devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	chunfeng.yun@mediatek.com, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Min Guo <min.guo@mediatek.com>
Subject: [PATCH v2 3/4] usb: musb: Extract set toggle as a separate interface
Date: Tue, 15 Jan 2019 09:43:45 +0800	[thread overview]
Message-ID: <1547516626-5084-4-git-send-email-min.guo@mediatek.com> (raw)
In-Reply-To: <1547516626-5084-1-git-send-email-min.guo@mediatek.com>

From: Min Guo <min.guo@mediatek.com>

Add a common interface for set data toggle

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
 drivers/usb/musb/musb_host.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b59ce9a..16d0ba4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -306,6 +306,25 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
 	usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
 }
 
+static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
+	struct urb *urb)
+{
+	u16 csr = 0;
+	u16 toggle = 0;
+
+	toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
+
+	if (is_in)
+		csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
+				| MUSB_RXCSR_H_DATATOGGLE) : 0;
+	else
+		csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
+				| MUSB_TXCSR_H_DATATOGGLE)
+				: MUSB_TXCSR_CLRDATATOG;
+
+	return csr;
+}
+
 /*
  * Advance this hardware endpoint's queue, completing the specified URB and
  * advancing to either the next URB queued to that qh, or else invalidating
@@ -772,13 +791,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (!hw_ep->tx_double_buffered) {
-				if (usb_gettoggle(urb->dev, qh->epnum, 1))
-					csr |= MUSB_TXCSR_H_WR_DATATOGGLE
-						| MUSB_TXCSR_H_DATATOGGLE;
-				else
-					csr |= MUSB_TXCSR_CLRDATATOG;
-			}
+			if (!hw_ep->tx_double_buffered)
+				csr |= musb_set_toggle(qh, !is_out, urb);
 
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
@@ -860,17 +874,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 
 	/* IN/receive */
 	} else {
-		u16	csr;
+		u16 csr = 0;
 
 		if (hw_ep->rx_reinit) {
 			musb_rx_reinit(musb, qh, epnum);
+			csr |= musb_set_toggle(qh, !is_out, urb);
 
-			/* init new state: toggle and NYET, maybe DMA later */
-			if (usb_gettoggle(urb->dev, qh->epnum, 0))
-				csr = MUSB_RXCSR_H_WR_DATATOGGLE
-					| MUSB_RXCSR_H_DATATOGGLE;
-			else
-				csr = 0;
 			if (qh->type == USB_ENDPOINT_XFER_INT)
 				csr |= MUSB_RXCSR_DISNYET;
 
-- 
1.9.1

  parent reply	other threads:[~2019-01-15  1:43 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-15  1:43 [PATCH v2 0/4] Add MediaTek MUSB Controller Driver min.guo
2019-01-15  1:43 ` [PATCH v2 1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller min.guo
2019-01-15  1:43 ` [PATCH v2 2/4] arm: dts: mt2701: Add usb2 device nodes min.guo
2019-01-15  1:43 ` min.guo [this message]
2019-01-15 15:19   ` [PATCH v2 3/4] usb: musb: Extract set toggle as a separate interface Matthias Brugger
2019-01-15 20:40     ` Bin Liu
2019-01-16  2:43       ` Min Guo
2019-01-16  2:44     ` Min Guo
2019-01-15  1:43 ` [PATCH v2 4/4] usb: musb: Add support for MediaTek musb controller min.guo
2019-01-15 20:38   ` Bin Liu
2019-01-16  2:43     ` Min Guo
2019-01-16  9:39     ` Min Guo
2019-01-16 13:59       ` Bin Liu
2019-01-17  3:34         ` Min Guo
2019-01-15  5:18 ` [SPAM][PATCH v2 0/4] Add MediaTek MUSB Controller Driver Ryder Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547516626-5084-4-git-send-email-min.guo@mediatek.com \
    --to=min.guo@mediatek.com \
    --cc=b-liu@ti.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).