From: Pawel Laszczak <pawell@cadence.com>
To: devicetree@vger.kernel.org
Cc: gregkh@linuxfoundation.org, mark.rutland@arm.com,
linux-usb@vger.kernel.org, hdegoede@redhat.com,
heikki.krogerus@linux.intel.com, andy.shevchenko@gmail.com,
robh+dt@kernel.org, rogerq@ti.com, linux-kernel@vger.kernel.org,
jbergsagel@ti.com, nsekhar@ti.com, nm@ti.com,
sureshp@cadence.com, peter.chen@nxp.com, pjez@cadence.com,
kurahul@cadence.com, Pawel Laszczak <pawell@cadence.com>
Subject: [PATCH v3 4/6] usb:common Simplify usb_decode_get_set_descriptor function.
Date: Thu, 31 Jan 2019 11:52:31 +0000 [thread overview]
Message-ID: <1548935553-452-5-git-send-email-pawell@cadence.com> (raw)
In-Reply-To: <1548935553-452-1-git-send-email-pawell@cadence.com>
Patch moves switch responsible for decoding descriptor type
outside snprintf. It's little improves code readability.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
drivers/usb/common/debug.c | 111 +++++++++++++++++++------------------
1 file changed, 57 insertions(+), 54 deletions(-)
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
index bdd529a686e4..a2fbcefe1ea0 100644
--- a/drivers/usb/common/debug.c
+++ b/drivers/usb/common/debug.c
@@ -104,62 +104,65 @@ static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest,
__u16 wValue, __u16 wIndex,
__u16 wLength, char *str)
{
+ char *s;
+
+ switch (wValue >> 8) {
+ case USB_DT_DEVICE:
+ s = "Device";
+ break;
+ case USB_DT_CONFIG:
+ s = "Configuration";
+ break;
+ case USB_DT_STRING:
+ s = "String";
+ break;
+ case USB_DT_INTERFACE:
+ s = "Interface";
+ break;
+ case USB_DT_ENDPOINT:
+ s = "Endpoint";
+ break;
+ case USB_DT_DEVICE_QUALIFIER:
+ s = "Device Qualifier";
+ break;
+ case USB_DT_OTHER_SPEED_CONFIG:
+ s = "Other Speed Config";
+ break;
+ case USB_DT_INTERFACE_POWER:
+ s = "Interface Power";
+ break;
+ case USB_DT_OTG:
+ s = "OTG";
+ break;
+ case USB_DT_DEBUG:
+ s = "Debug";
+ break;
+ case USB_DT_INTERFACE_ASSOCIATION:
+ s = "Interface Association";
+ break;
+ case USB_DT_BOS:
+ s = "BOS";
+ break;
+ case USB_DT_DEVICE_CAPABILITY:
+ s = "Device Capability";
+ break;
+ case USB_DT_PIPE_USAGE:
+ s = "Pipe Usage";
+ break;
+ case USB_DT_SS_ENDPOINT_COMP:
+ s = "SS Endpoint Companion";
+ break;
+ case USB_DT_SSP_ISOC_ENDPOINT_COMP:
+ s = "SSP Isochronous Endpoint Companion";
+ break;
+ default:
+ s = "UNKNOWN";
+ break;
+ }
+
sprintf(str, "%s %s Descriptor(Index = %d, Length = %d)",
bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
- ({ char *s;
- switch (wValue >> 8) {
- case USB_DT_DEVICE:
- s = "Device";
- break;
- case USB_DT_CONFIG:
- s = "Configuration";
- break;
- case USB_DT_STRING:
- s = "String";
- break;
- case USB_DT_INTERFACE:
- s = "Interface";
- break;
- case USB_DT_ENDPOINT:
- s = "Endpoint";
- break;
- case USB_DT_DEVICE_QUALIFIER:
- s = "Device Qualifier";
- break;
- case USB_DT_OTHER_SPEED_CONFIG:
- s = "Other Speed Config";
- break;
- case USB_DT_INTERFACE_POWER:
- s = "Interface Power";
- break;
- case USB_DT_OTG:
- s = "OTG";
- break;
- case USB_DT_DEBUG:
- s = "Debug";
- break;
- case USB_DT_INTERFACE_ASSOCIATION:
- s = "Interface Association";
- break;
- case USB_DT_BOS:
- s = "BOS";
- break;
- case USB_DT_DEVICE_CAPABILITY:
- s = "Device Capability";
- break;
- case USB_DT_PIPE_USAGE:
- s = "Pipe Usage";
- break;
- case USB_DT_SS_ENDPOINT_COMP:
- s = "SS Endpoint Companion";
- break;
- case USB_DT_SSP_ISOC_ENDPOINT_COMP:
- s = "SSP Isochronous Endpoint Companion";
- break;
- default:
- s = "UNKNOWN";
- break;
- } s; }), wValue & 0xff, wLength);
+ s, wValue & 0xff, wLength);
}
static void usb_decode_get_configuration(__u16 wLength, char *str)
--
2.17.1
next prev parent reply other threads:[~2019-01-31 11:52 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 11:52 [PATCH v3 0/6] Introduced new Cadence USBSS DRD Driver Pawel Laszczak
2019-01-31 11:52 ` [PATCH v3 1/6] dt-bindings: add binding for USBSS-DRD controller Pawel Laszczak
2019-02-13 22:48 ` Rob Herring
2019-02-14 6:08 ` Pawel Laszczak
2019-02-14 14:00 ` Rob Herring
2019-02-15 1:56 ` Peter Chen
2019-01-31 11:52 ` [PATCH v3 2/6] usb:common Separated decoding functions from dwc3 driver Pawel Laszczak
2019-02-04 11:45 ` Greg KH
2019-02-04 14:17 ` Felipe Balbi
2019-02-04 14:47 ` Greg KH
2019-02-11 12:56 ` Pawel Laszczak
2019-02-11 13:20 ` Felipe Balbi
2019-02-11 13:30 ` Pawel Laszczak
2019-02-05 8:13 ` Pawel Laszczak
2019-02-05 8:25 ` Felipe Balbi
2019-02-04 11:45 ` Greg KH
2019-01-31 11:52 ` [PATCH v3 3/6] usb:common Patch simplify usb_decode_set_clear_feature function Pawel Laszczak
2019-01-31 11:52 ` Pawel Laszczak [this message]
2019-01-31 12:27 ` [PATCH v3 4/6] usb:common Simplify usb_decode_get_set_descriptor function Andy Shevchenko
2019-02-04 11:47 ` Greg KH
2019-02-11 12:21 ` Pawel Laszczak
2019-01-31 11:52 ` [PATCH v3 5/6] usb:cdns3 Add Cadence USB3 DRD Driver Pawel Laszczak
2019-02-04 11:48 ` Greg KH
2019-02-05 8:33 ` Pawel Laszczak
2019-01-31 11:52 ` [PATCH v3 6/6] usb:cdns3 Fix for stuck packets in on-chip OUT buffer Pawel Laszczak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548935553-452-5-git-send-email-pawell@cadence.com \
--to=pawell@cadence.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=jbergsagel@ti.com \
--cc=kurahul@cadence.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.chen@nxp.com \
--cc=pjez@cadence.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=sureshp@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).