From: Pawel Laszczak <pawell@cadence.com>
To: devicetree@vger.kernel.org
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
balbi@kernel.org, rogerq@ti.com, linux-kernel@vger.kernel.org,
adouglas@cadence.com, jbergsagel@ti.com, nsekhar@ti.com,
nm@ti.com, sureshp@cadence.com, peter.chen@nxp.com,
pjez@cadence.com, kurahul@cadence.com,
Pawel Laszczak <pawell@cadence.com>
Subject: [PATCH v1 0/2] Introduced new Cadence USBSS DRD Driver.
Date: Mon, 10 Dec 2018 12:39:13 +0000 [thread overview]
Message-ID: <1544445555-17325-1-git-send-email-pawell@cadence.com> (raw)
This patch set introduce new Cadence USBSS DRD driver
to linux kernel.
The Cadence USBSS DRD Driver s a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
The current driver has been validated with
FPGA burned. We have support for PCIe
bus, which is used on FPGA prototyping.
The host site of USBSS controller is compliance
with XHCI specification, so it works with
standard XHCI linux driver.
---
Pawel Laszczak (2):
dt-bindings: add binding for USBSS-DRD controller.
usb:cdns3 Add Cadence USB3 DRD Driver
.../devicetree/bindings/usb/cdns3-usb.txt | 31 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/cdns3/Kconfig | 44 +
drivers/usb/cdns3/Makefile | 16 +
drivers/usb/cdns3/cdns3-pci-wrap.c | 157 ++
drivers/usb/cdns3/core.c | 451 +++++
drivers/usb/cdns3/core.h | 108 +
drivers/usb/cdns3/debug.h | 346 ++++
drivers/usb/cdns3/debugfs.c | 168 ++
drivers/usb/cdns3/drd.c | 315 +++
drivers/usb/cdns3/drd.h | 129 ++
drivers/usb/cdns3/ep0.c | 864 ++++++++
drivers/usb/cdns3/gadget-export.h | 28 +
drivers/usb/cdns3/gadget.c | 1802 +++++++++++++++++
drivers/usb/cdns3/gadget.h | 1177 +++++++++++
drivers/usb/cdns3/host-export.h | 28 +
drivers/usb/cdns3/host.c | 74 +
drivers/usb/cdns3/trace.c | 11 +
drivers/usb/cdns3/trace.h | 343 ++++
20 files changed, 6096 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/cdns3-usb.txt
create mode 100644 drivers/usb/cdns3/Kconfig
create mode 100644 drivers/usb/cdns3/Makefile
create mode 100644 drivers/usb/cdns3/cdns3-pci-wrap.c
create mode 100644 drivers/usb/cdns3/core.c
create mode 100644 drivers/usb/cdns3/core.h
create mode 100644 drivers/usb/cdns3/debug.h
create mode 100644 drivers/usb/cdns3/debugfs.c
create mode 100644 drivers/usb/cdns3/drd.c
create mode 100644 drivers/usb/cdns3/drd.h
create mode 100644 drivers/usb/cdns3/ep0.c
create mode 100644 drivers/usb/cdns3/gadget-export.h
create mode 100644 drivers/usb/cdns3/gadget.c
create mode 100644 drivers/usb/cdns3/gadget.h
create mode 100644 drivers/usb/cdns3/host-export.h
create mode 100644 drivers/usb/cdns3/host.c
create mode 100644 drivers/usb/cdns3/trace.c
create mode 100644 drivers/usb/cdns3/trace.h
--
2.17.1
next reply other threads:[~2018-12-10 12:39 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 12:39 Pawel Laszczak [this message]
2018-12-10 12:39 ` [PATCH v1 1/2] dt-bindings: add binding for USBSS-DRD controller Pawel Laszczak
2018-12-11 10:16 ` Roger Quadros
2018-12-13 9:20 ` Peter Chen
2018-12-13 9:25 ` Pawel Laszczak
2018-12-20 20:01 ` Rob Herring
2018-12-22 22:24 ` Pawel Laszczak
2018-12-27 21:01 ` Rob Herring
2018-12-31 5:35 ` Pawel Laszczak
2018-12-10 12:39 ` [PATCH v1 2/2] usb:cdns3 Add Cadence USB3 DRD Driver Pawel Laszczak
2018-12-11 9:39 ` Roger Quadros
2018-12-11 10:01 ` Pawel Laszczak
2018-12-11 12:15 ` Felipe Balbi
2018-12-11 11:46 ` Felipe Balbi
2018-12-11 12:14 ` Felipe Balbi
2018-12-11 19:04 ` Pawel Laszczak
2018-12-12 2:04 ` Peter Chen
2018-12-12 6:55 ` Felipe Balbi
2018-12-12 7:38 ` Peter Chen
2018-12-12 8:34 ` Felipe Balbi
2018-12-12 9:24 ` Peter Chen
2018-12-12 15:53 ` Bin Liu
2018-12-13 1:21 ` Peter Chen
2018-12-12 6:52 ` Felipe Balbi
2018-12-14 3:46 ` Kishon Vijay Abraham I
2018-12-17 5:46 ` Pawel Laszczak
2018-12-17 11:25 ` Pawel Laszczak
2018-12-17 11:34 ` Felipe Balbi
2018-12-17 11:51 ` Pawel Laszczak
2018-12-17 11:56 ` Felipe Balbi
2018-12-13 9:35 ` Peter Chen
2018-12-16 13:01 ` Pawel Laszczak
2018-12-14 22:56 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544445555-17325-1-git-send-email-pawell@cadence.com \
--to=pawell@cadence.com \
--cc=adouglas@cadence.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbergsagel@ti.com \
--cc=kurahul@cadence.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.chen@nxp.com \
--cc=pjez@cadence.com \
--cc=rogerq@ti.com \
--cc=sureshp@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).