From: Lucas Stach <l.stach@pengutronix.de>
To: Eric Nelson <eric@nelint.com>, linux-clk@vger.kernel.org
Cc: anson.huang@nxp.com, clement.peron@devialet.com,
colin.didier@devialet.com, devicetree@vger.kernel.org,
festevam@gmail.com, kernel@pengutronix.de,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-kernel@vger.kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, robh+dt@kernel.org,
s.hauer@pengutronix.de, sboyd@kernel.org, shawnguo@kernel.org,
tiny.windzz@gmail.com
Subject: Re: [PATCH] clk: imx6q: remove unsupported pll4_audio_div
Date: Mon, 11 Mar 2019 12:37:51 +0100 [thread overview]
Message-ID: <1552304271.2453.12.camel@pengutronix.de> (raw)
In-Reply-To: <1552259930-27786-1-git-send-email-eric@nelint.com>
Hi Eric,
Am Sonntag, den 10.03.2019, 16:18 -0700 schrieb Eric Nelson:
> The pll4_audio_div attempted to reflect one bit of a two-bit
> divisor (AUDIO_DIV_LSB) in the CCM_ANALOG_MISC2 register.
>
> Unfortunately, this divisor is non-functional at least on the
> latest silicon revisions and has been removed from the reference
> manual.
>
> This is discussed in this NXP Community thread:
>
> https://community.nxp.com/thread/462806
>
> Remove the definition of pll4_audio_div to reflect this and
> reparent the ssi, cko1, and ESAI/ASRC/SPDIF clocks to the
> pll4_post_div clock.
>
> > Signed-off-by: Eric Nelson <eric@nelint.com>
> ---
> drivers/clk/imx/clk-imx6q.c | 7 +-
> include/dt-bindings/clock/imx6qdl-clock.h | 127 +++++++++++++++---------------
> 2 files changed, 66 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
> index 708e7c5..56d6ebb 100644
> --- a/drivers/clk/imx/clk-imx6q.c
> +++ b/drivers/clk/imx/clk-imx6q.c
> > @@ -32,7 +32,7 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
> > static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
> > static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
> > static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
> > -static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
> > +static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
> > static const char *gpu_axi_sels[] = { "axi", "ahb", };
> > static const char *pre_axi_sels[] = { "axi", "ahb", };
> > static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
> > @@ -52,7 +52,7 @@ static const char *ipu2_di0_sels_2[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_
> > static const char *ipu2_di1_sels_2[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", };
> > static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
> > static const char *pcie_axi_sels[] = { "axi", "ahb", };
> > -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
> > +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
> > static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
> > static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
> static const char *enfc_sels_2[] = {"pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", };
> @@ -66,7 +66,7 @@ static const char *ecspi_sels[] = { "pll3_60m", "osc", };
> static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", };
> > static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
> > "video_27m", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
> > - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
> > + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
> static const char *cko2_sels[] = {
> > "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
> > "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
> @@ -607,7 +607,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
> > }
>
> > clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
> > - clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
> > clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
> > clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
>
> diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
> index b3cef29..dea23a9 100644
> --- a/include/dt-bindings/clock/imx6qdl-clock.h
> +++ b/include/dt-bindings/clock/imx6qdl-clock.h
> @@ -213,69 +213,68 @@
> > #define IMX6QDL_CLK_CKO2 200
> > #define IMX6QDL_CLK_CKO 201
> > #define IMX6QDL_CLK_VDOA 202
> > -#define IMX6QDL_CLK_PLL4_AUDIO_DIV 203
> > -#define IMX6QDL_CLK_LVDS1_SEL 204
> > -#define IMX6QDL_CLK_LVDS2_SEL 205
> > -#define IMX6QDL_CLK_LVDS1_GATE 206
> > -#define IMX6QDL_CLK_LVDS2_GATE 207
> > -#define IMX6QDL_CLK_ESAI_IPG 208
> > -#define IMX6QDL_CLK_ESAI_MEM 209
> > -#define IMX6QDL_CLK_ASRC_IPG 210
> > -#define IMX6QDL_CLK_ASRC_MEM 211
> > -#define IMX6QDL_CLK_LVDS1_IN 212
> > -#define IMX6QDL_CLK_LVDS2_IN 213
> > -#define IMX6QDL_CLK_ANACLK1 214
> > -#define IMX6QDL_CLK_ANACLK2 215
> > -#define IMX6QDL_PLL1_BYPASS_SRC 216
> > -#define IMX6QDL_PLL2_BYPASS_SRC 217
> > -#define IMX6QDL_PLL3_BYPASS_SRC 218
> > -#define IMX6QDL_PLL4_BYPASS_SRC 219
> > -#define IMX6QDL_PLL5_BYPASS_SRC 220
> > -#define IMX6QDL_PLL6_BYPASS_SRC 221
> > -#define IMX6QDL_PLL7_BYPASS_SRC 222
> > -#define IMX6QDL_CLK_PLL1 223
> > -#define IMX6QDL_CLK_PLL2 224
> > -#define IMX6QDL_CLK_PLL3 225
> > -#define IMX6QDL_CLK_PLL4 226
> > -#define IMX6QDL_CLK_PLL5 227
> > -#define IMX6QDL_CLK_PLL6 228
> > -#define IMX6QDL_CLK_PLL7 229
> > -#define IMX6QDL_PLL1_BYPASS 230
> > -#define IMX6QDL_PLL2_BYPASS 231
> > -#define IMX6QDL_PLL3_BYPASS 232
> > -#define IMX6QDL_PLL4_BYPASS 233
> > -#define IMX6QDL_PLL5_BYPASS 234
> > -#define IMX6QDL_PLL6_BYPASS 235
> > -#define IMX6QDL_PLL7_BYPASS 236
> > -#define IMX6QDL_CLK_GPT_3M 237
> > -#define IMX6QDL_CLK_VIDEO_27M 238
> > -#define IMX6QDL_CLK_MIPI_CORE_CFG 239
> > -#define IMX6QDL_CLK_MIPI_IPG 240
> > -#define IMX6QDL_CLK_CAAM_MEM 241
> > -#define IMX6QDL_CLK_CAAM_ACLK 242
> > -#define IMX6QDL_CLK_CAAM_IPG 243
> > -#define IMX6QDL_CLK_SPDIF_GCLK 244
> > -#define IMX6QDL_CLK_UART_SEL 245
> > -#define IMX6QDL_CLK_IPG_PER_SEL 246
> > -#define IMX6QDL_CLK_ECSPI_SEL 247
> > -#define IMX6QDL_CLK_CAN_SEL 248
> > -#define IMX6QDL_CLK_MMDC_CH1_AXI_CG 249
> > -#define IMX6QDL_CLK_PRE0 250
> > -#define IMX6QDL_CLK_PRE1 251
> > -#define IMX6QDL_CLK_PRE2 252
> > -#define IMX6QDL_CLK_PRE3 253
> > -#define IMX6QDL_CLK_PRG0_AXI 254
> > -#define IMX6QDL_CLK_PRG1_AXI 255
> > -#define IMX6QDL_CLK_PRG0_APB 256
> > -#define IMX6QDL_CLK_PRG1_APB 257
> > -#define IMX6QDL_CLK_PRE_AXI 258
> > -#define IMX6QDL_CLK_MLB_SEL 259
> > -#define IMX6QDL_CLK_MLB_PODF 260
> > -#define IMX6QDL_CLK_EPIT1 261
> > -#define IMX6QDL_CLK_EPIT2 262
> > -#define IMX6QDL_CLK_MMDC_P0_IPG 263
> > -#define IMX6QDL_CLK_DCIC1 264
> > -#define IMX6QDL_CLK_DCIC2 265
> > -#define IMX6QDL_CLK_END 266
> > +#define IMX6QDL_CLK_LVDS1_SEL 203
> > +#define IMX6QDL_CLK_LVDS2_SEL 204
> > +#define IMX6QDL_CLK_LVDS1_GATE 205
> > +#define IMX6QDL_CLK_LVDS2_GATE 206
> > +#define IMX6QDL_CLK_ESAI_IPG 207
> > +#define IMX6QDL_CLK_ESAI_MEM 208
> > +#define IMX6QDL_CLK_ASRC_IPG 209
> > +#define IMX6QDL_CLK_ASRC_MEM 210
> > +#define IMX6QDL_CLK_LVDS1_IN 211
> > +#define IMX6QDL_CLK_LVDS2_IN 212
> > +#define IMX6QDL_CLK_ANACLK1 213
> > +#define IMX6QDL_CLK_ANACLK2 214
> > +#define IMX6QDL_PLL1_BYPASS_SRC 215
> > +#define IMX6QDL_PLL2_BYPASS_SRC 216
> > +#define IMX6QDL_PLL3_BYPASS_SRC 217
> > +#define IMX6QDL_PLL4_BYPASS_SRC 218
> > +#define IMX6QDL_PLL5_BYPASS_SRC 219
> > +#define IMX6QDL_PLL6_BYPASS_SRC 220
> > +#define IMX6QDL_PLL7_BYPASS_SRC 221
> > +#define IMX6QDL_CLK_PLL1 222
> > +#define IMX6QDL_CLK_PLL2 223
> > +#define IMX6QDL_CLK_PLL3 224
> > +#define IMX6QDL_CLK_PLL4 225
> > +#define IMX6QDL_CLK_PLL5 226
> > +#define IMX6QDL_CLK_PLL6 227
> > +#define IMX6QDL_CLK_PLL7 228
> > +#define IMX6QDL_PLL1_BYPASS 229
> > +#define IMX6QDL_PLL2_BYPASS 230
> > +#define IMX6QDL_PLL3_BYPASS 231
> > +#define IMX6QDL_PLL4_BYPASS 232
> > +#define IMX6QDL_PLL5_BYPASS 233
> > +#define IMX6QDL_PLL6_BYPASS 234
> > +#define IMX6QDL_PLL7_BYPASS 235
> > +#define IMX6QDL_CLK_GPT_3M 236
> > +#define IMX6QDL_CLK_VIDEO_27M 237
> > +#define IMX6QDL_CLK_MIPI_CORE_CFG 238
> > +#define IMX6QDL_CLK_MIPI_IPG 239
> > +#define IMX6QDL_CLK_CAAM_MEM 240
> > +#define IMX6QDL_CLK_CAAM_ACLK 241
> > +#define IMX6QDL_CLK_CAAM_IPG 242
> > +#define IMX6QDL_CLK_SPDIF_GCLK 243
> > +#define IMX6QDL_CLK_UART_SEL 244
> > +#define IMX6QDL_CLK_IPG_PER_SEL 245
> > +#define IMX6QDL_CLK_ECSPI_SEL 246
> > +#define IMX6QDL_CLK_CAN_SEL 247
> > +#define IMX6QDL_CLK_MMDC_CH1_AXI_CG 248
> > +#define IMX6QDL_CLK_PRE0 249
> > +#define IMX6QDL_CLK_PRE1 250
> > +#define IMX6QDL_CLK_PRE2 251
> > +#define IMX6QDL_CLK_PRE3 252
> > +#define IMX6QDL_CLK_PRG0_AXI 253
> > +#define IMX6QDL_CLK_PRG1_AXI 254
> > +#define IMX6QDL_CLK_PRG0_APB 255
> > +#define IMX6QDL_CLK_PRG1_APB 256
> > +#define IMX6QDL_CLK_PRE_AXI 257
> > +#define IMX6QDL_CLK_MLB_SEL 258
> > +#define IMX6QDL_CLK_MLB_PODF 259
> > +#define IMX6QDL_CLK_EPIT1 260
> > +#define IMX6QDL_CLK_EPIT2 261
> > +#define IMX6QDL_CLK_MMDC_P0_IPG 262
> > +#define IMX6QDL_CLK_DCIC1 263
> > +#define IMX6QDL_CLK_DCIC2 264
> > +#define IMX6QDL_CLK_END 265
You can not renumber the DT clock defines, as this breaks DT backward
compatibility. You can however remove IMX6QDL_CLK_PLL4_AUDIO_DIV and
leave a hole in the numbers, maybe with a comment about why it exists.
Regards,
Lucas
next prev parent reply other threads:[~2019-03-11 11:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-10 23:18 [PATCH] clk: imx6q: remove unsupported pll4_audio_div Eric Nelson
2019-03-11 11:37 ` Lucas Stach [this message]
2019-03-11 14:02 ` Eric Nelson
2019-03-11 15:39 ` [V2 0/2] ARM: imx6qdl: remove PLL4_AUDIO_DIV clock Eric Nelson
2019-03-11 15:59 ` Eric Nelson
2019-03-11 15:59 ` [V2 1/2] clk: imx6q: remove unsupported pll4_audio_div Eric Nelson
2019-03-11 16:38 ` Fabio Estevam
2019-03-11 18:35 ` Stephen Boyd
2019-03-11 20:48 ` Eric Nelson
2019-03-18 20:25 ` Stephen Boyd
2019-03-19 14:34 ` Aisheng Dong
2019-03-11 15:59 ` [PATCH 2/2] ARM: dts: imx6q: remove references to PLL4_AUDIO_DIV Eric Nelson
2019-03-11 16:39 ` Fabio Estevam
2019-03-11 14:20 ` [PATCH] clk: imx6q: remove unsupported pll4_audio_div kbuild test robot
2019-03-13 7:43 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552304271.2453.12.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=anson.huang@nxp.com \
--cc=clement.peron@devialet.com \
--cc=colin.didier@devialet.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@nelint.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tiny.windzz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).