From: <honghui.zhang@mediatek.com>
To: lorenzo.pieralisi@arm.com, marc.zyngier@arm.com,
bhelgaas@google.com, matthias.bgg@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
yingjoe.chen@mediatek.com, eddie.huang@mediatek.com,
ryder.lee@mediatek.com
Cc: ulf.hansson@linaro.org, honghui.zhang@mediatek.com,
hongkun.cao@mediatek.com, youlin.pei@mediatek.com,
yong.wu@mediatek.com, yt.shen@mediatek.com,
sean.wang@mediatek.com, xinping.qian@mediatek.com
Subject: [PATCH v4 2/4] PCI: mediatek: enable msi after clock enabled
Date: Mon, 10 Sep 2018 17:50:21 +0800 [thread overview]
Message-ID: <1536573023-6720-3-git-send-email-honghui.zhang@mediatek.com> (raw)
In-Reply-To: <1536573023-6720-1-git-send-email-honghui.zhang@mediatek.com>
From: Honghui Zhang <honghui.zhang@mediatek.com>
The clocks was not enabled when enable MSI. This patch fix this
issue by calling mtk_pcie_enable_msi in mtk_pcie_startup_port_v2
since the clock was all enabled at that time.
The function of mtk_pcie_startup_port_v2's define location is
re-arranged to avoid mtk_pcie_enable_msi's forward declaration.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/pci/controller/pcie-mediatek.c | 143 +++++++++++++++++----------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 20b9088..5aba43a 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -398,75 +398,6 @@ static struct pci_ops mtk_pcie_ops_v2 = {
.write = mtk_pcie_config_write,
};
-static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
-{
- struct mtk_pcie *pcie = port->pcie;
- struct resource *mem = &pcie->mem;
- const struct mtk_pcie_soc *soc = port->pcie->soc;
- u32 val;
- size_t size;
- int err;
-
- /* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
- if (pcie->base) {
- val = readl(pcie->base + PCIE_SYS_CFG_V2);
- val |= PCIE_CSR_LTSSM_EN(port->slot) |
- PCIE_CSR_ASPM_L1_EN(port->slot);
- writel(val, pcie->base + PCIE_SYS_CFG_V2);
- }
-
- /* Assert all reset signals */
- writel(0, port->base + PCIE_RST_CTRL);
-
- /*
- * Enable PCIe link down reset, if link status changed from link up to
- * link down, this will reset MAC control registers and configuration
- * space.
- */
- writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
-
- /* De-assert PHY, PE, PIPE, MAC and configuration reset */
- val = readl(port->base + PCIE_RST_CTRL);
- val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
- PCIE_MAC_SRSTB | PCIE_CRSTB;
- writel(val, port->base + PCIE_RST_CTRL);
-
- /* Set up vendor ID and class code */
- if (soc->need_fix_class_id) {
- val = PCI_VENDOR_ID_MEDIATEK;
- writew(val, port->base + PCIE_CONF_VEND_ID);
-
- val = PCI_CLASS_BRIDGE_HOST;
- writew(val, port->base + PCIE_CONF_CLASS_ID);
- }
-
- /* 100ms timeout value should be enough for Gen1/2 training */
- err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
- !!(val & PCIE_PORT_LINKUP_V2), 20,
- 100 * USEC_PER_MSEC);
- if (err)
- return -ETIMEDOUT;
-
- /* Set INTx mask */
- val = readl(port->base + PCIE_INT_MASK);
- val &= ~INTX_MASK;
- writel(val, port->base + PCIE_INT_MASK);
-
- /* Set AHB to PCIe translation windows */
- size = mem->end - mem->start;
- val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
- writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
-
- val = upper_32_bits(mem->start);
- writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
-
- /* Set PCIe to AXI translation memory space.*/
- val = fls(0xffffffff) | WIN_ENABLE;
- writel(val, port->base + PCIE_AXI_WINDOW0);
-
- return 0;
-}
-
static void mtk_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct mtk_pcie_port *port = irq_data_get_irq_chip_data(data);
@@ -643,8 +574,6 @@ static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
ret = mtk_pcie_allocate_msi_domains(port);
if (ret)
return ret;
-
- mtk_pcie_enable_msi(port);
}
return 0;
@@ -711,6 +640,78 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
return 0;
}
+static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
+{
+ struct mtk_pcie *pcie = port->pcie;
+ struct resource *mem = &pcie->mem;
+ const struct mtk_pcie_soc *soc = port->pcie->soc;
+ u32 val;
+ size_t size;
+ int err;
+
+ /* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
+ if (pcie->base) {
+ val = readl(pcie->base + PCIE_SYS_CFG_V2);
+ val |= PCIE_CSR_LTSSM_EN(port->slot) |
+ PCIE_CSR_ASPM_L1_EN(port->slot);
+ writel(val, pcie->base + PCIE_SYS_CFG_V2);
+ }
+
+ /* Assert all reset signals */
+ writel(0, port->base + PCIE_RST_CTRL);
+
+ /*
+ * Enable PCIe link down reset, if link status changed from link up to
+ * link down, this will reset MAC control registers and configuration
+ * space.
+ */
+ writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+
+ /* De-assert PHY, PE, PIPE, MAC and configuration reset */
+ val = readl(port->base + PCIE_RST_CTRL);
+ val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+ PCIE_MAC_SRSTB | PCIE_CRSTB;
+ writel(val, port->base + PCIE_RST_CTRL);
+
+ /* Set up vendor ID and class code */
+ if (soc->need_fix_class_id) {
+ val = PCI_VENDOR_ID_MEDIATEK;
+ writew(val, port->base + PCIE_CONF_VEND_ID);
+
+ val = PCI_CLASS_BRIDGE_HOST;
+ writew(val, port->base + PCIE_CONF_CLASS_ID);
+ }
+
+ /* 100ms timeout value should be enough for Gen1/2 training */
+ err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
+ !!(val & PCIE_PORT_LINKUP_V2), 20,
+ 100 * USEC_PER_MSEC);
+ if (err)
+ return -ETIMEDOUT;
+
+ /* Set INTx mask */
+ val = readl(port->base + PCIE_INT_MASK);
+ val &= ~INTX_MASK;
+ writel(val, port->base + PCIE_INT_MASK);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ mtk_pcie_enable_msi(port);
+
+ /* Set AHB to PCIe translation windows */
+ size = mem->end - mem->start;
+ val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
+
+ val = upper_32_bits(mem->start);
+ writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
+
+ /* Set PCIe to AXI translation memory space.*/
+ val = fls(0xffffffff) | WIN_ENABLE;
+ writel(val, port->base + PCIE_AXI_WINDOW0);
+
+ return 0;
+}
+
static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus,
unsigned int devfn, int where)
{
--
2.6.4
next prev parent reply other threads:[~2018-09-10 9:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-10 9:50 [PATCH v4 0/4] PCI: mediatek: fixup find_port, enable_msi and add pm, module support honghui.zhang
2018-09-10 9:50 ` [PATCH v4 1/4] PCI: mediatek: fixup mtk_pcie_find_port logical honghui.zhang
2018-09-21 16:07 ` Lorenzo Pieralisi
2018-09-26 9:06 ` Honghui Zhang
2018-09-10 9:50 ` honghui.zhang [this message]
2018-09-21 16:46 ` [PATCH v4 2/4] PCI: mediatek: enable msi after clock enabled Lorenzo Pieralisi
2018-09-26 9:08 ` Honghui Zhang
2018-09-10 9:50 ` [PATCH v4 3/4] PCI: mediatek: Add system pm support for MT2712 and MT7622 honghui.zhang
2018-09-10 9:50 ` [PATCH v4 4/4] PCI: mediatek: Add loadable kernel module support honghui.zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1536573023-6720-3-git-send-email-honghui.zhang@mediatek.com \
--to=honghui.zhang@mediatek.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=hongkun.cao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marc.zyngier@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=ulf.hansson@linaro.org \
--cc=xinping.qian@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
--cc=yong.wu@mediatek.com \
--cc=youlin.pei@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).