Re: [PATCH v1 1/3] ARM: dts: stm32: Add Vivante GPU support on STM32MP157c

[Lucas Stach <l.stach@pengutronix.de>]

Hi Pierre-Yves,

Am Freitag, den 15.02.2019, 16:58 +0100 schrieb Pierre-Yves MORDRET:
> Append Vivante GPU DT configuration.
> 
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>  arch/arm/boot/dts/stm32mp157c.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index f8bbfff..29540bc 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -1106,6 +1106,16 @@
> >  			status = "disabled";
> >  		};
>  
> +		gpu: gpu@59000000 {
> +			compatible = "vivante,gc";
> +			reg = <0x59000000 0x800>;
> +			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc GPU>, <&rcc GPU_K>;
> +			clock-names = "bus" ,"core";

Is this a 2D only core? If it is also 3D capable the binding says you
need to specify the shader clock (may be the same clock feeding the
core).

Regards,
Lucas

> +			resets = <&rcc GPU_R>;
> +			status = "disabled";
> +		};
> +
>  		dsi: dsi@5a000000 {
>  			compatible = "st,stm32-dsi";
>  			reg = <0x5a000000 0x800>;