From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frieder Schrempf Subject: [PATCH v4 04/10] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties Date: Wed, 7 Nov 2018 15:43:21 +0100 Message-ID: <1541601809-16950-5-git-send-email-frieder.schrempf@kontron.de> References: <1541601809-16950-1-git-send-email-frieder.schrempf@kontron.de> Return-path: In-Reply-To: <1541601809-16950-1-git-send-email-frieder.schrempf@kontron.de> Sender: linux-kernel-owner@vger.kernel.org To: linux-mtd@lists.infradead.org, boris.brezillon@bootlin.com, linux-spi@vger.kernel.org Cc: dwmw2@infradead.org, computersforpeace@gmail.com, marek.vasut@gmail.com, richard@nod.at, miquel.raynal@bootlin.com, broonie@kernel.org, david.wolfe@nxp.com, fabio.estevam@nxp.com, prabhakar.kushwaha@nxp.com, yogeshnarayan.gaur@nxp.com, han.xu@nxp.com, shawnguo@kernel.org, Frieder Schrempf , Sascha Hauer , Pengutronix Kernel Team , NXP Linux Team , Rob Herring , Mark Rutland , Li Yang , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org From: Frieder Schrempf The FSL QSPI driver was moved to the SPI framework and it now acts as a SPI controller. Therefore the subnodes need to set spi-[rx/tx]-bus-width = <4>, so quad mode is used just as before. Also the properties 'bus-num', 'fsl,spi-num-chipselects' and 'fsl,spi-flash-chipselects' were never read by the driver and can be removed. The 'reg' properties are adjusted to reflect the what bus and chipselect the flash is connected to, as the new driver needs this information. The property 'fsl,qspi-has-second-chip' is not needed anymore and will be removed after the old driver was disabled to avoid breaking ls1021a-moxa-uc-8410a.dts. Signed-off-by: Frieder Schrempf --- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 8 ++++++-- arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++++-- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 ++ arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 5 ++--- 4 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 9cc6ff2..9997156 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -132,13 +132,17 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: s25fl128s@2 { + reg = <2>; #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 6dd9beb..9acfda8 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -117,15 +117,19 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; - flash1: n25q256a@1 { + flash1: n25q256a@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; - reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <2>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a0723..c2c9a2a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -176,6 +176,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index d01f64b..6a83f30 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -203,9 +203,6 @@ }; &qspi { - bus-num = <0>; - fsl,spi-num-chipselects = <2>; - fsl,spi-flash-chipselects = <0>; fsl,qspi-has-second-chip; status = "okay"; @@ -214,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { -- 2.7.4