From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH 2/4] phy: ti: Don't depend on OMAP_OCP2SCP Date: Wed, 5 Dec 2018 17:03:24 +0200 Message-ID: <1544022206-2300-3-git-send-email-rogerq@ti.com> References: <1544022206-2300-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1544022206-2300-1-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: kishon@ti.com Cc: robh+dt@kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-omap@vger.kernel.org, Roger Quadros List-Id: devicetree@vger.kernel.org TI_PIPE3 and OMAP_USB2 don't depend on OMAP_OCP2SCP for build. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori --- drivers/phy/ti/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig index 2050356..4fdbe06 100644 --- a/drivers/phy/ti/Kconfig +++ b/drivers/phy/ti/Kconfig @@ -38,7 +38,6 @@ config OMAP_USB2 select GENERIC_PHY select USB_PHY select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. @@ -50,7 +49,6 @@ config TI_PIPE3 depends on ARCH_OMAP2PLUS || COMPILE_TEST select GENERIC_PHY select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP help Enable this to support the PIPE3 PHY that is part of TI SOCs. This driver takes care of all the PHY functionality apart from comparator. -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki