From mboxrd@z Thu Jan 1 00:00:00 1970 From: Loys Ollivier Subject: [PATCH 2/4] dt-bindings: gnss: add gtop binding Date: Fri, 28 Dec 2018 11:50:33 +0100 Message-ID: <1545994235-8309-3-git-send-email-lollivier@baylibre.com> References: <1545994235-8309-1-git-send-email-lollivier@baylibre.com> Return-path: In-Reply-To: <1545994235-8309-1-git-send-email-lollivier@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: devicetree@vger.kernel.org, Johan Hovold Cc: Loys Ollivier , Rob Herring , Mark Rutland , linux-kernel@vger.kernel.org, Kevin Hilman , linux-amlogic@lists.infradead.org List-Id: devicetree@vger.kernel.org Add binding for GlobalTop GNSS receivers. Signed-off-by: Loys Ollivier --- Documentation/devicetree/bindings/gnss/gtop.txt | 33 +++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/gnss/gtop.txt diff --git a/Documentation/devicetree/bindings/gnss/gtop.txt b/Documentation/devicetree/bindings/gnss/gtop.txt new file mode 100644 index 000000000000..24c86703aa46 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/gtop.txt @@ -0,0 +1,33 @@ +GlobalTop GNSS Receiver DT binding + +The GlobalTop GNSS receivers uses UART interfaces. + +Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic +properties. + +Required properties: + +- compatible : Must be + + "globaltop,pa6h" + +- vcc-supply : Main voltage regulator + +Optional properties: + +- timepulse-gpios : Time pulse GPIO +- v-bckp-supply : Backup voltage regulator + +Example: + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; + + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + current-speed = <9600>; + }; +}; -- 2.7.4