From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH v4 1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller Date: Mon, 21 Jan 2019 20:22:26 +0800 Message-ID: <1548073351-13739-2-git-send-email-min.guo@mediatek.com> References: <1548073351-13739-1-git-send-email-min.guo@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1548073351-13739-1-git-send-email-min.guo@mediatek.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Bin Liu , Rob Herring Cc: Mark Rutland , devicetree@vger.kernel.org, hdegoede@redhat.com, tony@atomide.com, Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Matthias Brugger , Alan Stern , Min Guo , chunfeng.yun@mediatek.com, linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org From: Min Guo This adds support for MediaTek musb controller in host, peripheral and otg mode. Signed-off-by: Min Guo --- changes in v4: suggested by Sergei: 1. String alignment changes in v3: 1. no changes changes in v2: suggested by Bin: 1. Modify DRC to DRD suggested by Rob: 2. Drop the "-musb" in compatible 3. Remove phy-names 4. Add space after comma in clock-names --- .../devicetree/bindings/usb/mediatek,musb.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt new file mode 100644 index 0000000..4305770 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt @@ -0,0 +1,43 @@ +MediaTek musb DRD/OTG controller +------------------------------------------- + +Required properties: + - compatible : should be "mediatek,mtk-musb" + - reg : specifies physical base address and size of + the registers + - interrupts : interrupt used by musb controller + - interrupt-names : must be "mc" + - phys : PHY specifier for the OTG phy + - dr_mode : should be one of "host", "peripheral" or "otg", + refer to usb/generic.txt + - clocks : a list of phandle + clock-specifier pairs, one for + each entry in clock-names + - clock-names : must contain "main", "mcu", "univpll" + for clocks of controller + +Optional properties: + - extcon : external connector for VBUS and ID pin changes detection, + needed when supports dual-role mode + - vbus-supply : reference to the VBUS regulator, needed when supports + dual-role mode + - power-domains : a phandle to USB power domain node to control USB's + MTCMOS + +Example: + +usb2: usb@11200000 { + compatible = "mediatek,mt2701-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = ; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + vbus-supply = <&usb_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; +}; -- 1.9.1