From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
benjamin.gaignard@linaro.org, Gerald Baeza <gerald.baeza@st.com>,
Loic Pallardy <loic.pallardy@st.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-mmc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V4 13/25] mmc: mmci: add datactrl block size variant property
Date: Tue, 2 Oct 2018 14:09:15 +0200 [thread overview]
Message-ID: <1538482167-13819-14-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1538482167-13819-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch allows to define a datactrl block size
by variant, requested by STM32 sdmmc variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.c | 13 +++++++++++--
drivers/mmc/host/mmci.h | 2 ++
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index c221955..59a2188 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -51,6 +51,7 @@ static struct variant_data variant_arm = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.reversed_irq_handling = true,
@@ -64,6 +65,7 @@ static struct variant_data variant_arm_extended_fifo = {
.fifosize = 128 * 4,
.fifohalfsize = 64 * 4,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -77,6 +79,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.fifohalfsize = 64 * 4,
.clkreg_enable = MCI_ARM_HWFCEN,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -91,6 +94,7 @@ static struct variant_data variant_u300 = {
.clkreg_enable = MCI_ST_U300_HWFCEN,
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
@@ -110,6 +114,7 @@ static struct variant_data variant_nomadik = {
.clkreg = MCI_CLK_ENABLE,
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -132,6 +137,7 @@ static struct variant_data variant_ux500 = {
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -159,6 +165,7 @@ static struct variant_data variant_ux500v2 = {
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -186,6 +193,7 @@ static struct variant_data variant_stm32 = {
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -207,6 +215,7 @@ static struct variant_data variant_qcom = {
.data_cmd_enable = MCI_CPSM_QCOM_DATCMD,
.blksz_datactrl4 = true,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 208000000,
.explicit_mclk_control = true,
@@ -1856,13 +1865,13 @@ static int mmci_probe(struct amba_device *dev,
/*
* Block size can be up to 2048 bytes, but must be a power of two.
*/
- mmc->max_blk_size = 1 << 11;
+ mmc->max_blk_size = 1 << variant->datactrl_blocksz;
/*
* Limit the number of blocks transferred so that we don't overflow
* the maximum request size.
*/
- mmc->max_blk_count = mmc->max_req_size >> 11;
+ mmc->max_blk_count = mmc->max_req_size >> variant->datactrl_blocksz;
spin_lock_init(&host->lock);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 78fa281..042cbef 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -217,6 +217,7 @@ struct mmci_host;
* @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
* register
* @datactrl_mask_sdio: SDIO enable mask in datactrl register
+ * @datactrl_blksz: block size in power of two
* @pwrreg_powerup: power up value for MMCIPOWER register
* @f_max: maximum clk frequency supported by the controller.
* @signal_direction: input/out direction of bus signals can be indicated
@@ -248,6 +249,7 @@ struct variant_data {
unsigned int data_cmd_enable;
unsigned int datactrl_mask_ddrmode;
unsigned int datactrl_mask_sdio;
+ unsigned int datactrl_blocksz;
u8 st_sdio:1;
u8 st_clkdiv:1;
u8 blksz_datactrl16:1;
--
2.7.4
next prev parent reply other threads:[~2018-10-02 12:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-02 12:09 [PATCH V4 00/25] mmc: mmci: add sdmmc variant for stm32 Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 01/25] mmc: mmci: Change struct members from bool to u8 Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 02/25] mmc: mmci: create generic mmci_dma_setup Ludovic Barre
2018-10-03 9:22 ` Ulf Hansson
2018-10-03 11:44 ` Ludovic BARRE
2018-10-02 12:09 ` [PATCH V4 03/25] mmc: mmci: introduce dma_priv pointer to mmci_host Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 04/25] mmc: mmci: merge prepare data functions Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 05/25] mmc: mmci: add prepare/unprepare_data callbacks Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 06/25] mmc: mmci: add get_next_data callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 07/25] mmc: mmci: add dma_release callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 08/25] mmc: mmci: add dma_start callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 09/25] mmc: mmci: add dma_finalize callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 10/25] mmc: mmci: add dma_error callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 11/25] mmc: mmci: add validate_data callback Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 12/25] mmc: mmci: add set_clk/pwrreg callbacks Ludovic Barre
2018-10-02 12:09 ` Ludovic Barre [this message]
2018-10-02 12:09 ` [PATCH V4 14/25] mmc: mmci: expand startbiterr to irqmask and error check Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 15/25] mmc: mmci: add variant properties to define cpsm & cmdresp bits Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 16/25] mmc: mmci: add variant property to define dpsm bit Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 17/25] mmc: mmci: add variant property to define irq pio mask Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 18/25] mmc: mmci: add variant property to write datactrl before command Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 19/25] mmc: mmci: add variant property to not read datacnt Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 20/25] dt-bindings: mmci: add optional reset property Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 21/25] mmc: " Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 22/25] mmc: mmci: add clock divider for stm32 sdmmc Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 23/25] mmc: mmci: add stm32 sdmmc registers Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 24/25] dt-bindings: mmci: add stm32 sdmmc variant Ludovic Barre
2018-10-02 12:09 ` [PATCH V4 25/25] mmc: " Ludovic Barre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538482167-13819-14-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gerald.baeza@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=loic.pallardy@st.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).