From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bhagavathi Perumal S Subject: [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example Date: Tue, 11 Dec 2018 21:43:22 +0530 Message-ID: <1544544804-4039-2-git-send-email-bperumal@codeaurora.org> References: <1544544804-4039-1-git-send-email-bperumal@codeaurora.org> Return-path: In-Reply-To: <1544544804-4039-1-git-send-email-bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Bhagavathi Perumal S List-Id: devicetree@vger.kernel.org In qcom,ath10k documentation, ath10k is used as node name in the example of pci based device. Normally, node name should be class of device and not the model name, so fix it to node name "wifi". And remove the property device_type pci since only pci bridges should have this property. Signed-off-by: Bhagavathi Perumal S --- Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 2196d1a..ef60f25 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -74,9 +74,8 @@ pci { #address-cells = <3>; device_type = "pci"; - ath10k@0,0 { + wifi@0,0 { reg = <0 0 0 0 0>; - device_type = "pci"; qcom,ath10k-calibration-data = [ 01 02 03 ... ]; }; }; -- 1.9.1