[PATCH 9/9] dt-bindings: fpga: Add binding doc for the afi config driver

[Jolly Shah <jolly.shah@xilinx.com>]

Add the binding document for the afi config driver.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
 .../devicetree/bindings/fpga/xlnx,afi-fpga.txt     | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt
new file mode 100644
index 0000000..9006e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt
@@ -0,0 +1,67 @@
+Xilinx ZynqMp AFI interface Manager
+
+The Zynq UltraScale+ MPSoC Processing System core provides access from PL
+masters to PS internal peripherals, and memory through AXI FIFO interface
+(AFI) interfaces.
+
+Required properties:
+-compatible:		Should contain "xlnx,afi-fpga"
+-config-afi:		Pairs of  <regid value >
+
+The possible values of regid and values are
+ regid:		Regids of the register to be written possible values
+		0- AFIFM0_RDCTRL
+		1- AFIFM0_WRCTRL
+		2- AFIFM1_RDCTRL
+		3- AFIFM1_WRCTRL
+		4- AFIFM2_RDCTRL
+		5- AFIFM2_WRCTRL
+		6- AFIFM3_RDCTRL
+		7- AFIFM3_WRCTRL
+		8- AFIFM4_RDCTRL
+		9- AFIFM4_WRCTRL
+		10- AFIFM5_RDCTRL
+		11- AFIFM5_WRCTRL
+		12- AFIFM6_RDCTRL
+		13- AFIFM6_WRCTRL
+		14- AFIFS
+		15- AFIFS_SS2
+- value:	Array of values to be written.
+		for FM0_RDCTRL(0) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM0_WRCTRL(1) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM1_RDCTRL(2) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM1_WRCTRL(3) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM2_RDCTRL(4) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM2_WRCTRL(5) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM3_RDCTRL(6) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM3_WRCTRL(7) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM4_RDCTRL(8) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM4_WRCTRL(9) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM5_RDCTRL(10) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM5_WRCTRL(11) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM6_RDCTRL(12) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for FM6_WRCTRL(13) the valid values-fabric width   2: 32-bit,1 : 64-bit ,0: 128-bit enabled
+		for AFI_FA(14)
+			dw_ss1_sel	bits (11:10)
+			dw_ss0_sel	bits (9:8)
+				0x0: 32-bit AXI data width),
+				0x1: 64-bit AXI data width,
+				0x2: 128-bit AXI data
+		All other bits are 0 write ignored.
+
+		for AFI_FA(15)  selects for ss2AXI data width valid values
+					0x000: 32-bit AXI data width),
+					0x100: 64-bit AXI data width,
+					0x200: 128-bit AXI data
+
+Example:
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+		afi0: afi0 {
+			compatible = "xlnx,afi-fpga";
+			config-afi = <0 2>, <1 1>, <2 1>;
+		};
+	};
+};
-- 
2.7.4