From: Stanley Chu <stanley.chu@mediatek.com>
To: linux-scsi@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
chunfeng.yun@mediatek.com, kishon@ti.com,
martin.petersen@oracle.com, avri.altman@wdc.com,
alim.akhtar@samsung.com, pedrom.sousa@synopsys.com
Cc: vivek.gautam@codeaurora.org, subhashj@codeaurora.org,
liwei213@huawei.com, linux-mediatek@lists.infradead.org,
matthias.bgg@gmail.com, kuohong.wang@mediatek.com,
peter.wang@mediatek.com, chun-hung.wu@mediatek.com,
Stanley Chu <stanley.chu@mediatek.com>
Subject: [PATCH v4 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek
Date: Wed, 13 Mar 2019 12:10:09 +0800 [thread overview]
Message-ID: <1552450211-7149-7-git-send-email-stanley.chu@mediatek.com> (raw)
In-Reply-To: <1552450211-7149-1-git-send-email-stanley.chu@mediatek.com>
Add UFS and UFS PHY node document for Mediatek SoC chips.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
.../devicetree/bindings/ufs/ufs-mediatek.txt | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
new file mode 100644
index 000000000000..9594e1cd7ecf
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
@@ -0,0 +1,44 @@
+* Mediatek Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS M-PHY node.
+
+Required properties for UFS nodes:
+- compatible : Compatible list, contains the following controller:
+ "mediatek,mt8183-ufshci" for MediaTek UFS host controller
+ present on MT81xx chipsets.
+- reg : Address and length of the UFS register set.
+- phys : phandle to m-phy.
+- clocks : List of phandle and clock specifier pairs.
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property. "ufs-clk" is mandatory.
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+- vcc-supply : Power to the UFS device.
+- vcc-fixed-regulator: Specify that vcc-supply is a fixed regulator.
+
+Example:
+
+ ufsphy: phy@11fa0000 {
+ ...
+ };
+
+ ufshci@11270000 {
+ compatible = "mediatek,mt8183-ufshci";
+ reg = <0 0x11270000 0 0x2300>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&ufsphy>;
+
+ clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
+ clock-names = "ufs-clk";
+ freq-table-hz = <0 0>;
+
+ vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+ vcc-fixed-regulator;
+ };
--
2.18.0
next prev parent reply other threads:[~2019-03-13 4:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-13 4:10 scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
2019-03-13 4:10 ` [PATCH v4 0/7] scsi: ufs-mediatek: Add ufshci and ufsphy " Stanley Chu
2019-03-13 4:10 ` [PATCH v4 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param Stanley Chu
2019-03-13 4:10 ` [PATCH v4 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param Stanley Chu
2019-03-13 4:10 ` [PATCH v4 3/7] scsi: ufs-hisi: " Stanley Chu
2019-03-13 4:10 ` [PATCH v4 4/7] dt-bindings: phy: Add document for phy-mtk-ufs Stanley Chu
2019-03-13 4:10 ` Stanley Chu [this message]
2019-03-13 4:10 ` [PATCH v4 6/7] phy: mediatek: Add UFS M-PHY driver Stanley Chu
2019-03-13 4:10 ` [PATCH v4 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552450211-7149-7-git-send-email-stanley.chu@mediatek.com \
--to=stanley.chu@mediatek.com \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=chun-hung.wu@mediatek.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=kuohong.wang@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=liwei213@huawei.com \
--cc=mark.rutland@arm.com \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=pedrom.sousa@synopsys.com \
--cc=peter.wang@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=subhashj@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).