From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damian Kos Subject: [PATCH v6 3/6] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings Date: Mon, 8 Oct 2018 22:42:09 +0100 Message-ID: <1539034953-11274-4-git-send-email-dkos@cadence.com> References: <1539034953-11274-1-git-send-email-dkos@cadence.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1539034953-11274-1-git-send-email-dkos@cadence.com> Sender: linux-kernel-owner@vger.kernel.org To: David Airlie , Rob Herring , Mark Rutland , Archit Taneja , Andrzej Hajda , Laurent Pinchart , Gustavo Padovan , Maarten Lankhorst , Sean Paul , Sandy Huang , =?UTF-8?q?Heiko=20St=C3=BCbner?= , Quentin Schulz , Damian Kos , Piotr Sroka , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org Cc: rafalc@cadence.com, quentin.schulz@bootlin.com, jbergsagel@ti.com List-Id: devicetree@vger.kernel.org From: Quentin Schulz Document the bindings used for the Cadence MHDP DPI/DP bridge. Signed-off-by: Quentin Schulz Signed-off-by: Damian Kos Reviewed-by: Rob Herring --- .../bindings/display/bridge/cdns,mhdp.txt | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt new file mode 100644 index 000000000000..f8334c520b98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt @@ -0,0 +1,43 @@ +Cadence MHDP bridge +========================== + +The Cadence MHDP bridge is a DPI to DP bridge. + +Required properties: +- compatible: should be "cdns,mhdp8546", +- reg: physical base address and length of the controller's registers, +- clocks: DP bridge clock, it's used by the IP to know how to translate + a number of clock cycles into a time (which is used to comply + with DP standard timings and delays), + +Required subnodes: +- ports: Ports as described in Documentation/devictree/bindings/graph.txt + Port 0 - input port representing the DP bridge input + Port 1 - output port representing the DP bridge output + +Example: + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + clocks = <&mhdp_clock>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@1 { + reg = <1>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; -- 2.17.1