From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sowjanya Komatineni Subject: [PATCH V2 1/3] dt-bindings: mmc: tegra: Add pinctrl for pad drive strength config Date: Wed, 19 Dec 2018 14:55:51 -0800 Message-ID: <1545260153-11338-1-git-send-email-skomatineni@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, mark.rutland@arm.com, mperttunen@nvidia.com, thierry.reding@gmail.com, jonathanh@nvidia.com, adrian.hunter@intel.com, ulf.hansson@linaro.org, pchandru@nvidia.com Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, Sowjanya Komatineni List-Id: devicetree@vger.kernel.org Add pinctrl for 3V3 and 1V8 pad drive strength configuration for Tegra210 sdmmc which has pad configuration registers in the pinmux reigster domain. Signed-off-by: Sowjanya Komatineni --- Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 32b4b4e41923..2cecdc71d94c 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -39,12 +39,16 @@ sdhci@c8000200 { bus-width = <8>; }; -Optional properties for Tegra210 and Tegra186: +Optional properties for Tegra210, Tegra186 and Tegra194: - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8" for controllers supporting multiple voltage levels. The order of names should correspond to the pin configuration states in pinctrl-0 and pinctrl-1. +- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for + Tegra210 where pad config registers are in the pinmux register domain + for pull-up-strength and pull-down-strength values configuration when + using pads at 3V3 and 1V8 levels. - nvidia,only-1-8-v : The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - nvidia,pad-autocal-pull-up-offset-3v3, -- 2.7.4