[PATCH v6 09/22] iommu/mediatek: Refine protect memory definition

[Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]

The protect memory setting is a little different in the different SoCs.
In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
protect) shift bit is normally 4 while it shift 5 bits only in the
mt8173. This patch delete the complex MACRO and use a common if-else
instead.

Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/iommu/mtk_iommu.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 3bf7b76..483f6e8 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -52,12 +52,9 @@
 #define REG_MMU_DCM_DIS				0x050
 
 #define REG_MMU_CTRL_REG			0x110
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
 #define F_MMU_PREFETCH_RT_REPLACE_MOD		BIT(4)
-#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
-	((data)->plat_data->m4u_plat == M4U_MT2712 ? 4 : 5)
-/* It's named by F_MMU_TF_PROT_SEL in mt2712. */
-#define F_MMU_TF_PROTECT_SEL(prot, data) \
-	(((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173	(2 << 5)
 
 #define REG_MMU_IVRP_PADDR			0x114
 
@@ -519,9 +516,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		return ret;
 	}
 
-	regval = F_MMU_TF_PROTECT_SEL(2, data);
 	if (data->plat_data->m4u_plat == M4U_MT8173)
-		regval |= F_MMU_PREFETCH_RT_REPLACE_MOD;
+		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
+			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
+	else
+		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
 	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
 
 	regval = F_L2_MULIT_HIT_EN |
-- 
1.9.1