From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Zabel Subject: Re: [PATCH v2 1/2] dt-bindings: reset: Add HI3670 reset controller binding Date: Fri, 15 Feb 2019 11:25:30 +0100 Message-ID: <1550226330.4531.10.camel@pengutronix.de> References: <20190215054955.788-1-manivannan.sadhasivam@linaro.org> <20190215054955.788-2-manivannan.sadhasivam@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190215054955.788-2-manivannan.sadhasivam@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Manivannan Sadhasivam , xuwei5@hisilicon.com, robh+dt@kernel.org Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, guodong.xu@linaro.org, john.stultz@linaro.org List-Id: devicetree@vger.kernel.org On Fri, 2019-02-15 at 11:19 +0530, Manivannan Sadhasivam wrote: > HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same > driver is reused for HI3670 SoC and the binding is documented here which > uses the fallback approach. > > Signed-off-by: Manivannan Sadhasivam > --- > .../devicetree/bindings/reset/hisilicon,hi3660-reset.txt | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > index 2bf3344b2a02..2df4bddeb688 100644 > --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt > @@ -5,11 +5,12 @@ Please also refer to reset.txt in this directory for common reset > controller binding usage. > > The reset controller registers are part of the system-ctl block on > -hi3660 SoC. > +hi3660 and hi3670 SoCs. > > Required properties: > -- compatible: should be > - "hisilicon,hi3660-reset" > +- compatible: should be one of the following: > + "hisilicon,hi3660-reset" for HI3660 > + "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670 > - hisi,rst-syscon: phandle of the reset's syscon. > - #reset-cells : Specifies the number of cells needed to encode a > reset source. The type shall be a and the value shall be 2. Thank you, I think it makes sense for this to be merged together with the other patch via the linux-hisi tree. Acked-by: Philipp Zabel regards Philipp