From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
chunfeng.yun@mediatek.com, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, tony@atomide.com,
hdegoede@redhat.com, Min Guo <min.guo@mediatek.com>
Subject: [PATCH v4 5/6] usb: musb: Add musb_clearb/w() interface
Date: Mon, 21 Jan 2019 20:22:30 +0800 [thread overview]
Message-ID: <1548073351-13739-6-git-send-email-min.guo@mediatek.com> (raw)
In-Reply-To: <1548073351-13739-1-git-send-email-min.guo@mediatek.com>
From: Min Guo <min.guo@mediatek.com>
Delete the const attribute of addr parameter in readb/w/l hooks, these
changes are for implementing clearing W1C registers.
Replace musb_readb/w with musb_clearb/w to clear the interrupt status.
Signed-off-by: Min Guo <min.guo@mediatek.com>
---
new patch based on v3:
---
drivers/usb/musb/musb_core.c | 32 +++++++++++++++++++++++---------
drivers/usb/musb/musb_core.h | 8 ++++++--
drivers/usb/musb/musb_io.h | 8 +++++---
drivers/usb/musb/musbhsdma.c | 3 +++
drivers/usb/musb/sunxi.c | 4 ++--
drivers/usb/musb/tusb6010.c | 2 +-
6 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2fe5225..5ef8848 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -246,7 +246,7 @@ static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
return 0x80 + (0x08 * epnum) + offset;
}
-static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
+static u8 musb_default_readb(void __iomem *addr, unsigned offset)
{
u8 data = __raw_readb(addr + offset);
@@ -260,7 +260,7 @@ static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data)
__raw_writeb(data, addr + offset);
}
-static u16 musb_default_readw(const void __iomem *addr, unsigned offset)
+static u16 musb_default_readw(void __iomem *addr, unsigned offset)
{
u16 data = __raw_readw(addr + offset);
@@ -396,19 +396,25 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
/*
* Old style IO functions
*/
-u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+u8 (*musb_readb)(void __iomem *addr, unsigned offset);
EXPORT_SYMBOL_GPL(musb_readb);
void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
EXPORT_SYMBOL_GPL(musb_writeb);
-u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearb);
+
+u16 (*musb_readw)(void __iomem *addr, unsigned offset);
EXPORT_SYMBOL_GPL(musb_readw);
void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
EXPORT_SYMBOL_GPL(musb_writew);
-u32 musb_readl(const void __iomem *addr, unsigned offset)
+u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearw);
+
+u32 musb_readl(void __iomem *addr, unsigned offset)
{
u32 data = __raw_readl(addr + offset);
@@ -1047,7 +1053,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
static void musb_disable_interrupts(struct musb *musb)
{
void __iomem *mbase = musb->mregs;
- u16 temp;
/* disable interrupts */
musb_writeb(mbase, MUSB_INTRUSBE, 0);
@@ -1057,9 +1062,9 @@ static void musb_disable_interrupts(struct musb *musb)
musb_writew(mbase, MUSB_INTRRXE, 0);
/* flush pending interrupts */
- temp = musb_readb(mbase, MUSB_INTRUSB);
- temp = musb_readw(mbase, MUSB_INTRTX);
- temp = musb_readw(mbase, MUSB_INTRRX);
+ musb_clearb(mbase, MUSB_INTRUSB);
+ musb_clearw(mbase, MUSB_INTRTX);
+ musb_clearw(mbase, MUSB_INTRRX);
}
static void musb_enable_interrupts(struct musb *musb)
@@ -2284,10 +2289,19 @@ static void musb_deassert_reset(struct work_struct *work)
musb_readb = musb->ops->readb;
if (musb->ops->writeb)
musb_writeb = musb->ops->writeb;
+ if (musb->ops->clearb)
+ musb_clearb = musb->ops->clearb;
+ else
+ musb_clearb = musb_readb;
+
if (musb->ops->readw)
musb_readw = musb->ops->readw;
if (musb->ops->writew)
musb_writew = musb->ops->writew;
+ if (musb->ops->clearw)
+ musb_clearw = musb->ops->clearw;
+ else
+ musb_clearw = musb_readw;
#ifndef CONFIG_MUSB_PIO_ONLY
if (!musb->ops->dma_init || !musb->ops->dma_exit) {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9f5a69c..0d9a35f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -120,8 +120,10 @@ enum musb_g_ep0_state {
* @fifo_offset: returns the fifo offset
* @readb: read 8 bits
* @writeb: write 8 bits
+ * @clearb: could be clear-on-readb or W1C
* @readw: read 16 bits
* @writew: write 16 bits
+ * @clearw: could be clear-on-readw or W1C
* @read_fifo: reads the fifo
* @write_fifo: writes to fifo
* @get_toggle: platform specific get toggle function
@@ -164,10 +166,12 @@ struct musb_platform_ops {
u16 fifo_mode;
u32 (*fifo_offset)(u8 epnum);
u32 (*busctl_offset)(u8 epnum, u16 offset);
- u8 (*readb)(const void __iomem *addr, unsigned offset);
+ u8 (*readb)(void __iomem *addr, unsigned offset);
void (*writeb)(void __iomem *addr, unsigned offset, u8 data);
- u16 (*readw)(const void __iomem *addr, unsigned offset);
+ u8 (*clearb)(void __iomem *addr, unsigned int offset);
+ u16 (*readw)(void __iomem *addr, unsigned offset);
void (*writew)(void __iomem *addr, unsigned offset, u16 data);
+ u16 (*clearw)(void __iomem *addr, unsigned int offset);
void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
u16 (*get_toggle)(struct musb_qh *qh, int is_out);
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 8179334..7200596 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -37,11 +37,13 @@ struct musb_io {
};
/* Do not add new entries here, add them the struct musb_io instead */
-extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_readb)(void __iomem *addr, unsigned offset);
extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
-extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+extern u16 (*musb_readw)(void __iomem *addr, unsigned offset);
extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
-extern u32 musb_readl(const void __iomem *addr, unsigned offset);
+extern u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+extern u32 musb_readl(void __iomem *addr, unsigned offset);
extern void musb_writel(void __iomem *addr, unsigned offset, u32 data);
#endif
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index b2394a7..7bf91cb 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -286,6 +286,9 @@ irqreturn_t dma_controller_irq(int irq, void *private_data)
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+ /* clear pending interrupts by manual */
+ musb_clearb(musb->mregs, MUSB_HSDMA_INTR);
+
if (!int_hsdma) {
musb_dbg(musb, "spurious DMA irq");
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 832a41f..2c1bbaa 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -407,7 +407,7 @@ static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
return SUNXI_MUSB_TXFUNCADDR + offset;
}
-static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
+static u8 sunxi_musb_readb(void __iomem *addr, unsigned offset)
{
struct sunxi_glue *glue;
@@ -520,7 +520,7 @@ static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
(int)(addr - sunxi_musb->mregs));
}
-static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset)
+static u16 sunxi_musb_readw(void __iomem *addr, unsigned offset)
{
if (addr == sunxi_musb->mregs) {
/* generic control or fifo control reg access */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 3945328..cfb94f9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -142,7 +142,7 @@ static void tusb_ep_select(void __iomem *mbase, u8 epnum)
/*
* TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
*/
-static u8 tusb_readb(const void __iomem *addr, unsigned offset)
+static u8 tusb_readb(void __iomem *addr, unsigned offset)
{
u16 tmp;
u8 val;
--
1.9.1
next prev parent reply other threads:[~2019-01-21 12:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 12:22 [PATCH v4 0/6] Add MediaTek MUSB Controller Driver min.guo
2019-01-21 12:22 ` [PATCH v4 1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller min.guo
2019-01-21 15:14 ` Rob Herring
2019-01-22 9:36 ` Min Guo
2019-01-22 14:33 ` Bin Liu
2019-01-25 2:07 ` Min Guo
2019-02-14 8:30 ` Min Guo
2019-01-21 12:22 ` [PATCH v4 2/6] arm: dts: mt2701: Add usb2 device nodes min.guo
2019-01-21 12:22 ` [PATCH v4 3/6] usb: musb: Add get/set toggle hooks min.guo
2019-01-21 12:22 ` [PATCH v4 4/6] usb: musb: Add noirq type of dma create interface min.guo
2019-01-21 12:22 ` min.guo [this message]
2019-01-21 15:59 ` [PATCH v4 5/6] usb: musb: Add musb_clearb/w() interface Bin Liu
2019-01-22 1:43 ` Min Guo
2019-01-21 12:22 ` [PATCH v4 6/6] usb: musb: Add support for MediaTek musb controller min.guo
2019-01-21 16:07 ` Bin Liu
2019-01-22 1:45 ` Min Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548073351-13739-6-git-send-email-min.guo@mediatek.com \
--to=min.guo@mediatek.com \
--cc=b-liu@ti.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).