* [PATCH] arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD
@ 2018-12-14 11:01 Loic Poulain
0 siblings, 0 replies; only message in thread
From: Loic Poulain @ 2018-12-14 11:01 UTC (permalink / raw)
To: andy.gross, david.brown, robh+dt
Cc: linux-arm-msm, bjorn.andersson, devicetree, migusa, Loic Poulain
In the same way as for msm8974-hammerhead, l11 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).
Tested on Dragonboard-410c and DART-SD410 boards.
Fixes: 4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support)
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 4c3dda5..653344d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -580,6 +580,8 @@
l11 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
};
l12 {
--
2.7.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-12-14 11:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-14 11:01 [PATCH] arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD Loic Poulain
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).