From: Keerthy <j-keerthy@ti.com>
To: tony@atomide.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
d-gerlach@ti.com, t-kristo@ti.com, j-keerthy@ti.com
Subject: [PATCH 2/6] ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
Date: Wed, 7 Nov 2018 10:34:16 +0530 [thread overview]
Message-ID: <1541567060-5671-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1541567060-5671-1-git-send-email-j-keerthy@ti.com>
From: Dave Gerlach <d-gerlach@ti.com>
There are several pins on this EVM that are not in use but they can
still draw power if misconfigured. Create a pinctrl entry for these pins
and configure each one for optimal power savings.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[t-kristo@ti.com: converted to use AM4372_IOPAD macro]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 50 ++++++++++++++++++++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d119f2a..ae6b24e 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -162,7 +162,7 @@
&am43xx_pinmux {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default>;
+ pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins>;
pinctrl-1 = <&wlan_pins_sleep>;
ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
@@ -532,6 +532,54 @@
>;
};
+ unused_pins: unused_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+ AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
+ AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
+ AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
};
&uart0 {
--
1.9.1
next prev parent reply other threads:[~2018-11-07 5:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-07 5:04 [PATCH 0/6] ARM: dts: am437x-gp-evm: Add pinctrl nodes Keerthy
2018-11-07 5:04 ` [PATCH 1/6] ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin Keerthy
2018-11-07 5:04 ` Keerthy [this message]
2018-11-07 5:04 ` [PATCH 3/6] ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins Keerthy
2018-11-07 5:04 ` [PATCH 4/6] ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states Keerthy
2018-11-07 5:04 ` [PATCH 5/6] ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake Keerthy
2018-11-07 5:04 ` [PATCH 6/6] ARM: dts: am437x-gp-evm: Add sleep state for beeper pins Keerthy
2018-11-19 18:33 ` [PATCH 0/6] ARM: dts: am437x-gp-evm: Add pinctrl nodes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541567060-5671-3-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).