From: Hanjie Lin <hanjie.lin@amlogic.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Hanjie Lin <hanjie.lin@amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Rob Herring <robh@kernel.org>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Niklas Cassel <niklas.cassel@axis.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Jianguo Sun <sunjianguo1@huawei.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Cyrille Pitchen <cyrille.pitchen@free-electrons.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
Yixun Lan <yixun.lan@amlogic.com>,
Liang Yang <liang.yang@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>, Jian Hu <jian.hu@amlogic>
Subject: [RESEND PATCH v3 0/2] add the Amlogic Meson PCIe controller driver
Date: Fri, 21 Sep 2018 14:03:38 +0800 [thread overview]
Message-ID: <1537509820-52040-1-git-send-email-hanjie.lin@amlogic.com> (raw)
This is v3 post RESEND: [2]
- add Rob's Reviewed-by to patch 1/2
- add more to&cc list suggested by get_maintainer.pl
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
PCI core. This patchset add the driver and dt-bindings of the controller.
Till patch v2, we have a dedicated phy driver which only process reset job.
It's too overkill so we integrate phy driver into the controller.
Changes since v2: [1]
- abandon phy driver, move reset to the controller
- use devm_add_action_or_reset() to use clock res
- format correcting
Changes since v1: [0]
- use gpio lib instead open code
- move 'apb' and 'port' reset from phy driver
- format correcting
[0] : https://lkml.kernel.org/r/1534227522-186798-1-git-send-email-hanjie.lin@amlogic.com
[1] : https://lkml.kernel.org/r/1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com
[2] : https://lkml.kernel.org/r/1535616829-167936-1-git-send-email-hanjie.lin@amlogic.com
Yue Wang (2):
dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe
controller
PCI: meson: add the Amlogic Meson PCIe controller driver
.../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 +++
drivers/pci/controller/dwc/Kconfig | 12 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pci-meson.c | 617 +++++++++++++++++++++
4 files changed, 700 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
create mode 100644 drivers/pci/controller/dwc/pci-meson.c
--
2.7.4
next reply other threads:[~2018-09-21 6:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 6:03 Hanjie Lin [this message]
2018-09-21 6:03 ` [RESEND PATCH v3 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller Hanjie Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537509820-52040-1-git-send-email-hanjie.lin@amlogic.com \
--to=hanjie.lin@amlogic.com \
--cc=bhelgaas@google.com \
--cc=carlo@caione.org \
--cc=cyrille.pitchen@free-electrons.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic \
--cc=jianxin.pan@amlogic.com \
--cc=khilman@baylibre.com \
--cc=liang.yang@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=niklas.cassel@axis.com \
--cc=pombredanne@nexb.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=sunjianguo1@huawei.com \
--cc=yixun.lan@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).