From: Pascal PAILLET-LME <p.paillet@st.com>
To: "lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"axel.lin@ingics.com" <axel.lin@ingics.com>
Cc: Pascal PAILLET-LME <p.paillet@st.com>,
"benjamin.gaignard@linaro.org" <benjamin.gaignard@linaro.org>,
"linux-stm32@st-md-mailman.stormreply.com"
<linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH 5/8] regulator: stpmic1: Remove support for regulator pull down
Date: Tue, 19 Feb 2019 10:04:33 +0000 [thread overview]
Message-ID: <1550570647-9555-6-git-send-email-p.paillet@st.com> (raw)
In-Reply-To: <1550570647-9555-1-git-send-email-p.paillet@st.com>
Regulator high pull down are enabled by default so remove support in the
driver.
Signed-off-by: pascal paillet <p.paillet@st.com>
---
drivers/regulator/stpmic1_regulator.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c
index f5c0e58..6970e45 100644
--- a/drivers/regulator/stpmic1_regulator.c
+++ b/drivers/regulator/stpmic1_regulator.c
@@ -133,7 +133,6 @@ enum {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
@@ -145,7 +144,6 @@ enum {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
.set_over_current_protection = stpmic1_set_icc,
@@ -155,7 +153,6 @@ enum {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
@@ -177,7 +174,6 @@ enum {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .set_pull_down = regulator_set_pull_down_regmap,
};
static const struct regulator_ops stpmic1_switch_regul_ops = {
@@ -203,8 +199,6 @@ enum {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -228,8 +222,6 @@ enum {
.bypass_mask = LDO_BYPASS_MASK, \
.bypass_val_on = LDO_BYPASS_MASK, \
.bypass_val_off = 0, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -247,8 +239,6 @@ enum {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@@ -288,8 +278,6 @@ enum {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
- .pull_down_reg = ids##_PULL_DOWN_REG, \
- .pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
--
1.9.1
next prev parent reply other threads:[~2019-02-19 10:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 10:04 [PATCH 0/8] STPMIC1 Fixes Pascal PAILLET-LME
2019-02-19 10:04 ` [PATCH 1/8] regulator: stpmic1: Use regulator mode definition from bindings Pascal PAILLET-LME
2019-02-19 10:04 ` [PATCH 3/8] dt-bindings: regulator: remove interrupt-parent description on stpmic1 Pascal PAILLET-LME
2019-02-19 10:04 ` [PATCH 2/8] regulator: stpmic1: Simplify regulators registration Pascal PAILLET-LME
2019-02-19 10:04 ` [PATCH 4/8] dt-bindings: regulator: remove regulator pull-down support for stpmic1 Pascal PAILLET-LME
2019-02-19 10:04 ` Pascal PAILLET-LME [this message]
2019-02-19 10:04 ` [PATCH 7/8] dt-bindings: regulator: Add active discharge " Pascal PAILLET-LME
2019-02-19 10:04 ` [PATCH 6/8] regulator: stpmic1: Change buck1 voltage range Pascal PAILLET-LME
2019-02-19 10:42 ` Mark Brown
2019-02-19 10:04 ` [PATCH 8/8] regulator: stpmic1: Add active discharge support Pascal PAILLET-LME
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550570647-9555-6-git-send-email-p.paillet@st.com \
--to=p.paillet@st.com \
--cc=axel.lin@ingics.com \
--cc=benjamin.gaignard@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).