From mboxrd@z Thu Jan 1 00:00:00 1970 From: Govind Singh Subject: [PATCH v3 1/3] dt: bindings: add missing dt properties for WCN3990 wifi node Date: Wed, 10 Oct 2018 17:22:54 +0530 Message-ID: <1539172376-19269-2-git-send-email-govinds@codeaurora.org> References: <1539172376-19269-1-git-send-email-govinds@codeaurora.org> Return-path: In-Reply-To: <1539172376-19269-1-git-send-email-govinds-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Govind Singh List-Id: devicetree@vger.kernel.org Add missing optional properties in WCN3990 wifi node. Signed-off-by: Govind Singh --- .../bindings/net/wireless/qcom,ath10k.txt | 28 ++++++++++++++++------ 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 7fd4e8c..f831bb1 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -37,12 +37,20 @@ Optional properties: - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc". -- interrupts: List of interrupt lines. Must contain an entry - for each entry in the interrupt-names property. + "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and + "cxo_ref_clk_pin", "smmu_aggre2_noc_clk" for "qcom,wcn3990-wifi" + compatible target. +- interrupts: reference to the list of 17 interrupt no's for "qcom,ipq4019-wifi" + compatible target. + reference to the list of 12 interrupt no's for "qcom,wcn3990-wifi" + compatible target. + Must contain interrupt-names property per entry for + "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. + - interrupt-names: Must include the entries for MSI interrupt names ("msi0" to "msi15") and legacy interrupt - name ("legacy"), + name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" + compatible targets. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. @@ -55,7 +63,8 @@ Optional properties: - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. - -supply: handle to the regulator device tree node - optional "supply-name" is "vdd-0.8-cx-mx". + optional "supply-name" are "vdd-0.8-cx-mx", + "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". Example (to supply the calibration data alone): @@ -133,8 +142,10 @@ wifi@18000000 { compatible = "qcom,wcn3990-wifi"; reg = <0x18800000 0x800000>; reg-names = "membase"; - clocks = <&clock_gcc clk_aggre2_noc_clk>; - clock-names = "smmu_aggre2_noc_clk" + clocks = <&clock_gcc clk_aggre2_noc_clk>, + <&clock_gcc clk_rf_clk2_pin>; + clock-names = "smmu_aggre2_noc_clk", + "cxo_ref_clk_pin"; interrupts = <0 130 0 /* CE0 */ >, <0 131 0 /* CE1 */ >, @@ -149,4 +160,7 @@ wifi@18000000 { <0 140 0 /* CE10 */ >, <0 141 0 /* CE11 */ >; vdd-0.8-cx-mx-supply = <&pm8998_l5>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project