Re: [PATCH 1/4] Input: egalax_ts - clean up capability initialization

[Lucas Stach <l.stach@pengutronix.de>]

Hi all,

we can drop this whole series. I realized that all I need is already
implemented in the EXC3000 driver.

Regards,
Lucas

Am Donnerstag, den 20.09.2018, 16:22 +0200 schrieb Lucas Stach:
> Just provide the proper flags to input_mt_init_slots(), which will
> so the right thing and set the proper capability bits.
> 
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/input/touchscreen/egalax_ts.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
> index 80e69bb8283e..5e7a60089c3d 100644
> --- a/drivers/input/touchscreen/egalax_ts.c
> +++ b/drivers/input/touchscreen/egalax_ts.c
> @@ -199,17 +199,12 @@ static int egalax_ts_probe(struct i2c_client *client,
> >  	input_dev->name = "EETI eGalax Touch Screen";
> >  	input_dev->id.bustype = BUS_I2C;
>  
> > -	__set_bit(EV_ABS, input_dev->evbit);
> > -	__set_bit(EV_KEY, input_dev->evbit);
> > -	__set_bit(BTN_TOUCH, input_dev->keybit);
> -
> > -	input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
> > -	input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
> >  	input_set_abs_params(input_dev,
> >  			     ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
> >  	input_set_abs_params(input_dev,
> >  			     ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
> > -	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
> > +	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS,
> > +			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
>  
> >  	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> >  					  egalax_ts_interrupt,