From: Lucas Stach <l.stach@pengutronix.de>
To: "Angus Ainslie (Purism)" <angus@akkea.ca>,
Fabio Estevam <festevam@gmail.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Carlo Caione" <ccaione@baylibre.com>,
"Abel Vesa" <abel.vesa@nxp.com>,
"Daniel Baluta" <daniel.baluta@nxp.com>,
"Guido Günther" <agx@sigxcpu.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] arm64: dts: fsl: imx8mq: enable the multi sensor TMU
Date: Thu, 21 Mar 2019 15:48:34 +0100 [thread overview]
Message-ID: <1553179714.4806.39.camel@pengutronix.de> (raw)
In-Reply-To: <20190321125252.4498-1-angus@akkea.ca>
Am Donnerstag, den 21.03.2019, 05:52 -0700 schrieb Angus Ainslie (Purism):
> Add the imx8mq TMU (Thermal management unit) nodes for CPU,
> GPU, and VPU.
>
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>
> Changes since v3:
>
> Moved the annotation.
>
> Changes since v2:
>
> Updated alert and critical temps for commercial parts.
> Fixed node names.
>
> Changes since v1:
>
> Removed references to multi sensor patch.
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 118 ++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index b39c6c75c043..81d5ce1b1ec1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/power/imx8mq-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
> #include "imx8mq-pinfunc.h"
>
> / {
> @@ -89,6 +90,7 @@
> > reg = <0x0>;
> > enable-method = "psci";
> > next-level-cache = <&A53_L2>;
> > + #cooling-cells = <2>;
> > };
>
> > > A53_1: cpu@1 {
> @@ -97,6 +99,7 @@
> > reg = <0x1>;
> > enable-method = "psci";
> > next-level-cache = <&A53_L2>;
> > + #cooling-cells = <2>;
> > };
>
> > > A53_2: cpu@2 {
> @@ -105,6 +108,7 @@
> > reg = <0x2>;
> > enable-method = "psci";
> > next-level-cache = <&A53_L2>;
> > + #cooling-cells = <2>;
> > };
>
> > > A53_3: cpu@3 {
> @@ -113,6 +117,7 @@
> > reg = <0x3>;
> > enable-method = "psci";
> > next-level-cache = <&A53_L2>;
> > + #cooling-cells = <2>;
> > };
>
> > A53_L2: l2-cache0 {
> @@ -210,6 +215,119 @@
> > #interrupt-cells = <2>;
> > };
>
> > > + tmu: tmu@30260000 {
> > + compatible = "fsl,imx8mq-tmu";
> > + reg = <0x30260000 0x10000>;
> > + interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> > + little-endian;
> > + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
> > + fsl,tmu-calibration = <0x00000000 0x00000023
> > + 0x00000001 0x00000029
> > + 0x00000002 0x0000002f
> > + 0x00000003 0x00000035
> > + 0x00000004 0x0000003d
> > + 0x00000005 0x00000043
> > + 0x00000006 0x0000004b
> > + 0x00000007 0x00000051
> > + 0x00000008 0x00000057
> > + 0x00000009 0x0000005f
> > + 0x0000000a 0x00000067
> > + 0x0000000b 0x0000006f
> +
> > + 0x00010000 0x0000001b
> > + 0x00010001 0x00000023
> > + 0x00010002 0x0000002b
> > + 0x00010003 0x00000033
> > + 0x00010004 0x0000003b
> > + 0x00010005 0x00000043
> > + 0x00010006 0x0000004b
> > + 0x00010007 0x00000055
> > + 0x00010008 0x0000005d
> > + 0x00010009 0x00000067
> > + 0x0001000a 0x00000070
> +
> > + 0x00020000 0x00000017
> > + 0x00020001 0x00000023
> > + 0x00020002 0x0000002d
> > + 0x00020003 0x00000037
> > + 0x00020004 0x00000041
> > + 0x00020005 0x0000004b
> > + 0x00020006 0x00000057
> > + 0x00020007 0x00000063
> > + 0x00020008 0x0000006f
> +
> > + 0x00030000 0x00000015
> > + 0x00030001 0x00000021
> > + 0x00030002 0x0000002d
> > + 0x00030003 0x00000039
> > + 0x00030004 0x00000045
> > + 0x00030005 0x00000053
> > + 0x00030006 0x0000005f
> > + 0x00030007 0x00000071>;
> > + #thermal-sensor-cells = <1>;
> > + };
> +
> > + thermal-zones {
> > + cpu-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <2000>;
> > + thermal-sensors = <&tmu 0>;
> +
> > + trips {
> > + cpu_alert: cpu-alert {
> > + temperature = <80000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> +
> > + cpu-crit {
> > + temperature = <90000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_alert>;
> > + cooling-device =
> > + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> +
> > + gpu-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <2000>;
> > + thermal-sensors = <&tmu 1>;
> +
> > + trips {
> > + gpu-crit {
> > + temperature = <90000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > + };
> +
> > + vpu-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <2000>;
> > + thermal-sensors = <&tmu 2>;
> +
> > + trips {
> > + vpu-crit {
> > + temperature = <90000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > + };
> > + };
> +
> > > wdog1: watchdog@30280000 {
> > compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
> > reg = <0x30280000 0x10000>;
next prev parent reply other threads:[~2019-03-21 14:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 21:31 [PATCH] arm64: dts: fsl: imx8mq: enable the thermal management unit (TMU) Angus Ainslie (Purism)
2019-03-12 2:35 ` Andrey Smirnov
2019-03-12 12:54 ` Angus Ainslie
2019-03-12 20:18 ` Angus Ainslie
2019-03-12 20:32 ` Fabio Estevam
2019-03-13 0:31 ` Andrey Smirnov
2019-03-18 15:48 ` [PATCH v2] " Angus Ainslie (Purism)
2019-03-18 16:04 ` [PATCH] arm64: dts: fsl: imx8mq: enable the multi sensor TMU Angus Ainslie (Purism)
2019-03-18 16:52 ` Fabio Estevam
2019-03-18 18:46 ` [PATCH v2] " Angus Ainslie (Purism)
2019-03-19 11:46 ` Lucas Stach
2019-03-19 15:10 ` [PATCH v3] " Angus Ainslie (Purism)
2019-03-19 16:18 ` Fabio Estevam
2019-03-21 12:52 ` [PATCH v4] " Angus Ainslie (Purism)
2019-03-21 14:48 ` Lucas Stach [this message]
2019-03-22 2:11 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553179714.4806.39.camel@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=abel.vesa@nxp.com \
--cc=agx@sigxcpu.org \
--cc=angus@akkea.ca \
--cc=ccaione@baylibre.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).