From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: imx27: Fix memory node duplicaton
Date: Mon, 26 Nov 2018 10:40:53 -0200 [thread overview]
Message-ID: <1543236054-10450-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1543236054-10450-1-git-send-email-festevam@gmail.com>
Boards based on imx27 have duplicate memory nodes:
- One coming from the board dts file: memory@
- One coming from the imx27.dtsi file.
Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/boot/dts/imx27-apf27.dts | 1 +
arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi | 1 +
arch/arm/boot/dts/imx27-pdk.dts | 1 +
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi | 1 +
arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 1 +
arch/arm/boot/dts/imx27.dtsi | 2 --
6 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index 3eddd80..f635d5c 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -20,6 +20,7 @@
compatible = "armadeus,imx27-apf27", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x04000000>;
};
};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index 9c455dc..c85f9d0 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -17,6 +17,7 @@
compatible = "eukrea,cpuimx27", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x04000000>;
};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index f9a882d..35123b7 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -10,6 +10,7 @@
compatible = "fsl,imx27-pdk", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
index cbad7c8..b0b4f7c 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -18,6 +18,7 @@
compatible = "phytec,imx27-pca100", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>; /* 128MB */
};
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index ec466b4..0935e14 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -17,6 +17,7 @@
compatible = "phytec,imx27-pcm038", "fsl,imx27";
memory@a0000000 {
+ device_type = "memory";
reg = <0xa0000000 0x08000000>;
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 151b0eb..26ff5d4 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -16,10 +16,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
--
2.7.4
next prev parent reply other threads:[~2018-11-26 12:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-26 12:40 [PATCH 1/3] ARM: dts: imx1: Fix memory node duplicaton Fabio Estevam
2018-11-26 12:40 ` Fabio Estevam [this message]
2018-11-26 12:40 ` [PATCH 3/3] ARM: dts: imx25: " Fabio Estevam
2018-11-26 13:13 ` [PATCH 1/3] ARM: dts: imx1: " Vladimir Zapolskiy
2018-11-28 8:53 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1543236054-10450-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).