From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mickael Guene Subject: [PATCH v3 0/2] Add support for MIPID02 CSI-2 to PARALLEL bridge I2C device Date: Tue, 26 Mar 2019 11:03:38 +0100 Message-ID: <1553594620-88280-1-git-send-email-mickael.guene@st.com> References: <1552373045-134493-1-git-send-email-mickael.guene@st.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1552373045-134493-1-git-send-email-mickael.guene@st.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-media@vger.kernel.org Cc: hugues.fruchet@st.com, Mickael Guene , Mauro Carvalho Chehab , devicetree@vger.kernel.org, Todor Tomov , Nicolas Ferre , Tianshu Qiu , Ben Kao , Greg Kroah-Hartman , Matt Ranostay , Sakari Ailus , Petr Cvek , Hans Verkuil , Mark Rutland , Bingbu Cao , linux-kernel@vger.kernel.org, "David S. Miller" , Rob Herring , Rui Miguel Silva , Akinobu Mita List-Id: devicetree@vger.kernel.org Hi, This is the v3 of my MIPID02 series which introduces support of STMicroelectronics MIPID02 CSI-2 to PARALLEL I2C bridge. It allows using a CSI-2 sensor with a PARALLEL interface. Current driver implementation doesn't support CSI-2 second input port usage. It doesn't support also YUV420, RGB565 and RGB444 input formats. Thanks to Sakari for review. Changes in v3: - Fix potential wrong error code for mipid02_stream_disable and mipid02_stream_enable - Remove useless memset for ep in mipid02_parse_rx_ep and mipid02_parse_tx_ep - Add second CSI-2 input pad even if it's not yet supported - Add support of get_fmt, set_fmt and link_validate and only access subdev connected to mipid02 Changes in v2: - Add precision about first CSI-2 port data rate - Document endpoints supported properties - Rename 'mipid02@14' into generic 'csi2rx@14' in example - Merge MAINTAINERS patch 3 into patch 1 and 2 - Fix line too long in Kconfig - Add missing delay after reset release - Various style fixes - Fix mipid02_stream_enable returning no error when mipid02_find_sensor failed Mickael Guene (2): dt-bindings: Document MIPID02 bindings media:st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver .../bindings/media/i2c/st,st-mipid02.txt | 83 ++ MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 14 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/st-mipid02.c | 1012 ++++++++++++++++++++ 5 files changed, 1118 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt create mode 100644 drivers/media/i2c/st-mipid02.c -- 2.7.4