From: Todor Tomov <todor.tomov@linaro.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, vivek.gautam@codeaurora.org,
Todor Tomov <todor.tomov@linaro.org>
Subject: [PATCH 2/2] arm64: dts: qcom: msm8996: Add CAMSS support
Date: Mon, 19 Nov 2018 11:25:37 +0200 [thread overview]
Message-ID: <1542619537-24038-2-git-send-email-todor.tomov@linaro.org> (raw)
In-Reply-To: <1542619537-24038-1-git-send-email-todor.tomov@linaro.org>
Add a node for the Camera Subsystem present on the Qualcomm
MSM8996 SoC.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 135 ++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a4d087e5..8585c61 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -967,6 +967,141 @@
status = "ok";
};
+ camss: camss@a00000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0xa34000 0x1000>,
+ <0xa00030 0x4>,
+ <0xa35000 0x1000>,
+ <0xa00038 0x4>,
+ <0xa36000 0x1000>,
+ <0xa00040 0x4>,
+ <0xa30000 0x100>,
+ <0xa30400 0x100>,
+ <0xa30800 0x100>,
+ <0xa30c00 0x100>,
+ <0xa31000 0x500>,
+ <0xa00020 0x10>,
+ <0xa10000 0x1000>,
+ <0xa14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 80 0>,
+ <GIC_SPI 296 0>,
+ <GIC_SPI 297 0>,
+ <GIC_SPI 298 0>,
+ <GIC_SPI 299 0>,
+ <GIC_SPI 309 0>,
+ <GIC_SPI 314 0>,
+ <GIC_SPI 315 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ vdda-supply = <&pm8994_l2>;
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
agnoc@0 {
power-domains = <&gcc AGGRE0_NOC_GDSC>;
compatible = "simple-pm-bus";
--
2.7.4
next prev parent reply other threads:[~2018-11-19 9:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 9:25 [PATCH 1/2] arm64: dts: qcom: msm8996: Add VFE SMMU node Todor Tomov
2018-11-19 9:25 ` Todor Tomov [this message]
2018-11-19 11:08 ` Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542619537-24038-2-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).