devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	David Brown <david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Andy Gross <andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v8] arm64: dts: sdm845: Add gpu and gmu device nodes
Date: Wed, 16 Jan 2019 11:03:29 -0700	[thread overview]
Message-ID: <1547661809-31184-1-git-send-email-jcrouse@codeaurora.org> (raw)

Add the nodes to describe the Adreno GPU and GMU devices for sdm845.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
---
This has the following dependencies:

[v11,1/9] dt-bindings: opp: Introduce opp-level bindings
https://patchwork.kernel.org/patch/10755199/

And the following patches already in Rob's msm-next:
msm-next:d1c9cadea6f7 ("drm/msm/gpu: Remove hardcoded interrupt name")
msm-next:b08b92546807 ("drm/msm: drop interrupt-names")
msm-next:24937c540917 ("dt-bindings: drm/msm/a6xx: Document GMU and update GPU bindings")

And finally drm/msm: Fix A6XX support for opp-level
https://patchwork.freedesktop.org/patch/276756/

Which is not merged because it too depends on Rajendra's stack.

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 121 +++++++++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f07c4ca..90766fc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1618,6 +1618,127 @@
 			};
 		};
 
+
+		gpu@5000000 {
+			compatible = "qcom,adreno-630.2", "qcom,adreno";
+			#stream-id-cells = <16>;
+
+			reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-710000000 {
+					opp-hz = /bits/ 64 <710000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-596000000 {
+					opp-hz = /bits/ 64 <596000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-520000000 {
+					opp-hz = /bits/ 64 <520000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-414000000 {
+					opp-hz = /bits/ 64 <414000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-342000000 {
+					opp-hz = /bits/ 64 <342000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+			reg = <0x5040000 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+			reg = <0x506a000 0x30000>,
+				<0xb280000 0x10000>,
+				<0xb480000 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				<&gpucc GPU_CC_CXO_CLK>,
+				<&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sdm845-dispcc";
 			reg = <0xaf00000 0x10000>;
-- 
2.7.4

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

             reply	other threads:[~2019-01-16 18:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-16 18:03 Jordan Crouse [this message]
     [not found] ` <1547661809-31184-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2019-01-16 19:13   ` [PATCH v8] arm64: dts: sdm845: Add gpu and gmu device nodes Doug Anderson
2019-01-17 23:15   ` Doug Anderson
2019-01-21  1:49   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547661809-31184-1-git-send-email-jcrouse@codeaurora.org \
    --to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).