 drivers/spi/spi-slave-mt27xx.c > > > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > > index 671d078..86ef6a5 100644 > > --- a/drivers/spi/Kconfig > > +++ b/drivers/spi/Kconfig > > @@ -802,6 +802,14 @@ config SPI_SLAVE > > slave protocol handlers. > > > > if SPI_SLAVE > > +config SPI_SLAVE_MT27XX > > + tristate "MediaTek SPI slave device" > > + depends on ARCH_MEDIATEK || COMPILE_TEST > > + help > > + This selects the MediaTek(R) SPI slave device driver. > > + If you want to use MediaTek(R) SPI slave interface, > > + say Y or M here.If you are not sure, say N. > > + SPI slave drivers for Mediatek MT27XX series ARM SoCs. > > > > config SPI_SLAVE_TIME > > tristate "SPI slave handler reporting boot up time" > > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile > > index a90d559..a5e7b3c 100644 > > --- a/drivers/spi/Makefile > > +++ b/drivers/spi/Makefile > > @@ -109,5 +109,6 @@ obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o > > obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o > > > > # SPI slave protocol handlers > > +obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o > > obj-$(CONFIG_SPI_SLAVE_TIME) += spi-slave-time.o > > obj-$(CONFIG_SPI_SLAVE_SYSTEM_CONTROL) += spi-slave-system-control.o > > diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c > > new file mode 100644 > > index 0000000..2aa12f3 > > --- /dev/null > > +++ b/drivers/spi/spi-slave-mt27xx.c > > @@ -0,0 +1,613 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +// > > +// Copyright (c) 2018 MediaTek Inc. > > +// Author: Leilk Liu > > +// > > +// This program is free software; you can redistribute it and/or modify > > +// it under the terms of the GNU General Public License version 2 as > > +// published by the Free Software Foundation. > > +// > > +// This program is distributed in the hope that it will be useful, > > +// but WITHOUT ANY WARRANTY; without even the implied warranty of > > +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +// GNU General Public License for more details. > > + > > you can drop long disclaimer because you already had SPDX style license > OK, I'll fix it, thanks > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define SPIS_IRQ_EN_REG 0x0 > > +#define SPIS_IRQ_CLR_REG 0x4 > > +#define SPIS_IRQ_ST_REG 0x8 > > +#define SPIS_IRQ_MASK_REG 0xc > > +#define SPIS_CFG_REG 0x10 > > +#define SPIS_RX_DATA_REG 0x14 > > +#define SPIS_TX_DATA_REG 0x18 > > +#define SPIS_RX_DST_REG 0x1c > > +#define SPIS_TX_SRC_REG 0x20 > > +#define SPIS_RX_CMD_REG 0x24 > > +#define SPIS_FIFO_ST_REG 0x28 > > +#define SPIS_MON_SEL_REG 0x2c > > +#define SPIS_DMA_CFG_REG 0x30 > > +#define SPIS_FIFO_THR_REG 0x34 > > +#define SPIS_DEBUG_ST_REG 0x38 > > +#define SPIS_BYTE_CNT_REG 0x3c > > +#define SPIS_SOFT_RST_REG 0x40 > > + > > +/* SPIS_IRQ_EN_REG */ > > +#define DMA_DONE_EN BIT(7) > > +#define TX_FIFO_EMPTY_EN BIT(6) > > +#define TX_FIFO_FULL_EN BIT(5) > > +#define RX_FIFO_EMPTY_EN BIT(4) > > +#define RX_FIFO_FULL_EN BIT(3) > > +#define DATA_DONE_EN BIT(2) > > +#define RSTA_DONE_EN BIT(1) > > +#define CMD_INVALID_EN BIT(0) > > + > > +/* SPIS_IRQ_CLR_REG */ > > +#define DMA_DONE_CLR BIT(7) > > +#define TX_FIFO_EMPTY_CLR BIT(6) > > +#define TX_FIFO_FULL_CLR BIT(5) > > +#define RX_FIFO_EMPTY_CLR BIT(4) > > +#define RX_FIFO_FULL_CLR BIT(3) > > +#define DATA_DONE_CLR BIT(2) > > +#define RSTA_DONE_CLR BIT(1) > > +#define CMD_INVALID_CLR BIT(0) > > + > > +/* SPIS_IRQ_ST_REG */ > > +#define DMA_DONE_ST BIT(7) > > +#define TX_FIFO_EMPTY_ST BIT(6) > > +#define TX_FIFO_FULL_ST BIT(5) > > +#define RX_FIFO_EMPTY_ST BIT(4) > > +#define RX_FIFO_FULL_ST BIT(3) > > +#define DATA_DONE_ST BIT(2) > > +#define RSTA_DONE_ST BIT(1) > > +#define CMD_INVALID_ST BIT(0) > > + > > +/* SPIS_IRQ_MASK_REG */ > > +#define DMA_DONE_MASK BIT(7) > > +#define DATA_DONE_MASK BIT(2) > > +#define RSTA_DONE_MASK BIT(1) > > +#define CMD_INVALID_MASK BIT(0) > > + > > +/* SPIS_CFG_REG */ > > +#define SPIS_TX_ENDIAN BIT(7) > > +#define SPIS_RX_ENDIAN BIT(6) > > +#define SPIS_TXMSBF BIT(5) > > +#define SPIS_RXMSBF BIT(4) > > +#define SPIS_CPHA BIT(3) > > +#define SPIS_CPOL BIT(2) > > +#define SPIS_TX_EN BIT(1) > > +#define SPIS_RX_EN BIT(0) > > + > > +/* SPIS_DMA_CFG_REG */ > > +#define TX_DMA_TRIG_EN BIT(31) > > +#define TX_DMA_EN BIT(30) > > +#define RX_DMA_EN BIT(29) > > +#define TX_DMA_LEN 0xfffff > > + > > +/* SPIS_SOFT_RST_REG */ > > +#define SPIS_DMA_ADDR_EN BIT(1) > > +#define SPIS_SOFT_RST BIT(0) > > + > > +#define MTK_SPI_SLAVE_MAX_FIFO_SIZE 512U > > + > > +struct mtk_spi_slave { > > + struct device *dev; > > + void __iomem *base; > > + struct clk *parent_clk, *sel_clk, *spi_clk; > > consider that parent clk should be configured in dts > by these property assigned-clocks, assigned-clock-parents. in that way, the driver > don't bother with what the parent and sel clock are and becomes more configurable. > OK, I'll fix it, thanks > > + struct completion xfer_done; > > + struct spi_transfer *cur_transfer; > > + bool slave_aborted; > > +}; > > + > > +static const struct of_device_id mtk_spi_slave_of_match[] = { > > + { .compatible = "mediatek,mt2712-spi-slave", }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, mtk_spi_slave_of_match); > > + > > +static void mtk_spi_slave_disable_dma(struct mtk_spi_slave *mdata) > > +{ > > + u32 reg_val; > > + > > + reg_val = readl(mdata->base + SPIS_DMA_CFG_REG); > > + reg_val &= ~RX_DMA_EN; > > + reg_val &= ~TX_DMA_EN; > > + writel(reg_val, mdata->base + SPIS_DMA_CFG_REG); > > +} > > + > > +static void mtk_spi_slave_disable_xfer(struct mtk_spi_slave *mdata) > > +{ > > + u32 reg_val; > > + > > + reg_val = readl(mdata->base + SPIS_CFG_REG); > > + reg_val &= ~SPIS_TX_EN; > > + reg_val &= ~SPIS_RX_EN; > > + writel(reg_val, mdata->base + SPIS_CFG_REG); > > +} > > + > > +static int mtk_spi_slave_wait_for_completion(struct mtk_spi_slave *mdata) > > +{ > > + if (wait_for_completion_interruptible(&mdata->xfer_done) || > > + mdata->slave_aborted) { > > + pr_err("interrupted\n"); > > dev_err? > OK, I'll fix it, thanks > > > + return -EINTR; > > + } > > + > > + return 0; > > +} > > + > > +static int mtk_spi_slave_prepare_message(struct spi_controller *ctlr, > > + struct spi_message *msg) > > +{ > > + u16 cpha, cpol; > > bool? > OK, I'll fix it, thanks > > + u32 reg_val; > > + struct spi_device *spi = msg->spi; > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > how about using reverse xmas tree declarations for be readable? that means ordering declarations longest to shortest > OK, I'll fix it, thanks > > + cpha = spi->mode & SPI_CPHA ? 1 : 0; > > + cpol = spi->mode & SPI_CPOL ? 1 : 0; > > + > > + reg_val = readl(mdata->base + SPIS_CFG_REG); > > + if (cpha) > > + reg_val |= SPIS_CPHA; > > + else > > + reg_val &= ~SPIS_CPHA; > > + if (cpol) > > + reg_val |= SPIS_CPOL; > > + else > > + reg_val &= ~SPIS_CPOL; > > + > > + if (spi->mode & SPI_LSB_FIRST) > > + reg_val &= ~(SPIS_TXMSBF | SPIS_RXMSBF); > > + else > > + reg_val |= SPIS_TXMSBF | SPIS_RXMSBF; > > + > > + /* set the tx/rx endian */ > > +#ifdef __LITTLE_ENDIAN > > + reg_val &= ~SPIS_TX_ENDIAN; > > + reg_val &= ~SPIS_RX_ENDIAN; > > +#else > > + reg_val |= SPIS_TX_ENDIAN; > > + reg_val |= SPIS_RX_ENDIAN; > > +#endif > > + writel(reg_val, mdata->base + SPIS_CFG_REG); > > + > > + return 0; > > +} > > + > > +static int mtk_spi_slave_fifo_transfer(struct spi_controller *ctlr, > > + struct spi_device *spi, > > + struct spi_transfer *xfer) > > +{ > > + int reg_val, cnt, remainder, ret; > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > reverse xmas tree declarations ? > OK, I'll fix it, thanks > > + writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG); > > + > > + reg_val = readl(mdata->base + SPIS_CFG_REG); > > + if (xfer->rx_buf) > > + reg_val |= SPIS_RX_EN; > > + if (xfer->tx_buf) > > + reg_val |= SPIS_TX_EN; > > + writel(reg_val, mdata->base + SPIS_CFG_REG); > > + > > + cnt = xfer->len / 4; > > + if (xfer->tx_buf) > > + iowrite32_rep(mdata->base + SPIS_TX_DATA_REG, > > + xfer->tx_buf, cnt); > > + > > + remainder = xfer->len % 4; > > + if (xfer->tx_buf && remainder > 0) { > > + reg_val = 0; > > + memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder); > > + writel(reg_val, mdata->base + SPIS_TX_DATA_REG); > > + } > > + > > + ret = mtk_spi_slave_wait_for_completion(mdata); > > + if (ret) { > > + mtk_spi_slave_disable_xfer(mdata); > > + writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG); > > + } > > + > > + return ret; > > +} > > + > > +static int mtk_spi_slave_dma_transfer(struct spi_controller *ctlr, > > + struct spi_device *spi, > > + struct spi_transfer *xfer) > > +{ > > + int reg_val, ret; > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + struct device *dev = mdata->dev; > > + > > + writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG); > > + > > + if (xfer->tx_buf) { > > + xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf, > > + xfer->len, DMA_TO_DEVICE); > > + if (dma_mapping_error(dev, xfer->tx_dma)) { > > + ret = -ENOMEM; > > + goto disable_transfer; > > + } > > + } > > + > > + if (xfer->rx_buf) { > > + xfer->rx_dma = dma_map_single(dev, (void *)xfer->rx_buf, > > + xfer->len, DMA_FROM_DEVICE); > > + if (dma_mapping_error(dev, xfer->rx_dma)) { > > + ret = -ENOMEM; > > + goto unmap_txdma; > > + } > > + } > > + > > + writel(xfer->tx_dma, mdata->base + SPIS_TX_SRC_REG); > > + writel(xfer->rx_dma, mdata->base + SPIS_RX_DST_REG); > > + > > + writel(SPIS_DMA_ADDR_EN, mdata->base + SPIS_SOFT_RST_REG); > > + > > + /* enable config reg tx rx_enable */ > > + reg_val = readl(mdata->base + SPIS_CFG_REG); > > + if (xfer->tx_buf) > > + reg_val |= SPIS_TX_EN; > > + if (xfer->rx_buf) > > + reg_val |= SPIS_RX_EN; > > + writel(reg_val, mdata->base + SPIS_CFG_REG); > > + > > + /* config dma */ > > + reg_val = 0; > > + reg_val &= ~TX_DMA_LEN; > > it seems it no needs the extra clear bit > OK, I'll fix it, thanks > > + reg_val |= (xfer->len - 1) & TX_DMA_LEN; > > + writel(reg_val, mdata->base + SPIS_DMA_CFG_REG); > > + > > + reg_val = readl(mdata->base + SPIS_DMA_CFG_REG); > > + if (xfer->tx_buf) > > + reg_val |= TX_DMA_EN; > > + if (xfer->rx_buf) > > + reg_val |= RX_DMA_EN; > > + reg_val |= TX_DMA_TRIG_EN; > > + writel(reg_val, mdata->base + SPIS_DMA_CFG_REG); > > + > > + ret = mtk_spi_slave_wait_for_completion(mdata); > > + if (ret) > > + goto unmap_rxdma; > > + > > + return 0; > > + > > +unmap_rxdma: > > + if (xfer->rx_buf) > > + dma_unmap_single(dev, xfer->rx_dma, > > + xfer->len, DMA_FROM_DEVICE); > > + > > +unmap_txdma: > > + if (xfer->tx_buf) > > + dma_unmap_single(dev, xfer->tx_dma, > > + xfer->len, DMA_TO_DEVICE); > > + > > +disable_transfer: > > + mtk_spi_slave_disable_dma(mdata); > > + mtk_spi_slave_disable_xfer(mdata); > > + writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG); > > + > > + return ret; > > +} > > + > > +static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr, > > + struct spi_device *spi, > > + struct spi_transfer *xfer) > > +{ > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > + reinit_completion(&mdata->xfer_done); > > + mdata->slave_aborted = false; > > + mdata->cur_transfer = xfer; > > + > > + if (xfer->len > MTK_SPI_SLAVE_MAX_FIFO_SIZE) > > + return mtk_spi_slave_dma_transfer(ctlr, spi, xfer); > > + else > > + return mtk_spi_slave_fifo_transfer(ctlr, spi, xfer); > > +} > > + > > +static int mtk_spi_slave_setup(struct spi_device *spi) > > +{ > > + u32 reg_val; > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master); > > reverse xmas tree declarations ? > OK, I'll fix it, thanks > > + reg_val = DMA_DONE_EN | DATA_DONE_EN | > > + RSTA_DONE_EN | CMD_INVALID_EN; > > + writel(reg_val, mdata->base + SPIS_IRQ_EN_REG); > > + > > + reg_val = DMA_DONE_MASK | DATA_DONE_MASK | > > + RSTA_DONE_MASK | CMD_INVALID_MASK; > > + writel(reg_val, mdata->base + SPIS_IRQ_MASK_REG); > > + > > + mtk_spi_slave_disable_dma(mdata); > > + mtk_spi_slave_disable_xfer(mdata); > > + > > + return 0; > > +} > > + > > +static int mtk_slave_abort(struct spi_controller *ctlr) > > +{ > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > + mdata->slave_aborted = true; > > + complete(&mdata->xfer_done); > > + > > + return 0; > > +} > > + > > +static irqreturn_t mtk_spi_slave_interrupt(int irq, void *dev_id) > > +{ > > + u32 cmd, int_status, reg_val, cnt, remainder; > > + struct spi_controller *ctlr = dev_id; > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + struct spi_transfer *trans = mdata->cur_transfer; > > + > > + int_status = readl(mdata->base + SPIS_IRQ_ST_REG); > > + writel(int_status, mdata->base + SPIS_IRQ_CLR_REG); > > I supposed you already have disabled these bit the isr can't handle > yes. It's disabled in mtk_spi_slave_setup() which would be called when probe. > > + if (!trans) > > + return IRQ_HANDLED; > > + > > + if ((int_status & DMA_DONE_ST) && > > + ((int_status & DATA_DONE_ST) || > > + (int_status & RSTA_DONE_ST))) { > > + writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG); > > + > > + mtk_spi_slave_disable_dma(mdata); > > + mtk_spi_slave_disable_xfer(mdata); > > + > > + if (trans->tx_buf) > > + dma_unmap_single(mdata->dev, trans->tx_dma, > > + trans->len, DMA_TO_DEVICE); > > + if (trans->rx_buf) > > + dma_unmap_single(mdata->dev, trans->rx_dma, > > + trans->len, DMA_FROM_DEVICE); > > + } > > + > > + if ((!(int_status & DMA_DONE_ST)) && > > + ((int_status & DATA_DONE_ST) || > > + (int_status & RSTA_DONE_ST))) { > > is the condition both for dma and fifo mode ? > > and it seems there is a missing disable_xfer for fifo mode > this condition is for transfer data or read status by dma mode. if it's dma mode of transfer data, the HW assert the status:DMA_DONE_ST & DATA_DONE_ST. if it's dma mode of read status, the HW assert the status:DMA_DONE_ST & RSTA_DONE_ST. > > + cnt = trans->len / 4; > > + if (trans->rx_buf) > > + ioread32_rep(mdata->base + SPIS_RX_DATA_REG, > > + trans->rx_buf, cnt); > > + remainder = trans->len % 4; > > + if (trans->rx_buf && remainder > 0) { > > + reg_val = readl(mdata->base + SPIS_RX_DATA_REG); > > + memcpy(trans->rx_buf + (cnt * 4), > > parentheses around cnt * 4 is not needed, and no parentheses should be clearer enough > OK, I'll fix it, thanks > > + ®_val, remainder); > > + } > > + > > + mtk_spi_slave_disable_xfer(mdata); > > a little confused you put disable xfer last at fifo mode, but put first at dma mode > OK, I'll also put disable xfer last at dma mode. thanks. > > + } > > + > > + if (int_status & CMD_INVALID_ST) > > + dev_err(&ctlr->dev, "cmd invalid\n"); > > + > > + mdata->cur_transfer = NULL; > > + complete(&mdata->xfer_done); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int mtk_spi_slave_probe(struct platform_device *pdev) > > +{ > > + struct spi_controller *ctlr; > > + struct mtk_spi_slave *mdata; > > + const struct of_device_id *of_id; > > + struct resource *res; > > + int i, irq, ret; > > + > > reverse xmas tree declarations ? > OK, I'll fix it, thanks > > + ctlr = spi_alloc_slave(&pdev->dev, sizeof(*mdata)); > > + if (!ctlr) { > > + dev_err(&pdev->dev, "failed to alloc spi slave\n"); > > + return -ENOMEM; > > + } > > + > > + ctlr->auto_runtime_pm = true; > > + ctlr->dev.of_node = pdev->dev.of_node; > > + ctlr->mode_bits = SPI_CPOL | SPI_CPHA; > > + ctlr->mode_bits |= SPI_LSB_FIRST; > > + > > + ctlr->prepare_message = mtk_spi_slave_prepare_message; > > + ctlr->transfer_one = mtk_spi_slave_transfer_one; > > + ctlr->setup = mtk_spi_slave_setup; > > + ctlr->slave_abort = mtk_slave_abort; > > + > > + mdata = spi_controller_get_devdata(ctlr); > > + > > + platform_set_drvdata(pdev, ctlr); > > + > > + init_completion(&mdata->xfer_done); > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!res) { > > + ret = -ENODEV; > > + dev_err(&pdev->dev, "failed to determine base address\n"); > > + goto err_put_ctlr; > > + } > > + > > + mdata->dev = &pdev->dev; > > + > > + mdata->base = devm_ioremap_resource(&pdev->dev, res); > > + if (IS_ERR(mdata->base)) { > > + ret = PTR_ERR(mdata->base); > > + goto err_put_ctlr; > > + } > > + > > + irq = platform_get_irq(pdev, 0); > > + if (irq < 0) { > > + dev_err(&pdev->dev, "failed to get irq (%d)\n", irq); > > + ret = irq; > > + goto err_put_ctlr; > > + } > > + > > + ret = devm_request_irq(&pdev->dev, irq, mtk_spi_slave_interrupt, > > + IRQF_TRIGGER_NONE, dev_name(&pdev->dev), ctlr); > > + if (ret) { > > + dev_err(&pdev->dev, "failed to register irq (%d)\n", ret); > > + goto err_put_ctlr; > > + } > > + > > + mdata->parent_clk = devm_clk_get(&pdev->dev, "parent-clk"); > > + if (IS_ERR(mdata->parent_clk)) { > > + ret = PTR_ERR(mdata->parent_clk); > > + dev_err(&pdev->dev, "failed to get parent-clk: %d\n", ret); > > + goto err_put_ctlr; > > + } > > + > > + mdata->sel_clk = devm_clk_get(&pdev->dev, "sel-clk"); > > + if (IS_ERR(mdata->sel_clk)) { > > + ret = PTR_ERR(mdata->sel_clk); > > + dev_err(&pdev->dev, "failed to get sel-clk: %d\n", ret); > > + goto err_put_ctlr; > > + } > > + > > + mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk"); > > + if (IS_ERR(mdata->spi_clk)) { > > + ret = PTR_ERR(mdata->spi_clk); > > + dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret); > > + goto err_put_ctlr; > > + } > > + > > + ret = clk_prepare_enable(mdata->spi_clk); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to enable spi_clk (%d)\n", ret); > > + goto err_put_ctlr; > > + } > > + > > + ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); > > + goto err_disable_clk; > > + } > > + > > consider more about parent and sel clock assignment in the dts, that way would > help the driver to be portable on each soc > OK, I'll fix it, thanks > > + pm_runtime_enable(&pdev->dev); > > disable interrupt bits the isr doesn't support to > > > + ret = devm_spi_register_controller(&pdev->dev, ctlr); > > + if (ret) { > > + dev_err(&pdev->dev, > > + "failed to register slave controller(%d)\n", ret); > > + goto err_disable_runtime_pm; > > + } > > + > > + clk_disable_unprepare(mdata->spi_clk); > > + > > + return 0; > > + > > +err_disable_runtime_pm: > > + pm_runtime_disable(&pdev->dev); > > +err_disable_clk: > > + clk_disable_unprepare(mdata->spi_clk); > > +err_put_ctlr: > > + spi_controller_put(ctlr); > > + > > + return ret; > > +} > > + > > +static int mtk_spi_slave_remove(struct platform_device *pdev) > > +{ > > + struct spi_controller *ctlr = platform_get_drvdata(pdev); > > + > > + pm_runtime_disable(&pdev->dev); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int mtk_spi_slave_suspend(struct device *dev) > > +{ > > + int ret; > > + struct spi_controller *ctlr = dev_get_drvdata(dev); > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > + ret = spi_controller_suspend(ctlr); > > + if (ret) > > + return ret; > > + > > + if (!pm_runtime_suspended(dev)) > > + clk_disable_unprepare(mdata->spi_clk); > > + > > + return ret; > > +} > > + > > +static int mtk_spi_slave_resume(struct device *dev) > > +{ > > + int ret; > > + struct spi_controller *ctlr = dev_get_drvdata(dev); > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > + if (!pm_runtime_suspended(dev)) { > > + ret = clk_prepare_enable(mdata->spi_clk); > > + if (ret < 0) { > > + dev_err(dev, "failed to enable spi_clk (%d)\n", ret); > > + return ret; > > + } > > + } > > + > > + ret = spi_controller_resume(ctlr); > > + if (ret < 0) > > + clk_disable_unprepare(mdata->spi_clk); > > + > > + return ret; > > +} > > +#endif /* CONFIG_PM_SLEEP */ > > + > > +#ifdef CONFIG_PM > > +static int mtk_spi_slave_runtime_suspend(struct device *dev) > > +{ > > + struct spi_controller *ctlr = dev_get_drvdata(dev); > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + > > + clk_disable_unprepare(mdata->spi_clk); > > + > > + return 0; > > +} > > + > > +static int mtk_spi_slave_runtime_resume(struct device *dev) > > +{ > > + struct spi_controller *ctlr = dev_get_drvdata(dev); > > + struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr); > > + int ret; > > + > > + ret = clk_prepare_enable(mdata->spi_clk); > > + if (ret < 0) { > > + dev_err(dev, "failed to enable spi_clk (%d)\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > +#endif /* CONFIG_PM */ > > + > > +static const struct dev_pm_ops mtk_spi_slave_pm = { > > + SET_SYSTEM_SLEEP_PM_OPS(mtk_spi_slave_suspend, mtk_spi_slave_resume) > > + SET_RUNTIME_PM_OPS(mtk_spi_slave_runtime_suspend, > > + mtk_spi_slave_runtime_resume, NULL) > > +}; > > + > > +static struct platform_driver mtk_spi_slave_driver = { > > + .driver = { > > + .name = "mtk-spi-slave", > > + .pm = &mtk_spi_slave_pm, > > + .of_match_table = mtk_spi_slave_of_match, > > + }, > > + .probe = mtk_spi_slave_probe, > > + .remove = mtk_spi_slave_remove, > > +}; > > + > > +module_platform_driver(mtk_spi_slave_driver); > > + > > +MODULE_DESCRIPTION("MTK SPI Slave Controller driver"); > > +MODULE_AUTHOR("Leilk Liu "); > > +MODULE_LICENSE("GPL v2"); > > +MODULE_ALIAS("platform:mtk-spi-slave"); > > >