* [PATCH] arm64: dts: add gce node for mt8183
@ 2019-03-06 10:10 Bibby Hsieh
2019-03-07 1:24 ` CK Hu
0 siblings, 1 reply; 3+ messages in thread
From: Bibby Hsieh @ 2019-03-06 10:10 UTC (permalink / raw)
To: Jassi Brar, Matthias Brugger, Rob Herring, CK HU
Cc: Daniel Kurtz, Sascha Hauer, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, srv_heupstream, Sascha Hauer,
Philipp Zabel, Nicolas Boichat, Bibby Hsieh, YT Shen,
Daoyuan Huang, Jiaguang Zhang, Dennis-YC Hsieh, Houlong Wei,
ginny.chen, kendrick.hsu, Frederic Chen
This patch need based on v5.0-rc1 and these series
http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017570.html
http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017320.html
http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017196.html
http://lists.infradead.org/pipermail/linux-mediatek/2019-March/018005.html
add gce device node for mt8183
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 165b859..5006368 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gce/mt8183-gce.h>
#include "mt8183-pinfunc.h"
/ {
@@ -238,6 +239,18 @@
clock-names = "spi", "wrap";
};
+ gce: gce@10238000 {
+ compatible = "mediatek,mt8183-gce";
+ reg = <0 0x10238000 0 0x4000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+ thread-num = <CMDQ_THR_MAX_COUNT>;
+ #mbox-cells = <3>;
+ #gce-event-cells = <1>;
+ #gce-subsys-cells = <2>;
+ clocks = <&infracfg CLK_INFRA_GCE>;
+ clock-names = "gce";
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt8183-uart",
"mediatek,mt6577-uart";
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: add gce node for mt8183
2019-03-06 10:10 [PATCH] arm64: dts: add gce node for mt8183 Bibby Hsieh
@ 2019-03-07 1:24 ` CK Hu
2019-03-07 1:47 ` houlong wei
0 siblings, 1 reply; 3+ messages in thread
From: CK Hu @ 2019-03-07 1:24 UTC (permalink / raw)
To: Bibby Hsieh
Cc: Jassi Brar, Matthias Brugger, Rob Herring, Daniel Kurtz,
Sascha Hauer, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, srv_heupstream, Sascha Hauer,
Philipp Zabel <p.zabel@pengutronix.de>, Nicolas Boichat <drinkcat@chromium.org>, YT Shen <yt.shen@mediatek.com>, Daoyuan Huang <daoyuan.huang@mediatek.com>, Jiaguang Zhang,
Dennis-YC Hsieh, Houlong Wei, ginny.chen, kendrick.hsu,
Frederic Chen
[-- Attachment #1: Type: text/plain, Size: 1829 bytes --]
Hi, Bibby:
On Wed, 2019-03-06 at 18:10 +0800, Bibby Hsieh wrote:
> This patch need based on v5.0-rc1 and these series
> http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017570.html
> http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017320.html
> http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017196.html
> http://lists.infradead.org/pipermail/linux-mediatek/2019-March/018005.html
>
> add gce device node for mt8183
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 165b859..5006368 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/mt8183-clk.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gce/mt8183-gce.h>
> #include "mt8183-pinfunc.h"
>
> / {
> @@ -238,6 +239,18 @@
> clock-names = "spi", "wrap";
> };
>
> + gce: gce@10238000 {
> + compatible = "mediatek,mt8183-gce";
> + reg = <0 0x10238000 0 0x4000>;
> + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
> + thread-num = <CMDQ_THR_MAX_COUNT>;
I does not find 'thread-num' in binding document [1].
[1]
https://www.kernel.org/doc/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
Regards,
CK
> + #mbox-cells = <3>;
> + #gce-event-cells = <1>;
> + #gce-subsys-cells = <2>;
> + clocks = <&infracfg CLK_INFRA_GCE>;
> + clock-names = "gce";
> + };
> +
> uart0: serial@11002000 {
> compatible = "mediatek,mt8183-uart",
> "mediatek,mt6577-uart";
[-- Attachment #2: Type: text/html, Size: 2665 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: add gce node for mt8183
2019-03-07 1:24 ` CK Hu
@ 2019-03-07 1:47 ` houlong wei
0 siblings, 0 replies; 3+ messages in thread
From: houlong wei @ 2019-03-07 1:47 UTC (permalink / raw)
To: CK Hu, bibby.hsieh
Cc: Bibby Hsieh (謝濟遠), Jassi Brar,
Matthias Brugger, Rob Herring, Daniel Kurtz, Sascha Hauer,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, srv_heupstream, Sascha Hauer,
Philipp Zabel, Nicolas Boichat
On Thu, 2019-03-07 at 09:24 +0800, CK Hu wrote:
> Hi, Bibby:
>
> On Wed, 2019-03-06 at 18:10 +0800, Bibby Hsieh wrote:
> > This patch need based on v5.0-rc1 and these series
> > http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017570.html
> > http://lists.infradead.org/pipermail/linux-mediatek/2019-February/017320.html
> > http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017196.html
> > http://lists.infradead.org/pipermail/linux-mediatek/2019-March/018005.html
> >
> > add gce device node for mt8183
> >
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 165b859..5006368 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -8,6 +8,7 @@
> > #include <dt-bindings/clock/mt8183-clk.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/gce/mt8183-gce.h>
> > #include "mt8183-pinfunc.h"
> >
> > / {
> > @@ -238,6 +239,18 @@
> > clock-names = "spi", "wrap";
> > };
> >
> > + gce: gce@10238000 {
> > + compatible = "mediatek,mt8183-gce";
> > + reg = <0 0x10238000 0 0x4000>;
> > + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
> > + thread-num = <CMDQ_THR_MAX_COUNT>;
>
> I does not find 'thread-num' in binding document [1].
>
> [1]
> https://www.kernel.org/doc/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
>
> Regards,
> CK
The property "thread-num" is not used and and it was removed from the
properties description, but I forgot to remove it from the example. That
is misleading and I'm sorry for that. @Bibby, could you please help
remove it from the example in mtk-gce.txt if you would upload a new
version?
>
> > + #mbox-cells = <3>;
> > + #gce-event-cells = <1>;
> > + #gce-subsys-cells = <2>;
> > + clocks = <&infracfg CLK_INFRA_GCE>;
> > + clock-names = "gce";
> > + };
> > +
> > uart0: serial@11002000 {
> > compatible = "mediatek,mt8183-uart",
> > "mediatek,mt6577-uart";
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-03-07 1:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-06 10:10 [PATCH] arm64: dts: add gce node for mt8183 Bibby Hsieh
2019-03-07 1:24 ` CK Hu
2019-03-07 1:47 ` houlong wei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).