[PATCH fbdev-for-next 2/2] video: ssd1307fb: Add support for the reset-active-low property

["Vokáč Michal" <Michal.Vokac@ysoft.com>]

The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that DTS authors are forced to
define the reset-gpios property with GPIO_ACTIVE_HIGH to make the reset
work.

Add the reset-active-low property so the signal is inverted once again
and the GPIO_ACTIVE_LOW work as expected.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
 drivers/video/fbdev/ssd1307fb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index e7ae135..790f1c4 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -608,6 +608,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	struct fb_deferred_io *ssd1307fb_defio;
 	u32 vmem_size;
 	struct ssd1307fb_par *par;
+	bool reset_active_low;
 	u8 *vmem;
 	int ret;
 
@@ -671,6 +672,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
 	par->com_seq = of_property_read_bool(node, "solomon,com-seq");
 	par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
 	par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
+	reset_active_low = of_property_read_bool(node, "reset-active-low");
 
 	par->contrast = 127;
 	par->vcomh = par->device_info->default_vcomh;
@@ -728,9 +730,9 @@ static int ssd1307fb_probe(struct i2c_client *client,
 
 	if (par->reset) {
 		/* Reset the screen */
-		gpiod_set_value_cansleep(par->reset, 0);
+		gpiod_set_value_cansleep(par->reset, reset_active_low);
 		udelay(4);
-		gpiod_set_value_cansleep(par->reset, 1);
+		gpiod_set_value_cansleep(par->reset, !reset_active_low);
 		udelay(4);
 	}
 
-- 
2.1.4