From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryder Lee Subject: Re: [PATCH v1 3/3] mtd: spi-nor: mtk-quadspi: rename config to a common one Date: Tue, 15 Jan 2019 15:57:55 +0800 Message-ID: <1547539075.18705.3.camel@mtkswgap22> References: <67e650ca4fcaaddbbc98bf4e1cbe04647c990dc3.1547442452.git.ryder.lee@mediatek.com> <45dc2817e7f4baf5113de247b1a2cb30bf252d93.1547442452.git.ryder.lee@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Tudor.Ambarus@microchip.com Cc: marek.vasut@gmail.com, computersforpeace@gmail.com, boris.brezillon@bootlin.com, robh+dt@kernel.org, weijie.gao@mediatek.com, linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org List-Id: devicetree@vger.kernel.org On Tue, 2019-01-15 at 07:34 +0000, Tudor.Ambarus@microchip.com wrote: > Hi, Ryder, > > On 01/14/2019 07:12 AM, Ryder Lee wrote: > > The quadspi is a generic communication interface which could be shared > > with other MediaTek SoCs. Hence rename it to a common one. > > > > Signed-off-by: Ryder Lee > > --- > > Changes since v1: rebase to v5.0-rc1. > > The patch doesn't apply on v5.0-rc1 or rc2. > > --- > > drivers/mtd/spi-nor/Kconfig | 16 ++++++++-------- > > drivers/mtd/spi-nor/Makefile | 2 +- > > 2 files changed, 9 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig > > index b433e5f..99d9d53 100644 > > --- a/drivers/mtd/spi-nor/Kconfig > > +++ b/drivers/mtd/spi-nor/Kconfig > > @@ -7,14 +7,6 @@ menuconfig MTD_SPI_NOR > > > > if MTD_SPI_NOR > > > > -config MTD_MT81xx_NOR > > - tristate "Mediatek MT81xx SPI NOR flash controller" > > - depends on HAS_IOMEM > > - help > > - This enables access to SPI NOR flash, using MT81xx SPI NOR flash > > - controller. This controller does not support generic SPI BUS, it only > > - supports SPI NOR Flash. > > - > > config MTD_SPI_NOR_USE_4K_SECTORS > > bool "Use small 4096 B erase sectors" > > default y > > @@ -68,6 +60,14 @@ config SPI_NXP_SPIFI > > Flash. Enable this option if you have a device with a SPIFI > > controller and want to access the Flash as a mtd device. > > > > +config SPI_MTK_QUADSPI > > Since you are moving the config into the file, would you mind to put your config > in an alphabetical order? > > Thanks, > ta Okay, I will send a new one to fix them. Thanks, Ryder > > + tristate "MediaTek Quad SPI controller" > > + depends on HAS_IOMEM > > + help > > + This enables support for the Quad SPI controller in master mode. > > + This controller does not support generic SPI. It only supports > > + SPI NOR. > > + > > config SPI_INTEL_SPI > > tristate > > > > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile > > index 2adedbe..189a15c 100644 > > --- a/drivers/mtd/spi-nor/Makefile > > +++ b/drivers/mtd/spi-nor/Makefile > > @@ -3,7 +3,7 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o > > obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o > > obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o > > obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o > > -obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o > > +obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o > > obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o > > obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o > > obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o > >