From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bhagavathi Perumal S Subject: [PATCH 0/2] ath10k: Add support to configure BB timing for external FEM Date: Thu, 4 Oct 2018 17:12:42 +0530 Message-ID: <1538653364-1239-1-git-send-email-bperumal@codeaurora.org> Return-path: Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org List-Id: devicetree@vger.kernel.org This adds support to choose correct Base Band(BB) timing values based on the input Front End Module(FEM) hardware name from Device Tree entry and configure it in hardware through WMI interface. Since the BB timing values can vary between FEM hardwares and not same as default value used in reference hardware. Bhagavathi Perumal S (2): dt: bindings: add new dt entry to indentify external FEM ath10k: Add support to configure BB timing over wmi .../bindings/net/wireless/qcom,ath10k.txt | 22 ++++++++++ drivers/net/wireless/ath/ath10k/mac.c | 47 ++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 +++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 23 +++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 26 ++++++++++++ 5 files changed, 138 insertions(+) -- 1.9.1