From mboxrd@z Thu Jan 1 00:00:00 1970 From: Neil Armstrong Subject: [PATCH 2/2] media: sony-cxd2880: add optional vcc regulator to bindings Date: Thu, 8 Nov 2018 13:50:10 +0100 Message-ID: <1541681410-8187-3-git-send-email-narmstrong@baylibre.com> References: <1541681410-8187-1-git-send-email-narmstrong@baylibre.com> Return-path: In-Reply-To: <1541681410-8187-1-git-send-email-narmstrong@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: Yasunari.Takiguchi@sony.com, devicetree@vger.kernel.org Cc: Neil Armstrong , mchehab@kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org This patchset adds an optional VCC regulator to the bindings of the Sony CXD2880 DVB-T2/T tuner + demodulator adapter. Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt index fc5aa26..98a72c0 100644 --- a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt +++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt @@ -5,6 +5,10 @@ Required properties: - reg: SPI chip select number for the device. - spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz). +Optional properties: +- vcc-supply: Optional phandle to the vcc regulator to power the adapter, + as described in the file ../regulator/regulator.txt + Example: cxd2880@0 { -- 2.7.4