From mboxrd@z Thu Jan 1 00:00:00 1970 From: Al Cooper Subject: [PATCH 5/5] usb: host: Enable building of new Broadcom STB USB drivers Date: Wed, 26 Sep 2018 18:20:14 -0400 Message-ID: <1538000414-24873-6-git-send-email-alcooperx@gmail.com> References: <1538000414-24873-1-git-send-email-alcooperx@gmail.com> Return-path: In-Reply-To: <1538000414-24873-1-git-send-email-alcooperx@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Al Cooper , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Alan Stern , Mathias Nyman , Mauro Carvalho Chehab , "David S. Miller" , Andrew Morton , Arnd Bergmann , Dmitry Osipenko , Chunfeng Yun , Jianguo Sun , James Hogan , Alban Bedel , Lu Baolu , Avi Fishman , Alex Elder , Hans de Goede , linux-usb@vger.kernel.org, dev List-Id: devicetree@vger.kernel.org Changes to Makefile and Kconfig to enable building of the new Broadcom STB OHCI, EHCI and XHCI drivers. Also update MAINTAINERS. Signed-off-by: Al Cooper --- MAINTAINERS | 9 +++++++++ drivers/usb/host/Kconfig | 27 +++++++++++++++++++++++++++ drivers/usb/host/Makefile | 7 +++++++ 3 files changed, 43 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 02a39617ec82..9b8e7caad2ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3007,6 +3007,15 @@ S: Supported F: drivers/gpio/gpio-brcmstb.c F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt +BROADCOM BRCMSTB USB XHCI, EHCI and OHCI DRIVERS +M: Al Cooper +L: linux-usb@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: drivers/usb/host/xhci-brcm.c +F: drivers/usb/host/ehci-brcm.c +F: drivers/usb/host/ohci-brcm.c + BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER M: Al Cooper L: linux-kernel@vger.kernel.org diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1a4ea98cac2a..1693a5076980 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -798,3 +798,30 @@ config USB_HCD_TEST_MODE This option is of interest only to developers who need to validate their USB hardware designs. It is not needed for normal use. If unsure, say N. + +config USB_OHCI_BRCM + tristate + +config USB_EHCI_BRCM + tristate + +config USB_XHCI_BRCM + tristate + +config BRCM_USB_PHY + tristate + +config USB_BRCM + tristate "Broadcom STB USB support" + depends on ARCH_BRCMSTB + select USB_OHCI_BRCM if USB_OHCI_HCD + select USB_EHCI_BRCM if USB_EHCI_HCD + select USB_XHCI_BRCM if USB_XHCI_HCD + select BRCM_USB_PHY if USB_OHCI_HCD || USB_EHCI_HCD || USB_XHCI_HCD + select GENERIC_PHY if BRCM_USB_PHY + default ARCH_BRCMSTB + help + Say Y to enable the drivers for the onchip USB controllers. + + If your chipset supports power management, disabling this driver + will keep the device permanently powered down. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e6235269c151..13e4f45a3a1d 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -91,3 +91,10 @@ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o + +# The order is important here because it controls the order that +# the drivers will be initialized and we always need to init +# the drivers in the order XHCI, EHCI and OHCI. +obj-$(CONFIG_USB_XHCI_BRCM) += xhci-brcm.o +obj-$(CONFIG_USB_EHCI_BRCM) += ehci-brcm.o +obj-$(CONFIG_USB_OHCI_BRCM) += ohci-brcm.o -- 1.9.0.138.g2de3478