From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pascal PAILLET-LME Subject: [PATCH 3/8] dt-bindings: regulator: remove interrupt-parent description on stpmic1 Date: Tue, 19 Feb 2019 10:04:32 +0000 Message-ID: <1550570647-9555-4-git-send-email-p.paillet@st.com> References: <1550570647-9555-1-git-send-email-p.paillet@st.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <1550570647-9555-1-git-send-email-p.paillet@st.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: "lgirdwood@gmail.com" , "broonie@kernel.org" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "axel.lin@ingics.com" Cc: Pascal PAILLET-LME , "benjamin.gaignard@linaro.org" , "linux-stm32@st-md-mailman.stormreply.com" List-Id: devicetree@vger.kernel.org The interrupt parent description is not needed as the parent is a parent node with 'interrupt-controller' property. Signed-off-by: pascal paillet --- Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index a3f4762..de27897 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -29,7 +29,6 @@ Optional properties: if set, all regulators are switched off in case of over-current detection on this regulator, if not set, the driver only sends an over-current event. -- interrupt-parent: phandle to the parent interrupt controller - interrupts: index of current limit detection interrupt - -supply: phandle to the parent supply/regulator node each regulator supply can be described except vref_ddr. @@ -43,7 +42,6 @@ regulators { vdd_core: buck1 { regulator-name = "vdd_core"; interrupts = ; - interrupt-parent = <&pmic>; st,mask-reset; regulator-pull-down; regulator-min-microvolt = <700000>; @@ -53,7 +51,6 @@ regulators { v3v3: buck4 { regulator-name = "v3v3"; interrupts = ; - interrupt-parent = <&mypmic>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; -- 1.9.1