From: Qii Wang <qii.wang@mediatek.com>
To: wsa@the-dreams.de
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
srv_heupstream@mediatek.com, leilk.liu@mediatek.com,
qii.wang@mediatek.com, xinping.qian@mediatek.com,
liguo.zhang@mediatek.com, robh@kernel.org
Subject: [PATCH v5 4/5] i2c: mediatek: Add i2c and apdma sync in i2c driver
Date: Tue, 26 Feb 2019 21:10:59 +0800 [thread overview]
Message-ID: <1551186660-16902-5-git-send-email-qii.wang@mediatek.com> (raw)
In-Reply-To: <1551186660-16902-1-git-send-email-qii.wang@mediatek.com>
When i2c and apdma use different source clocks, we should enable
synchronization between them.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 14d6b38..75d88e1 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -77,6 +77,8 @@
#define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
#define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
#define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
+#define I2C_CONTROL_DMAACK_EN (0x1 << 8)
+#define I2C_CONTROL_ASYNC_MODE (0x1 << 9)
#define I2C_CONTROL_WRAPPER (0x1 << 0)
#define I2C_DRV_NAME "i2c-mt65xx"
@@ -169,6 +171,7 @@ struct mtk_i2c_compatible {
unsigned char aux_len_reg: 1;
unsigned char support_33bits: 1;
unsigned char timing_adjust: 1;
+ unsigned char dma_sync: 1;
};
struct mtk_i2c {
@@ -218,6 +221,7 @@ struct mtk_i2c {
.aux_len_reg = 1,
.support_33bits = 1,
.timing_adjust = 1,
+ .dma_sync = 0,
};
static const struct mtk_i2c_compatible mt6577_compat = {
@@ -229,6 +233,7 @@ struct mtk_i2c {
.aux_len_reg = 0,
.support_33bits = 0,
.timing_adjust = 0,
+ .dma_sync = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -240,6 +245,7 @@ struct mtk_i2c {
.aux_len_reg = 0,
.support_33bits = 0,
.timing_adjust = 0,
+ .dma_sync = 0,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -251,6 +257,7 @@ struct mtk_i2c {
.aux_len_reg = 1,
.support_33bits = 0,
.timing_adjust = 0,
+ .dma_sync = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -261,6 +268,7 @@ struct mtk_i2c {
.aux_len_reg = 1,
.support_33bits = 1,
.timing_adjust = 0,
+ .dma_sync = 0,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -360,6 +368,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
control_reg = I2C_CONTROL_ACKERR_DET_EN |
I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
+ if (i2c->dev_comp->dma_sync)
+ control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
+
mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
--
1.7.9.5
next prev parent reply other threads:[~2019-02-26 13:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-26 13:10 [PATCH v5 0/5] add i2c support for mt8183 Qii Wang
2019-02-26 13:10 ` [PATCH v5 1/5] i2c: mediatek: Add offsets array for new i2c registers Qii Wang
2019-02-26 13:10 ` [PATCH v5 2/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding Qii Wang
2019-02-26 16:41 ` Rob Herring
2019-02-26 13:10 ` [PATCH v5 3/5] i2c: mediatek: Add arb clock in i2c driver Qii Wang
2019-03-06 10:44 ` Nicolas Boichat
2019-03-06 10:49 ` Nicolas Boichat
2019-03-07 4:57 ` Qii Wang
2019-02-26 13:10 ` Qii Wang [this message]
2019-03-06 10:44 ` [PATCH v5 4/5] i2c: mediatek: Add i2c and apdma sync " Nicolas Boichat
2019-02-26 13:11 ` [PATCH v5 5/5] i2c: mediatek: Add i2c support for MediaTek MT8183 Qii Wang
2019-03-06 10:52 ` Nicolas Boichat
2019-03-07 5:01 ` Qii Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551186660-16902-5-git-send-email-qii.wang@mediatek.com \
--to=qii.wang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=leilk.liu@mediatek.com \
--cc=liguo.zhang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
--cc=xinping.qian@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).