From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Keerthy Subject: [PATCH 5/6] ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake Date: Wed, 7 Nov 2018 10:34:19 +0530 Message-ID: <1541567060-5671-6-git-send-email-j-keerthy@ti.com> In-Reply-To: <1541567060-5671-1-git-send-email-j-keerthy@ti.com> References: <1541567060-5671-1-git-send-email-j-keerthy@ti.com> MIME-Version: 1.0 Content-Type: text/plain To: tony@atomide.com Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, d-gerlach@ti.com, t-kristo@ti.com, j-keerthy@ti.com List-ID: From: Dave Gerlach Add pinctrl settings so that gpio0 wake from suspend will be supported using buttons SW4 and SW7. Also, add pinctrl configuration for 0x954, spi0_d0, which is an unused pin brought out to a header on the board that in it's default state also connects to the gpio used for wakeup, gpio0_3, which affects the state of the pin and prevents a working wakeup unless we set the mux to a different state. Signed-off-by: Dave Gerlach Signed-off-by: Keerthy --- arch/arm/boot/dts/am437x-gp-evm.dts | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index e52b013..0127d11 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -67,7 +67,13 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&matrix_keypad_default>; + pinctrl-1 = <&matrix_keypad_sleep>; + + linux,wakeup; + + row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ @@ -601,6 +607,24 @@ AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; + + matrix_keypad_default: matrix_keypad_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + matrix_keypad_sleep: matrix_keypad_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; }; &uart0 { -- 1.9.1