From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: "mark.rutland-5wv7dgnIgG8@public.gmane.org"
<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org"
<martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
"linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
<robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org"
<subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
"Chun-Hung Wu (巫駿宏)"
<Chun-hung.Wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"Kuohong Wang (王國鴻)"
<kuohong.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"Peter Wang (王信友)"
<peter.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"avri.altman-Sjgp3cTcYWE@public.gmane.org"
<avri.altman-Sjgp3cTcYWE@public.gmane.org>,
"robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"liwei213-hv44wF8Li93QT0dZR+AlfA@public.gmane.org"
<liwei213-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
"alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org"
<alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH v5 6/7] phy: mediatek: Add UFS M-PHY driver
Date: Thu, 14 Mar 2019 16:29:05 +0800 [thread overview]
Message-ID: <1552552145.30977.62.camel@mtkswgap22> (raw)
In-Reply-To: <a2b91daa-9391-1a81-a298-efcfcaccc775-l0cyMroinI0@public.gmane.org>
Hi Kishon,
On Thu, 2019-03-14 at 16:06 +0800, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 14/03/19 9:38 AM, Stanley Chu wrote:
> > Add UFS M-PHY driver on MediaTek chipsets.
> >
> > Signed-off-by: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > Reviewed-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> > drivers/phy/mediatek/Kconfig | 11 ++
> > drivers/phy/mediatek/Makefile | 1 +
> > drivers/phy/mediatek/phy-mtk-ufs.c | 239 +++++++++++++++++++++++++++++
> > 3 files changed, 251 insertions(+)
> > create mode 100644 drivers/phy/mediatek/phy-mtk-ufs.c
> >
> > diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> > index 8857d00b3c65..2152d5619c8f 100644
> > --- a/drivers/phy/mediatek/Kconfig
> > +++ b/drivers/phy/mediatek/Kconfig
> > @@ -13,6 +13,16 @@ config PHY_MTK_TPHY
> > multi-ports is first version, otherwise is second veriosn,
> > so you can easily distinguish them by banks layout.
> >
> > +config PHY_MTK_UFS
> > + tristate "MediaTek UFS M-PHY driver"
> > + depends on ARCH_MEDIATEK && OF
> > + select GENERIC_PHY
> > + help
> > + Support for UFS M-PHY on MediaTek chipsets.
> > + Enable this to provide vendor-specific probing,
> > + initialization, power on and power off flow of
> > + specified M-PHYs.
> > +
> > config PHY_MTK_XSPHY
> > tristate "MediaTek XS-PHY Driver"
> > depends on ARCH_MEDIATEK && OF
> > @@ -21,3 +31,4 @@ config PHY_MTK_XSPHY
> > Enable this to support the SuperSpeedPlus XS-PHY transceiver for
> > USB3.1 GEN2 controllers on MediaTek chips. The driver supports
> > multiple USB2.0, USB3.1 GEN2 ports.
> > +
>
> spurious blank space.
Will remove it.
> > diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> > index ee49edc97ee9..08a8e6a97b1e 100644
> > --- a/drivers/phy/mediatek/Makefile
> > +++ b/drivers/phy/mediatek/Makefile
> > @@ -4,4 +4,5 @@
> > #
> >
> > obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
> > +obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
> > obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
> > diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
> > new file mode 100644
> > index 000000000000..71c29ff83f27
> > --- /dev/null
> > +++ b/drivers/phy/mediatek/phy-mtk-ufs.c
> > @@ -0,0 +1,239 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 MediaTek Inc.
> > + * Author: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +
> > +/* mphy register and offsets */
> > +#define MP_GLB_DIG_8C 0x008C
> > +#define FRC_PLL_ISO_EN BIT(8)
> > +#define PLL_ISO_EN BIT(9)
> > +#define FRC_FRC_PWR_ON BIT(10)
> > +#define PLL_PWR_ON BIT(11)
> > +
> > +#define MP_LN_DIG_RX_9C 0xA09C
> > +#define FSM_DIFZ_FRC BIT(18)
> > +
> > +#define MP_LN_DIG_RX_AC 0xA0AC
> > +#define FRC_RX_SQ_EN BIT(0)
> > +#define RX_SQ_EN BIT(1)
> > +
> > +#define MP_LN_RX_44 0xB044
> > +#define FRC_CDR_PWR_ON BIT(17)
> > +#define CDR_PWR_ON BIT(18)
> > +#define FRC_CDR_ISO_EN BIT(19)
> > +#define CDR_ISO_EN BIT(20)
> > +
> > +#define mphy_readl(phy, ofs) readl((phy)->mmio + (ofs))
> > +#define mphy_writel(phy, val, ofs) writel((val), (phy)->mmio + (ofs))
>
> These are better implemented as inline functions.
OK. Will be done in next version.
> > +
> > +struct ufs_mtk_phy {
> > + struct device *dev;
> > + void __iomem *mmio;
> > + struct clk *mp_clk;
> > + struct clk *unipro_clk;
> > +};
> > +
> > +static void mphy_set_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
> > +{
> > + u32 val;
> > +
> > + val = mphy_readl(phy, reg);
> > + val |= bit;
> > + mphy_writel(phy, val, reg);
> > +}
> > +
> > +static void mphy_clr_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
> > +{
> > + u32 val;
> > +
> > + val = mphy_readl(phy, reg);
> > + val &= ~bit;
> > + mphy_writel(phy, val, reg);
> > +}
> > +
> > +static struct ufs_mtk_phy *get_ufs_mtk_phy(struct phy *generic_phy)
> > +{
> > + return (struct ufs_mtk_phy *)phy_get_drvdata(generic_phy);
> > +}
> > +
> > +static int ufs_mtk_phy_clk_init(struct ufs_mtk_phy *phy)
> > +{
> > + struct device *dev = phy->dev;
> > +
> > + phy->unipro_clk = devm_clk_get(dev, "unipro");
> > + if (IS_ERR(phy->unipro_clk)) {
> > + dev_err(dev, "failed to get clock: unipro");
> > + return PTR_ERR(phy->unipro_clk);
> > + }
> > +
> > + phy->mp_clk = devm_clk_get(dev, "mp");
> > + if (IS_ERR(phy->mp_clk)) {
> > + dev_err(dev, "failed to get clock: mp");
> > + return PTR_ERR(phy->mp_clk);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void ufs_mtk_phy_set_active(struct ufs_mtk_phy *phy)
> > +{
> > + /* release DA_MP_PLL_PWR_ON */
> > + mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
> > + mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
> > +
> > + /* release DA_MP_PLL_ISO_EN */
> > + mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
> > + mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
> > +
> > + /* release DA_MP_CDR_PWR_ON */
> > + mphy_set_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
> > + mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
> > +
> > + /* release DA_MP_CDR_ISO_EN */
> > + mphy_clr_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
> > + mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
> > +
> > + /* release DA_MP_RX0_SQ_EN */
> > + mphy_set_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
> > + mphy_clr_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
> > +
> > + /* delay 1us to wait DIFZ stable */
> > + udelay(1);
> > +
> > + /* release DIFZ */
> > + mphy_clr_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
> > +}
> > +
> > +static void ufs_mtk_phy_set_deep_hibern(struct ufs_mtk_phy *phy)
> > +{
> > + /* force DIFZ */
> > + mphy_set_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
> > +
> > + /* force DA_MP_RX0_SQ_EN */
> > + mphy_set_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
> > + mphy_clr_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
> > +
> > + /* force DA_MP_CDR_ISO_EN */
> > + mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
> > + mphy_set_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
> > +
> > + /* force DA_MP_CDR_PWR_ON */
> > + mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
> > + mphy_clr_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
> > +
> > + /* force DA_MP_PLL_ISO_EN */
> > + mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
> > + mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
> > +
> > + /* force DA_MP_PLL_PWR_ON */
> > + mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
> > + mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
> > +}
> > +
> > +static int ufs_mtk_phy_power_on(struct phy *generic_phy)
> > +{
> > + struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(phy->unipro_clk);
> > + if (ret) {
> > + dev_err(phy->dev, "unipro_clk enable failed %d\n", ret);
> > + goto out;
> > + }
> > +
> > + ret = clk_prepare_enable(phy->mp_clk);
> > + if (ret) {
> > + dev_err(phy->dev, "mp_clk enable failed %d\n", ret);
> > + goto out_unprepare_unipro_clk;
> > + }
> > +
> > + ufs_mtk_phy_set_active(phy);
> > +
> > + return 0;
> > +
> > +out_unprepare_unipro_clk:
> > + clk_disable_unprepare(phy->unipro_clk);
> > +out:
> > + return ret;
> > +}
> > +
> > +static int ufs_mtk_phy_power_off(struct phy *generic_phy)
> > +{
> > + struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
> > +
> > + ufs_mtk_phy_set_deep_hibern(phy);
> > +
> > + clk_disable_unprepare(phy->unipro_clk);
> > + clk_disable_unprepare(phy->mp_clk);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops ufs_mtk_phy_ops = {
> > + .power_on = ufs_mtk_phy_power_on,
> > + .power_off = ufs_mtk_phy_power_off,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int ufs_mtk_phy_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct phy *generic_phy;
> > + struct phy_provider *phy_provider;
> > + struct resource *res;
> > + struct ufs_mtk_phy *phy;
> > + int ret;
> > +
> > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> > + if (!phy)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + phy->mmio = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(phy->mmio))
> > + return PTR_ERR(phy->mmio);
> > +
> > + phy->dev = dev;
> > +
> > + ret = ufs_mtk_phy_clk_init(phy);
> > + if (ret)
> > + return ret;
> > +
> > + generic_phy = devm_phy_create(dev, NULL, &ufs_mtk_phy_ops);
> > + if (IS_ERR(generic_phy))
> > + return PTR_ERR(generic_phy);
> > +
> > + phy_set_drvdata(generic_phy, phy);
> > +
> > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > +
> > + return PTR_ERR_OR_ZERO(phy_provider);
> > +}
> > +
> > +static const struct of_device_id ufs_mtk_phy_of_match[] = {
> > + {.compatible = "mediatek,mt8183-ufsphy"},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, ufs_mtk_phy_of_match);
> > +
> > +static struct platform_driver ufs_mtk_phy_driver = {
> > + .probe = ufs_mtk_phy_probe,
> > + .driver = {
> > + .of_match_table = ufs_mtk_phy_of_match,
> > + .name = "ufs_mtk_phy",
> > + },
> > +};
> > +module_platform_driver(ufs_mtk_phy_driver);
> > +
> > +MODULE_DESCRIPTION("Universal Flash Storage (UFS) MediaTek MPHY");
> > +MODULE_AUTHOR("Stanley Chu <stanley.chu-c+3QU6Y0cdFWk0Htik3J/w@public.gmane.org>");
> > +MODULE_LICENSE("GPL v2");
> > +
>
> spurious blank line.
Will remove it.
>
> Thanks
> Kishon
Thanks
Stanley
next prev parent reply other threads:[~2019-03-14 8:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-14 4:08 scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
[not found] ` <1552536516-12723-1-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-14 4:08 ` [PATCH v5 0/7] " Stanley Chu
[not found] ` <1552536516-12723-2-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-14 8:28 ` Avri Altman
[not found] ` <SN6PR04MB4925CDFC82326C5AB59E1629FC4B0-UKdxhu0+N/VnT3GYGerMaFM8qxBPnqtHvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2019-03-14 8:36 ` Stanley Chu
2019-03-14 4:08 ` [PATCH v5 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param Stanley Chu
2019-03-14 4:08 ` [PATCH v5 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param Stanley Chu
2019-03-14 4:08 ` [PATCH v5 3/7] scsi: ufs-hisi: " Stanley Chu
2019-03-14 4:08 ` [PATCH v5 4/7] dt-bindings: phy: Add document for phy-mtk-ufs Stanley Chu
[not found] ` <1552536516-12723-6-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-14 16:38 ` Rob Herring
2019-03-14 4:08 ` [PATCH v5 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek Stanley Chu
[not found] ` <1552536516-12723-7-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-15 23:27 ` Rob Herring
2019-03-14 4:08 ` [PATCH v5 6/7] phy: mediatek: Add UFS M-PHY driver Stanley Chu
[not found] ` <1552536516-12723-8-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-14 8:06 ` Kishon Vijay Abraham I
[not found] ` <a2b91daa-9391-1a81-a298-efcfcaccc775-l0cyMroinI0@public.gmane.org>
2019-03-14 8:29 ` Stanley Chu [this message]
2019-03-14 4:08 ` [PATCH v5 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1552552145.30977.62.camel@mtkswgap22 \
--to=stanley.chu-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=Chun-hung.Wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=avri.altman-Sjgp3cTcYWE@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=kuohong.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=liwei213-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=peter.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).